Other Name: Belt-Fan; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
Replaces: 12576448
Fits the following GMC Models:
Sierra 1500 | 2009-2013, 2005-2006 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Sierra 1500 Classic | 2007 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
Sierra 2500 HD | 2009-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Sierra 3500 HD | 2009-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Yukon | 2008-2013 | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Other Name: Belt, Fan; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt; Belt, Drive
Fits the following GMC Models:
C1500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
C2500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
K2500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Belt, Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
Replaces: 88986820, 12568057, 12555074
Fits the following GMC Models:
C2500 | 1996-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
C2500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 7.4 L GAS
C3500 | 1996-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
K2500 | 1996-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
K2500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 7.4 L GAS
K3500 | 1996-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
View More
| Page 1 of 7 |Next >
1-20 of 136 Results
GMC Drive Belt
Choose OEM Drive Belt, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Drive Belt. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the Drive Belt on a V8 engine on GMC Sierra 1500?
A:
The first step to replace the air conditioning compressor belt for v8 engines requires removal of the accessory Drive Belt together with the skid plate. Disconnect the old belt which links the air conditioning and crankshaft pulleys. Lay the new belt at the rear part of the balancer where it remains clear of the a/c pulley contact. Position the belt installation tool to the balancer before sliding it upwards to place the belt on the tool. You should move the tool downward to give the belt proper placement on the a/c pulley but maintain only minimal tension. The ribbed surface of the belt must be positioned facing forward at the bottom of its installation. Finger pressure alongside clockwise turning of the Crankshaft Pulley will help pull the belt forward until the ribbed section covers the a/c pulley correctly. Check the Drive Belt alignment when installed correctly. Proceed to turn the balancer another 360 degrees for correct positioning inspection. The final stage consists of reattaching both the skid plate along with the accessory Drive Belt.
Q: How to replace the accessory drive belt on GMC Yukon?
A:
The first step for accessory Drive Belt replacement starts with unfastening the air cleaner outlet duct clamps at the Throttle Body and maf/iat sensor before disconnection the radiator inlet hose clip from the outlet duct and subsequent removal of the air cleaner outlet duct. Use a breaker bar equipped with a hex-head socket on the Drive Belt tensioner bolt to turn it clockwise and tension the belt will decrease. After releasing the tension on the Drive Belt tensioner remove the breaker bar and socket. Then take off the belt from pulleys as well as the Drive Belt tensioner. The inspection should cover belt surfaces on all pulleys for cleanliness. The installer should start by placing the Drive Belt properly on all pulleys without the idler pulley followed by inserting the breaker bar with hex-head socket onto the belt tensioner bolt to achieve tension release through clockwise rotation. Follow these steps to install the Drive Belt under the idler pulley and gradually let go of the tension on the belt tensioner before taking out the breaker bar along with the socket. A proper check of the Drive Belt should happen alongside its correct positioning alignment where the arrow at the Throttle Body end of the duct matches the Throttle Body attaching stud . After that, install the air cleaner outlet duct. Before the end of the installation process, attach the radiator inlet hose clip to the outlet duct while tightening all Throttle Body and maf/iat sensor clamp screws to 7 nm (62 inch lbs.).