Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 9413427
Pinion Bearings

1984-2020 GM

Customer Questions & Expert Answers (32)
GM 9413427 Pinion Bearings
GM 9413427 Pinion Bearings
GM 9413427 Pinion Bearings
GM 9413427 Pinion Bearings
GM 9413427 Pinion Bearings
GM 9413427 Pinion Bearings
  • Part Description
    Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing
  • Manufacturer
    General Motors
Make sure this part fits
$56.84 MSRP: $109.76
You Save: $52.92 (49%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 9413427 Pinion Bearings is Ref No. 26 in the diagram below

    2001 Chevy Silverado 1500 HD Pinion Bearings Diagram for 9413427
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9413427

  • Vehicle Fitment

    Year Make Model Trim Engine
    1989, 1984-1987 Buick ElectraEstate Wagon, Limited, Park Avenue6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1990 Buick LeSabreCollector's Edition, Custom, Estate Wagon, Limited6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    2006-2007 Buick RainierCXL8 Cyl 5.3 L GAS
    1991-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1984 Cadillac DeVilleBase, Cabriolet, d'Elegance8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
    2002-2020 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2015-2020, 2003-2006 Cadillac Escalade ESVBase, Luxury, Platinum, Premium, Premium Luxury8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2002-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    1990, 1984 Cadillac Fleetwood60 Special, Brougham, Brougham d'Elegance, Formal8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 9413427 a good match for my vehicle? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 9413427 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the drive pinion bearings for the 2006 Buick Rainier? Posted by Customer
    A:
    Raise the vehicle and remove the differential, followed by the drive pinion from the axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after tightening the pinion nut for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    After removing the Flange and Pulley Holding Tool (J 8614-01), install the original shim or a 0.41 mm (0.016 inch) shim if the original is unavailable, then attach the pinion gear bearing retainer to the axle housing and tighten the retainer bolts to 88 Nm (65 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are needed to replace the drive pinion bearings for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Inner Bearing Race Installer (J 7818), Universal Driver Handle - 3/4 in - 10 (J 8092), Rear Pinion Bearing Race Installer (J 8611-01), Flange and Pulley Holding Tool (J 8614-01), Pinion Cup Bearing Installer - Rear (J 22306), Split Plate Bearing Puller (J 22912-B), Pinion Cone and Side Bearing Installer (J 24433), Inner Pinion Bearing Installer (J 36614), and Pinion Bearing Cup Installer (J 45870).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What components need to be removed after the differential assembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    The pinion gear bearing retainer, pinion yoke, oil seal, and outer pinion bearing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be removed after the brake components for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Next, remove the axle shafts and the differential assembly, then take out the drive pinion from the axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the installation process for the pinion gear pilot bearing for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Start with the pinion gear pilot bearing using the Differential Side Bearing Installer (J 22761).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are used for the installation of the outer pinion bearing cup for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Use the J8611-01 for the outer pinion bearing cup on the 8.6 inch axle or the J7818 for the 9.5 inch axle, along with the J8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after confirming the specified torque for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Rotate the pinion several times to ensure proper bearing seating, rechecking the torque and adjusting if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the target pinion end play during tightening for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten until the pinion end play is just taken up, rotating the pinion while tightening to seat the bearings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are used to install the inner pinion bearing cup for the 8.6 and 9.5 inch axles for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Use the J 45780 (Pinion Bearing Cup Installer) for the 8.6 inch axle and the J 22306 (Pinion Cup Bearing Installer-Rear) for the 9.5 inch axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How should the differential case be protected during installation for the 2004 Chevrolet S10? Posted by Customer
    A:
    Protect the differential case by placing the J8107-2 or J8107-4 on the side opposite the bearing installation.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Differential Bearing
    Q:
