How to replace the radiator fan and fan shroud on GMC Sierra 1500?

People should start the Radiator fan and shroud replacement process by removing the radiator inlet hose clip at the fan shroud before positioning the surge tank inlet hose clamp on the radiator while taking out the inlet hose connecting to the radiator. The first step involves removing the Radiator fan wiring harness clip before disconnecting all electrical connectors for the radiator fans. In case of need, proceed to open the engine oil cooler line clamp and extract the connecting lines from this attachment point. To proceed next remove the Radiator fan shroud bolts before extracting both the Radiator fan together with the shroud. To properly install the Radiator fan and shroud place their three lower tabs inside the radiator support flange while keeping the shroud parallel to the radiator. Secure the Radiator fan shroud bolts by torquing each one to 9 nm (80 inch lbs.). First install the cooler lines into the clip before closing it while connecting electrical connectors to the radiator fans. Reattach the wiring harness clip to the shroud while you install the surge tank inlet hose to the radiator which needs repositioning for the inlet hose clamp at the radiator before clip engagement at the fan shroud.

How to replace the radiator fan and fan shroud on GMC Yukon?

The procedure to change the Radiator fan and shroud (Non-HP2) must start by draining the cooling system fluid. Initiate the process by taking off the air inlet duct and separating the upper Radiator Hose from the Radiator before unclipping the Radiator inlet hose at the fan shroud location. The procedure requires moving the surge tank inlet hose clamp to different positioning before removing the surge tank inlet hose from the Radiator. To proceed with the replacement of the Radiator fan and shroud (Non-HP2) begin by disconnecting electrical connectors from Radiator fans while also removing the clip attaching wiring harness to the shroud and detaching transmission cooler lines bolts from fan shroud. Open the engine oil cooler line clip only if installation requires but also remove all cooler lines. To begin the Radiator fan shroud retainer bolts should be taken out followed by removing the Radiator fan and its shroud. Prepare installation by placing the three lower tabs into the Radiator support flange as you maintain the shroud in line with the Radiator. Fasten the Radiator fan to its position first before securing the shroud bolts at 9 n.m (80 lb in). Proceed by connecting the cooler lines through the clip before closing it yet continue by connecting electrical connectors to Radiator fans alongside fastening the wiring harness clip to the shroud. Twist all transmission cooling line bolts on the fan shroud into place until they reach 4 n.m (35 lb in) torque. The surge tank inlet hose needs installation onto the Radiator followed by adjusting the surge tank inlet hose clamp when needed. Hook the Radiator inlet hose clip at the fan shroud before reconnection of the upper Radiator Hose and air inlet duct installation. Finally, fill the cooling system.

OEM GMC Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

91 Radiator fans found

View related parts
GMC Fan Blade Part Number: 25919018
$94.58 MSRP: $194.37
You Save: $99.79 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Cooling; Radiator Fan Assembly; Fan, Engine Air Cooling(Electrical); Blade, Engine Cooling
Fits the following GMC Models:
- Sierra 2500 HD | 2011-2024 | AT4, AT4X, Base, Denali, Pro, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2011-2024 | AT4, Base, Denali, Pro, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Fan & Motor Part Number: 23419653
$457.89 MSRP: $828.78
You Save: $370.89 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Radiator Fan Assembly; Fan Assembly; Fan, Engine Air Cooling(Electrical)
Fits the following GMC Models:
- Acadia | 2017-2019 | Denali, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Fan Blade Part Number: 15877356
$152.66 MSRP: $313.72
You Save: $161.06 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Cooling; Radiator Fan Assembly; Blade, Engine Cooling
- Replaces: 15168635
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Fan Blade Part Number: 15229250
$192.80 MSRP: $396.20
You Save: $203.40 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Engine Cooling
- Replaces: 15161024
Fits the following GMC Models:
- Envoy | 2002-2009 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XL | 2002-2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
GMC Fan & Motor, Passenger Side Part Number: 84543313
$171.72 MSRP: $310.80
You Save: $139.08 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Replaced by: 85600145
Fits the following GMC Models:
- Sierra 1500 | 2020 | AT4, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Fan Blade Part Number: 84945674
$88.61 MSRP: $165.34
You Save: $76.73 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Cooling; Blade, Engine Cooling
- Replaces: 84890705, 23182724
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Fan & Motor, Passenger Side Part Number: 84580369
$152.11 MSRP: $285.66
You Save: $133.55 (47%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Engine Cooling Fan; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Replaced by: 86778037
Fits the following GMC Models:
- Sierra 1500 | 2021-2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
View More
View related parts
GMC Fan & Motor Part Number: 84530771
$233.44 MSRP: $438.36
You Save: $204.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Cooling; Radiator Fan Assembly; Blade, Engine Cooling
Fits the following GMC Models:
- Canyon | 2021-2022 | Elevation, Elevation Standard | 4 Cyl 2.5 L GAS
View related parts
GMC Fan Blade, Passenger Side Part Number: 25952781
$101.45 MSRP: $185.22
You Save: $83.77 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly; Blade, Engine Air Cooling(Electrical); Blade, Engine Cooling
- Position: Passenger Side
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Fan Blade, Passenger Side Part Number: 20897350
$82.29 MSRP: $169.10
You Save: $86.81 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon | 2010-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
- Yukon XL 1500 | 2010-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
- Yukon XL 2500 | 2010-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX
View More
View related parts
GMC Fan & Motor, Driver Side Part Number: 84120617
$215.07 MSRP: $403.88
You Save: $188.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Radiator Fan Assembly; Fan Motor
- Position: Driver Side
- Replaced by: 85747059
Fits the following GMC Models:
- Sierra 1500 | 2019-2020 | AT4, Base, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Fan Blade, Passenger Side Part Number: 20903473
$38.88 MSRP: $79.90
You Save: $41.02 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | SL, SLE, WT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS
- Yukon | 2010-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
- Yukon XL 1500 | 2010-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
- Yukon XL 2500 | 2010-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX
View More
View related parts
GMC Fan & Motor Part Number: 85159687
$426.96 MSRP: $772.78
You Save: $345.82 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Fan Assembly; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaced by: 86578077
- Replaces: 84826494, 84595304
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Fan & Motor Part Number: 85159684
$226.44 MSRP: $425.24
You Save: $198.80 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Fan Assembly; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaced by: 86578078
Fits the following GMC Models:
- Acadia | 2020-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Fan Blade, Driver Side Part Number: 25952780
$46.58 MSRP: $84.30
You Save: $37.72 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly; Blade, Engine Air Cooling(Electrical); Blade, Engine Cooling
- Position: Driver Side
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Fan Assembly Part Number: 84847895
$265.01 MSRP: $544.58
You Save: $279.57 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Radiator Fan Assembly; Cooling Fan Module; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaces: 84581335
Fits the following GMC Models:
- Terrain | 2020 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Fan Blade, Driver Side Part Number: 20897351
$90.92 MSRP: $170.74
You Save: $79.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Driver Side
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon | 2010-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
- Yukon XL 1500 | 2010-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
- Yukon XL 2500 | 2010-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX
View More
View related parts
GMC Fan Blade Part Number: 23331305
$107.94 MSRP: $202.70
You Save: $94.76 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Cooling; Radiator Fan Assembly; Blade, Engine Cooling
- Replaced by: 86532392
Fits the following GMC Models:
- Savana 2500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Savana 3500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
View related parts
GMC Fan Blade Part Number: 15127056
$74.55 MSRP: $153.20
You Save: $78.65 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Blade, Engine Cooling
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS
View related parts
GMC Fan Blade Part Number: 84012677
$134.64 MSRP: $276.69
You Save: $142.05 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Cooling; Radiator Fan Assembly; Blade, Engine Cooling
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL

