To change the engine oil and Oil Filter first, jack the vehicle and support it then place the drain pan below the Oil Pan Drain Plug. Remove Oil Pan Drain Plug and drain the oil completely, reinstall the Oil Pan Drain Plug and tighten it to 20n.m (15lb ft). Then, position the drain pan at the bottom of the Oil Filter and drain off the oil using a barb light entirely without the filtration. Lubricate the new Oil Filter gasket with clean engine oil and tighten the Oil Filter to 30n.m (22 lb ft). Lower the vehicle, fill with oil up to the mark, start the engine and check for leaks.