    What is the installation process for the new components for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Place the oil deflector into the inner pinion cup bore, then install the inner pinion bearing cup with the J 45704 and J 8092, followed by the outer pinion bearing cup using the J 7818 and J 8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What are the final steps after adjusting the pinion for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Reinstall the differential assembly, adjust the differential side bearing preload, determine the selective shim thickness for the drive pinion, adjust the backlash, fill the axle with lubricant, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the new pinion oil seal for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Use the J 22388 for 8.6 inch and 9.5 inch axles or J 44414 for 11.5 inch axle, then install the pinion into the axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after pressing the inner pinion bearing for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install a new collapsible spacer, lubricate the pinion bearings, and install the outer pinion bearing into the axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the next step after installing the outer pinion bearing for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install a new pinion oil seal using the J 22388 or J 44414.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after removing the pinion bearing for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the shim and both the outer and inner pinion bearing cups using a hammer and brass drift.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What are the final steps after replacing the drive pinion bearings for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Reinstall the differential assembly, adjust the differential side bearing preload, determine the selective shim thickness for the drive pinion, adjust the backlash, fill the axle with lubricant, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the outer pinion bearing and oil seal for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Use the Rear Axle Pinion Oil Seal Installer (J 22388) for both axle sizes.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after installing the inner pinion bearing for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Install a new collapsible spacer and lubricate the pinion bearings with the appropriate axle lubricant.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step to replace the Differential Drive Pinion Gear Bearing on a 10.5 Inch Axle for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Raise the vehicle and remove the differential assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the inner pinion bearing for the 2003 GMC Envoy? Posted by Customer
    A:
    Use the J24433 to install it, ensuring it seats on the pinion shim.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you seat the pinion yoke onto the pinion shaft for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Use a soft-faced hammer until a few threads show.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What are the final steps after replacing the drive pinion bearings for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the differential assembly, adjust the differential side bearing preload, determine the selective shim thickness for the drive pinion, adjust the backlash, fill the axle with lubricant, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How is a new pinion oil seal installed for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Use the Extension Housing Oil Pump/Seal Installer (J 38694).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step to replace the drive pinion bearings on 8.6, 9.5/9.5LD, and 11.5 inch axles for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are required to replace the drive pinion bearings on 8.6, 9.5/9.5LD, and 11.5 inch axles for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    The required tools are: J 7818, J 8092, J 8608, J 8611-01, J 8614-01, J 22306, J 22388, J 22912-B, J 24433, J 36614, J 44412, J 44414, J 45871, and J 45870.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the outer pinion bearing cup for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use the appropriate installer (J 8611-01, J 7818, or J 8608) and the J 8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the installation process for the inner pinion components for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Place the oil deflector into the inner pinion cup bore, then install the inner pinion bearing cup with the J 45704 and J 8092, followed by the outer pinion bearing cup using the J 7818 and J 8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the procedure for 8.6 inch axles for the 2004 GMC Sonoma? Posted by Customer
    A:
    Install the Pinion Bearing Remover (J45871) around the pinion bearing and the Split Plate Bearing Puller (J22912-01) in an inverted position around the Pinion Bearing Remover, then press the bearing off using both tools.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after installing the pinion bearing cups for the 2006 GMC Yukon? Posted by Customer
    A:
    Press the inner pinion bearing using the Pinion Cone and Side Bearing Installer (J 24433), install a new collapsible spacer, lubricate the pinion bearings, and place the outer pinion bearing into the retainer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pinion Bearings 9413427 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9413427 Pinion Bearings is available in the market under the name GM Pinion Bearing, Differential Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9413427 Pinion Bearings fits certain Chevrolet S10, C10, Tahoe models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, DeVille, Fleetwood and Buick LeSabre, Roadmaster, Electra models.
The original GM component designated by Manufacturer Part Number 9413427 maintains top performance when functioning as the Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing unit. The component 9413427 is constructed from durable material and its dimensions span 3.1 x 3.2 x 3.1 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear, Front, Outer Pinion Bearings; Differential Drive, Steering Knuckle King, Pinion Shaft, Front Axle Bearings.. The part 9413427 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.