Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 9417781
Pinion Bearings

1984-2019 GM

Customer Questions & Expert Answers (20)
GM 9417781 Pinion Bearings
  • Part Description
    Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing
  • Position
    Front Outer
  • Manufacturer
    General Motors
Make sure this part fits
$43.86 MSRP: $103.28
You Save: $59.42 (58%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 9417781 Pinion Bearings is Ref No. 28 in the diagram below

    1998 GMC Yukon Pinion Bearings Diagram for 9417781
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9417781

  • Vehicle Fitment

    Year Make Model Trim Engine
    1993-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.7 L GAS
    2002-2013, 1999-2000 Cadillac EscaladeBase, Luxury, Platinum, Premium8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1987-1994 Chevrolet BlazerBase, Cheyenne, Custom Deluxe, Scottsdale, Silverado, Silverado Sport8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1984-1986 Chevrolet C10Custom, Scottsdale, Silverado6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
    1984-1986 Chevrolet C10 SuburbanCustom, Scottsdale, Silverado8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 9417781 a good match for my vehicle? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 9417781 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the procedure for installing the pinion into the axle housing for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the pinion into the axle housing, applying sealant to the splines of the pinion yoke.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the replacement process for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly, followed by the pinion gear bearing retainer, pinion yoke, oil seal, outer pinion bearing, pinion, and collapsible spacer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the pinion for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Install the Pinion Driver (J22536) ensuring it is firmly seated on the pinion, then drive the pinion out using the Pinion Driver (J22536) and a hammer, taking care not to let the pinion fall out of the rear axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the new pinion oil seal for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install a new pinion oil seal with the Rear Axle Pinion Oil Seal Installer (J 44414).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after installing the pinion bearing cups for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Press the inner pinion bearing using the Pinion Cone and Side Bearing Installer (J 24433), install a new collapsible spacer, lubricate the pinion bearings, and place the outer pinion bearing into the retainer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What components need to be removed after the differential assembly for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the pinion gear bearing retainer, pinion yoke, and oil seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after seating the pinion yoke onto the pinion shaft for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the washer and a new pinion nut.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the replacement process for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are used for installing the inner and outer pinion bearing cups for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Use the Pinion Bearing Installer (J 37624) and Universal Driver Handle - 3/4 in - 10 (J 8092) for the inner pinion bearing cup, and the Rear Pinion Bearing Installer (J 8608) and Universal Driver Handle - 3/4 in - 10 (J 8092) for the outer pinion bearing cup.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the process for installing the inner pinion bearing cup for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Use the Rear Pinion Bearing Race Installer (J8608) along with the J8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the installation process for the new components for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Place the oil deflector into the inner pinion cup bore, then install the inner pinion bearing cup with the J 45704 and J 8092, followed by the outer pinion bearing cup using the J 7818 and J 8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How is the inner pinion bearing removed for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    The inner pinion bearing can be removed using the Split-Plate Bearing Puller (J22912-01) and a hydraulic press, followed by the removal of the pinion position shim.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the process for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly, pinion yoke, and pinion oil seal, followed by the thrust washer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after installing the inner pinion bearing for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Install a new collapsible spacer, lubricate the pinion bearings, and install the outer pinion bearing into the axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you measure the rotating torque of the pinion for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Use an inch-pound torque wrench to ensure it is between 1.0 - 2.3 Nm (10 - 20 inch lbs.) for used bearings or 1.7 - 3.4 Nm (15 - 30 inch lbs.) for new bearings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the process for the 2004 GMC Yukon? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly, pinion yoke, and pinion oil seal, followed by the thrust washer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are used for installing the outer pinion bearing cup for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Use the J 8611-01, J 7818, or J 8608 and J 8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the pinion bearing for the 9.5/9.5LD inch and 11.5 inch axles for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use the J 22912-B to press the bearing off.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be removed after the pinion for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the pinion preload shims, inner pinion bearing cup, and oil deflector with the J 45703 and J 42176, then remove the outer pinion bearing cup using the J 45705 and J 42176.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pinion Bearings 9417781 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9417781 Pinion Bearings is available in the market under the name GM Pinion Bearing, Differential Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9417781 Pinion Bearings fits certain Chevrolet C10, Tahoe, Impala models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Buick Roadmaster models.
The original GM component designated by Manufacturer Part Number 9417781 maintains top performance when functioning as the Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing unit at its Front Outer. The component 9417781 is constructed from durable material and its dimensions span 3.4 x 3.6 x 1.4 inches while weighing 1.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear, Front, Outer Pinion Bearing; Differential Drive Pinion Front, Drive Pinion, Pinion Shaft Front, Front Axle. The part 9417781 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.