C10 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
C20 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
C30 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
Caprice | 1984-1990 | Base, Classic, Classic Brougham, Classic LS Brougham | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
Colorado | 2004-2012 | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
El Camino | 1984 | Base, Conquista, SS | 8 Cyl 5.7 L DIESEL
Impala | 2006-2011, 1984-1985 | 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
K10 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
K20 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
K30 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
View More
| Page 1 of 3 |Next >
1-20 of 54 Results
Chevrolet Oil Filter
Choose OEM Oil Filter, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Oil Filter. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to Replace an Engine Oil Filter on Chevrolet Colorado?
A:
Before beginning the engine oil and Oil Filter replacement process start by removing the oil fill cap while securely raising the vehicle. Start by wiping away dirt from the oil pan Drain Plug location and put a drain pan beneath it properly. Begin by draining all the oil from the oil pan through the Drain Plug and then clean and test the Drain Plug before replacing it with proper installation of the sealing surface. The Drain Plug hole requires wiping clean before slowly torque-down the Drain Plug to its secure position. A container must be placed under the engine Oil Filter drain deflector and a suitable drain pan should be positioned beneath the Oil Filter. Take out the Oil Filter while checking for an intact gasket or select to remove the gasket from the adapter. The new Oil Filter requires a coat of clean engine oil and proper installation followed by tension setting to 10 nm (89 lb in) with an additional 150 degrees torque. Use a cloth to remove all oil residue from the Oil Filter drain deflector before fastening the oil pan Drain Plug at 26 nm (19 lb ft) torque. Afterward, remove the drain pan beneath the vehicle. Find a low position for the vehicle while feeding new engine oil into the engine until it reaches the correct level. Start the engine to spot possible leakages. Shut down the engine while allowing engine oil to return back into the oil pan for a period of several minutes. After cleaning the indicator tool you should reposition it on the tube so its handle meets the top. Check the oil level by reinstalling the indicator but maintain its tip in a downward position. Adjust the oil level if necessary. Before ending the procedure you must inspect for any signs of oil leaks then safely install the oil fill cap.
Q: How to replace the engine oil and oil filter on Chevrolet S10?
A:
The process of replacing engine oil requires support for the vehicle and must begin by raising it. A suitable container should receive the engine oil when you remove the Drain Plug from the oil pan. If your vehicle has 2wd you should extract the Oil Filter from the Oil Filter adapter and four-wheel drive systems require uninstallation of the Oil Filter from the remote Oil Filter adapter through the access panel on the steering linkage shield. The removal of the Oil Filter gasket is necessary before proceeding. Clean engine oil should be used to lubricate the Oil Filter gasket. The installation of rwd oil filters goes to the Oil Filter adapter and four-wheel drive oil filters are installed on the remote Oil Filter adapter following the filter instructions for torque. Fasten the oil pan Drain Plug into its place by using 25 nm (18 ft. Lbs.) torque. Lower the vehicle to then fill the crankcase with proper quantity and quality of engine oil. Engine operation involves leak inspection along with oil pressure checks and the four-wheel drive vehicles require the access panel in the steering linkage shield closed for safety.