Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 85126785
Axle Shaft Assembly, Front

1999-2013 GM

Customer Questions & Expert Answers (17)
GM 85126785 Axle Shaft Assembly, Front
  • Part Description
    Shaft Assembly-Front Wheel Drive Half
  • Position
    Front
  • Replaced By
    85775028
  • Replaces
    15868120, 26069242, 20875738
  • Manufacturer
    General Motors
Make sure this part fits
$343.45 MSRP: $584.72
You Save: $241.27 (42%)
1
ADD TO CART

  • 85126785 Axle Shaft Assembly, Front is Ref No. 2 in the diagram below

    2001 Chevy Silverado 1500 HD Axle Shaft Assembly, Front Diagram for 85126785
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 85126785

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2010 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 85126785 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 85126785 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done once the axle shaft is removed for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Take out the gasket and clean the axle shaft flange and the outside face of the hub assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft or gasket for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the installation process for the axle shaft for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Insert the axle shaft into the rear axle housing, ensuring the splines engage the differential side gear, and tap the end with a soft-faced mallet if needed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft and gasket for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    First, raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after removing the brake caliper for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Next, take off the rear cover and gasket, then remove the pinion shaft locking bolt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after raising for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require a screwdriver or related tool to push it off, and pushing the axle shaft inwards towards the gears can assist in this process.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft or gasket for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    First, remove the flange bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you create clearance for the C-lock for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential, and if necessary, tap it with a soft-faced mallet.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done once the axle shaft is free for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the gasket and clean the axle shaft flange along with the outside face of the hub assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after aligning the holes for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Install the new pinion shaft locking bolt, tightening it to 36 Nm (27 ft. lbs.) for the 8.6 inch axle or 50 Nm (37 ft. lbs.) for the 9.5/9.6LD inch axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the next step after aligning the lock for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential and remove the C-lock from the button end of the axle shaft before taking the axle shaft out of the housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should you do at the end of the process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Inspect and add axle lubricant to the axle housing if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after aligning the holes for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Install the new pinion shaft locking bolt, tightening it to 36 N.m (27 lb ft) for the 8.6 inch axle or 50 N.m (37 lb ft) for the 9.5/9.6LD inch axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done with the wheel drive shaft splined shank during installation for the 2004 GMC Yukon? Posted by Customer
    A:
    Insert the wheel drive shaft splined shank into the knuckle hub.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be reinstalled after securing the new axle shaft for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Reinstall the steering knuckle assembly, followed by the rear steering gear assembly, then the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft Assembly, Front 85126785 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 85126785 Axle Shaft Assembly, Front is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 85126785 Axle Shaft Assembly, Front fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 85126785 maintains top performance when functioning as the Shaft Assembly-Front Wheel Drive Half unit at its Front. The component 85126785 is constructed from durable material and its dimensions span 31.2 x 8.3 x 8.2 inches while weighing 32.70 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Assembly; Shaft Kit, Front Axle. The part 85126785 has available replacement options listed under 85775028 or 15868120, 26069242, 20875738. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.