| Page 1 of 5 |Next >

1-20 of 91 Results

GMC Radiator fan

Choose OEM Radiator fan, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Radiator fan. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Radiator fan Parts and Q&A

Fan Blade
89023366
Q: How to replace the radiator fan and fan shroud on GMC Sierra 1500?
A:
People should start the Radiator fan and shroud replacement process by removing the radiator inlet hose clip at the fan shroud before positioning the surge tank inlet hose clamp on the radiator while taking out the inlet hose connecting to the radiator. The first step involves removing the Radiator fan wiring harness clip before disconnecting all electrical connectors for the radiator fans. In case of need, proceed to open the engine oil cooler line clamp and extract the connecting lines from this attachment point. To proceed next remove the Radiator fan shroud bolts before extracting both the Radiator fan together with the shroud. To properly install the Radiator fan and shroud place their three lower tabs inside the radiator support flange while keeping the shroud parallel to the radiator. Secure the Radiator fan shroud bolts by torquing each one to 9 nm (80 inch lbs.). First install the cooler lines into the clip before closing it while connecting electrical connectors to the radiator fans. Reattach the wiring harness clip to the shroud while you install the surge tank inlet hose to the radiator which needs repositioning for the inlet hose clamp at the radiator before clip engagement at the fan shroud.
Fan Blade
15780793
Q: How to replace the radiator fan and fan shroud on GMC Yukon?
A:
The procedure to change the Radiator fan and shroud (Non-HP2) must start by draining the cooling system fluid. Initiate the process by taking off the air inlet duct and separating the upper Radiator Hose from the Radiator before unclipping the Radiator inlet hose at the fan shroud location. The procedure requires moving the surge tank inlet hose clamp to different positioning before removing the surge tank inlet hose from the Radiator. To proceed with the replacement of the Radiator fan and shroud (Non-HP2) begin by disconnecting electrical connectors from Radiator fans while also removing the clip attaching wiring harness to the shroud and detaching transmission cooler lines bolts from fan shroud. Open the engine oil cooler line clip only if installation requires but also remove all cooler lines. To begin the Radiator fan shroud retainer bolts should be taken out followed by removing the Radiator fan and its shroud. Prepare installation by placing the three lower tabs into the Radiator support flange as you maintain the shroud in line with the Radiator. Fasten the Radiator fan to its position first before securing the shroud bolts at 9 n.m (80 lb in). Proceed by connecting the cooler lines through the clip before closing it yet continue by connecting electrical connectors to Radiator fans alongside fastening the wiring harness clip to the shroud. Twist all transmission cooling line bolts on the fan shroud into place until they reach 4 n.m (35 lb in) torque. The surge tank inlet hose needs installation onto the Radiator followed by adjusting the surge tank inlet hose clamp when needed. Hook the Radiator inlet hose clip at the fan shroud before reconnection of the upper Radiator Hose and air inlet duct installation. Finally, fill the cooling system.