Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25824250
Side Bearings

1984-2021 GM

Customer Questions & Expert Answers (34)
GM 25824250 Side Bearings
GM 25824250 Side Bearings
GM 25824250 Side Bearings
  • Part Description
    Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
  • Replaces
    09418390, 9418390
  • Manufacturer
    General Motors
Make sure this part fits
$65.71 MSRP: $128.64
You Save: $62.93 (49%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 25824250 Side Bearings is Ref No. 8 in the diagram below

    2005 Chevy Colorado Side Bearings Diagram for 25824250
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25824250

  • Vehicle Fitment

    Year Make Model Trim Engine
    1984-1986 Buick ElectraEstate Wagon, Limited, Park Avenue6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1986 Buick LeSabreCollector's Edition, Custom, Estate Wagon, Limited6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    1984 Cadillac DeVilleBase, Cabriolet, d'Elegance8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
    2002-2016 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2012 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    1984 Cadillac FleetwoodBrougham, Brougham d'Elegance, Formal8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 6.0 L GAS
    2007-2012 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25824250 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 25824250 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you tighten the pinion nut for the 2007 Buick Rainier? Posted by Customer
    A:
    Use J 8614-01 to hold the pinion yoke while tightening the nut until the pinion end play is just taken up.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the pinion gear pilot bearing for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Use the J 22761.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What steps follow the installation of the pinion bearing cups for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Press the inner pinion bearing onto the pinion with the Pinion Cone and Side Bearing Installer (J24433), install a new collapsible spacer, lubricate the pinion bearings, and place the outer pinion bearing into the retainer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the installation process for the pinion gear pilot bearing for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Start with the pinion gear pilot bearing using the Differential Side Bearing Installer (J 22761).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How should the differential assembly be secured for the 8.6 inch and 9.5 inch axles for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    For the 8.6 inch and 9.5 inch axles, install the differential assembly in a vise.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Differential Bearing
    Q:
    What should be done if the torque is below specifications for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Use the Flange and Pulley Holding Tool (J 8614-01) to tighten the pinion nut incrementally until the correct torque is achieved.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the next step after installing the outer pinion bearing for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Use the J 22388 to install a new pinion oil seal, then insert the pinion into the axle housing, applying sealant to the splines of the pinion yoke before installing it and aligning the marks made during removal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How should the differential case be protected during installation for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Protect the differential case by placing the J8107-2 or J8107-4 on the side opposite the bearing installation.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Differential Bearing
    Q:
    What are the final steps after installing the bearings for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Reinstall the differential assembly, fill the axle with the appropriate lubricant, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the target rotating torque for used bearings for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    1.0-2.3 N.m (10-20 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be removed from the axle housing after the drive pinion for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    The selective pinion shim and the outer and inner pinion bearing cups using a hammer and brass drift.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the shim and pinion bearing cups from the axle housing for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use a hammer and brass drift to work the outer and inner pinion bearing cups out evenly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the next step after installing the outer pinion bearing for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install a new pinion oil seal using the J 22388 or J 44414.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How is the pinion gear pilot bearing removed for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Use a brass drift and hammer to remove the pinion gear pilot bearing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after removing the differential side bearings for the 2004 Chevrolet S10? Posted by Customer
    A:
    Take the differential assembly out of the vise.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Differential Bearing
    Q:
    How do you install the inner and outer pinion bearing cups for the 2006 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the inner pinion bearing cup with the Pinion Bearing Installer (J 37624) and Universal Driver Handle - 3/4 in - 10 (J 8092), followed by the outer pinion bearing cup using the Rear Pinion Bearing Installer (J 8608) and Universal Driver Handle - 3/4 in - 10 (J 8092).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after ensuring the bearings are seated for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Recheck the torque and adjust if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done if the torque is below specifications for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Continue tightening the pinion nut in small increments until the correct torque is achieved.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after tightening the pinion nut for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the J 8614-01, install the original shim or a 0.41 mm shim if the original is unavailable, and attach the pinion gear bearing retainer to the axle housing, tightening the bolts to 88 Nm (65 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tool is used to install the inner pinion bearing for the 2008 GMC Canyon? Posted by Customer
    A:
    Use the J 24433 (Pinion Cone and Side Bearing Installer) to install the inner pinion bearing until it seats on the shim.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be measured after tightening the pinion nut for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Measure the rotating torque of the pinion to ensure it falls within the specified range.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the drive pinion from the axle for an 8.6-inch axle for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Install J 45871 around the pinion bearing and J 22912-B in an inverted position around J 45871, then press the bearing off using both tools.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the next step after inserting the outer pinion bearing for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Insert a new pinion oil seal using the Extension Housing Oil Pump/Seal Installer (J38694).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the outer pinion bearing cup for the 2003 GMC Envoy? Posted by Customer
    A:
    Use the J7817 or J8611-01 along with the J8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be determined before reinstalling the differential assembly for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Determine the thickness of the selective pinion shim and pinion preload shim for the drive pinion.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the inner pinion bearing for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Use the J 22912-B and a hydraulic press to remove the inner pinion bearing from the pinion, ensuring to insert a brass drift in the slots to evenly work the bearing cup out.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the torque specification for securing the pinion bearing retainer for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Tighten the bolts to 88 Nm (65 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the procedure for installing the pinion into the axle housing for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Apply sealant to the splines of the pinion yoke, install the pinion yoke, aligning the marks made during removal, and seat it by tapping with a soft-faced hammer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How should the differential case be protected during installation for the 2004 GMC Sonoma? Posted by Customer
    A:
    Protect the differential case by placing the J8107-2 or J8107-4 on the side opposite the bearing installation.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Differential Bearing
    Q:
    How do you ensure the pinion is properly adjusted for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Measure the rotating torque of the pinion, ensuring it falls within the specified range, and make adjustments as necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly, followed by the pinion yoke and pinion oil seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the process for the 2004 GMC Yukon? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly, pinion yoke, and pinion oil seal, followed by the thrust washer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the process for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly, pinion yoke, and pinion oil seal, followed by the thrust washer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Side Bearings 25824250 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25824250 Side Bearings is available in the market under the name GM Pinion Bearing, Differential Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25824250 Side Bearings fits certain Chevrolet S10, Colorado, Tahoe models, as well as GMC Sierra 1500, Yukon, Canyon. Additionally, it is compatible with Cadillac Escalade, DeVille, Fleetwood and Buick LeSabre, Electra, Rainier models.
The original GM component designated by Manufacturer Part Number 25824250 maintains top performance when functioning as the Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing unit. The component 25824250 is constructed from durable material and its dimensions span 4.3 x 4.3 x 2.1 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25824250 has available replacement options 09418390, 9418390. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.