Make sure this part fits

GM 12731179
Oil Filter

1984-2012 GM

Customer Questions & Expert Answers (20)
GM 12731179 Oil Filter
  • Part Description
    Filter, Engine Oil Filter
  • Replaces
    06437462, 19210285, 89017342, 19256044, 25014377, 6437462, 25010324
  • Manufacturer
    General Motors
Make sure this part fits
$5.94 MSRP: $10.60
You Save: $4.66 (44%)
Ships in 1-2 Business Days
12
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1984-1989 Buick ElectraEstate Wagon, Limited, Park Avenue6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    2005-2007 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    1984-1990 Buick LeSabreCollector's Edition, Custom, Estate Wagon, Limited6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    1985-1987 Buick RegalBase, Limited8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    2004-2006 Buick RendezvousCX, CXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    1984-1985 Buick RivieraBase, Luxury, T-Type6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    2006-2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1993 Cadillac 60 SpecialBase8 Cyl 4.9 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12731179 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12731179 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you install the oil filter cap for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Use a six-point socket to install the oil filter cap, tightening it to 25 Nm (18 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should be exercised caution regarding during this process for the 2010 Buick Lucerne? Posted by Customer
    A:
    Fasteners to avoid vehicle damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should you do after draining the oil for the 2005 Buick Rainier? Posted by Customer
    A:
    Use a suitable wrench to remove the oil filter, ensuring the filter seal is not left on the engine block.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What is the next step after tightening the oil pan drain plug for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Place the drain pan under the oil filter and remove the oil filter, allowing the oil to drain completely.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should be done if the oil level needs adjustment for the 2007 Buick Terraza? Posted by Customer
    A:
    Adjust the oil level by adding or draining oil, and check for oil leaks.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should you do after removing the oil drain plug for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Clean and inspect the engine oil drain plug, replacing it if necessary, and clean and inspect the sealing surface on the oil pan, repairing or replacing the oil pan if needed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What is the final step after lowering for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Fill the engine with new engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should be done after removing the drain plug for the 2010 Cadillac DTS? Posted by Customer
    A:
    Clean and inspect the drain plug, replacing it if necessary, and clean and inspect the sealing surface on the oil pan, repairing or replacing the oil pan if needed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    How do you prime the lubrication system after oil pump removal for the 2002 Cadillac Seville? Posted by Customer
    A:
    Ensure the engine oil is at the proper level (7 quarts with the oil filter full) and fill if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    How do you install the new oil filter cartridge for the 2008 Cadillac STS? Posted by Customer
    A:
    Install the NEW oil filter cartridge, ensuring to lubricate the threads of the oil filter cap with clean engine oil before installation.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should you do after removing the drain plug for the 2009 Cadillac XLR? Posted by Customer
    A:
    Clean and inspect the drain plug, replacing it if necessary, and clean and inspect the sealing surface on the oil pan, repairing or replacing the oil pan if needed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    How should the oil filter cap be prepared before installation for the 2009 Cadillac SRX? Posted by Customer
    A:
    Lubricate the threads of the oil filter cap with clean engine oil to prevent damage and facilitate future removal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    How should the new oil filter be prepared and installed for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Apply clean engine oil to the NEW oil filter gasket and install the NEW oil filter, tightening it to 10 N.m (89 lb in) plus an additional 150 degrees.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should you do after turning off the engine for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Allow the oil to drain back into the oil pan for a few minutes.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should you avoid using on the hex on top of the oil filter cap for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    An open-end wrench.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should be done before installing the new oil filter for the 2005 GMC Canyon? Posted by Customer
    A:
    Lubricate the new oil filter seal with clean engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    How do you remove the oil filter for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Use a suitable wrench to remove the oil filter, ensuring that the filter seal is not left on the engine block.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    What should be applied to the new oil filter gasket for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Clean engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    Q:
    How do you drain the old oil for the 2002 GMC Envoy? Posted by Customer
    A:
    Remove the oil pan drain plug and collect the oil in a suitable container.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Filter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Oil Filter 12731179 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12731179 Oil Filter is available in the market under the name GM Oil Filter. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12731179 Oil Filter fits certain Chevrolet Colorado, C10, Malibu models, as well as GMC Canyon, Envoy, Caballero. Additionally, it is compatible with Cadillac Allante, XLR, SRX and Buick Regal, Riviera, LaCrosse models.
The original GM component designated by Manufacturer Part Number 12731179 maintains top performance when functioning as the Filter, Engine Oil Filter unit. The component 12731179 is constructed from durable material. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Filter. The part 12731179 has available replacement options 06437462, 19210285, 89017342, 19256044, 25014377, 6437462, 25010324. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.