How to replace the Camshaft Position Sensor for Bank 1 (Right Side) Exhaust on GMC Acadia?

The first step to replace the Bank 1 (Right Side) Exhaust Camshaft Position Sensor involves removing both the engine mount strut and bracket. The process begins by disconnecting the engine wiring harness electrical connector from the bank 1 exhaust camshaft position (CMP) sensor. After disconnection you can remove the CMP sensor bolt and sensor. You should start CMP sensor and bolt installation by tightening the bolt to 10 N.m (89 lb in). The procedure ends with a connection of the engine wiring harness electrical connector to the bank 1 exhaust CMP sensor and the reinstatement of engine mount strut and bracket.

How to replace the Camshaft Position Sensor on GMC Sierra 1500?

The initial step to replace the Camshaft Position Sensor includes removing ignition coil wires and Spark Plug Wires from the Distributor by turning the boot of the spark plug wire 1/2 turn and extracting it through the boot alone or utilizing a suitable tool. You must disconnect the cmp sensor electrical connector followed by removing the Distributor Cap screws before taking out the Distributor Cap. Begin the process by removing rotor screws and rotor while achieving correct position between reluctor wheel's square slot and cmp sensor. The procedure requires removing cmp screws before taking out the cmp sensor. Fresh threadlock-coated screws must be applied during installation instead of using past components including screws and the Distributor Cap and cmp sensor. Place the cmp sensor into the reluctor wheel slot and attach brand-new cmp screws which require tightening at 2.2 n.m (19 lb in). New rotor screws should be installed to 2 n.m (18 lb in) torque before the Distributor Cap receives new screws secured to 2.4 n.m (21 lb in). Before completion, reattach the cmp sensor electrical connector along with the attachment of Spark Plug Wires and ignition coil wire to the Distributor.

OEM GMC Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Camshaft Position Sensors found

View related parts
GMC Camshaft Position Sensor Part Number: 12597253
$56.72 MSRP: $115.20
You Save: $58.48 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
Fits the following GMC Models:
- Canyon | 2008-2012 | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
- Envoy | 2008-2009 | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Camshaft Position Sensor, Green Line Part Number: 12674704
$45.19 MSRP: $91.80
You Save: $46.61 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12577245
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
GMC Camshaft Position Sensor Part Number: 12636947
$22.17 MSRP: $41.64
You Save: $19.47 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2017-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 12608424
$37.04 MSRP: $69.56
You Save: $32.52 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
Fits the following GMC Models:
- Acadia | 2007-2009 | SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Camshaft Position Sensor Part Number: 12638266
$37.42 MSRP: $76.01
You Save: $38.59 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
Fits the following GMC Models:
- Acadia | 2017-2021 | SL, SLE, SLT | 4 Cyl 2.5 L GAS
- Canyon | 2015-2022 | Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS
- Terrain | 2018-2020 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 97365038
$81.66 MSRP: $165.86
You Save: $84.20 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
Fits the following GMC Models:
- Savana 2500 | 2006-2013 | Base | 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2006-2013 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD | 2006-2016 | Base, Denali, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2006 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2016 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Engine Camshaft Position Sensor Part Number: 12623093
$18.72 MSRP: $35.16
You Save: $16.44 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly Camshaft Position; Camshaft Sensor
Fits the following GMC Models:
- Savana 2500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- Savana 3500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- Sierra 1500 | 2014-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Sierra 1500 Limited | 2019 | Base, SLE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Yukon | 2015-2023 | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2015-2023 | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 55580466
$13.39 MSRP: $25.14
You Save: $11.75 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaced by: 95530783
Fits the following GMC Models:
- Terrain | 2018-2019 | SLE, SLT | 4 Cyl 1.6 L DIESEL
View related parts
GMC Camshaft Position Sensor Part Number: 12646782
$18.39 MSRP: $34.54
You Save: $16.15 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.6 L GAS
- Canyon | 2017-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Camshaft Position Sensor Part Number: 12684186
$17.38 MSRP: $35.30
You Save: $17.92 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12615371
Fits the following GMC Models:
- Acadia | 2010-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
- Canyon | 2015-2016 | Base, SLE, SLT | 6 Cyl 3.6 L GAS
- Terrain | 2010-2017 | Denali, SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 12637869
$21.95 MSRP: $41.22
You Save: $19.27 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaced by: 24591946
Fits the following GMC Models:
- Canyon | 2016-2022 | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
- Savana 2500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
- Savana 3500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View More
View related parts
GMC Camshaft Position Sensor Part Number: 12672642
$26.15 MSRP: $49.10
You Save: $22.95 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 98079566
Fits the following GMC Models:
- Savana 2500 | 2010-2016 | Base | 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2010-2016 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD | 2015-2016 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015-2016 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Camshaft Position Sensor Part Number: 12698173
$13.23 MSRP: $24.84
You Save: $11.61 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 12733487
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL
- Sierra 1500 Limited | 2022 | AT4, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon | 2021-2023 | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 25366551
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaces: 25339321, 97226121
Fits the following GMC Models:
- Sierra 2500 HD | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Camshaft Position Sensor Part Number: 19417445
$69.96 MSRP: $124.92
You Save: $54.96 (44%)
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
Fits the following GMC Models:
- C1500 | 1997-1999 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C1500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C2500 | 1997-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C3500 | 1997-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- Jimmy | 1995-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1997-1999 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- K1500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K2500 | 1997-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 12584516
$73.95 MSRP: $132.06
You Save: $58.11 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor
Fits the following GMC Models:
- Canyon | 2007 | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Camshaft Position Sensor Part Number: 97321398
$80.65 MSRP: $126.33
You Save: $45.68 (37%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
Fits the following GMC Models:
- Sierra 2500 HD | 2005 | Base, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2005 | Base, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Camshaft Position Sensor Part Number: 10456617
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 10456250
Fits the following GMC Models:
- Sonoma | 1996-2003 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View related parts
GMC Camshaft Position Sensor Part Number: 12575183
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaces: 12572657
Fits the following GMC Models:
- Sierra 2500 HD | 2003-2004 | Base, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2003-2004 | Base, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2003-2004 | SLE, SLT | 8 Cyl 8.1 L GAS
View More
View related parts
GMC Camshaft Position Sensor Part Number: 12576519
$73.95 MSRP: $132.06
You Save: $58.11 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
Fits the following GMC Models:
- Canyon | 2007 | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
- Envoy | 2006-2007 | SLE, SLT | 6 Cyl 4.2 L GAS
- Envoy XL | 2006 | SLE, SLT | 6 Cyl 4.2 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 23 Results

GMC Camshaft Position Sensor

Choose OEM Camshaft Position Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Camshaft Position Sensor. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
12608424
Q: How to replace the Camshaft Position Sensor for Bank 1 (Right Side) Exhaust on GMC Acadia?
A:
The first step to replace the Bank 1 (Right Side) Exhaust Camshaft Position Sensor involves removing both the engine mount strut and bracket. The process begins by disconnecting the engine wiring harness electrical connector from the bank 1 exhaust camshaft position (CMP) sensor. After disconnection you can remove the CMP sensor bolt and sensor. You should start CMP sensor and bolt installation by tightening the bolt to 10 N.m (89 lb in). The procedure ends with a connection of the engine wiring harness electrical connector to the bank 1 exhaust CMP sensor and the reinstatement of engine mount strut and bracket.
Camshaft Position Sensor
19417445
Q: How to replace the Camshaft Position Sensor on GMC Sierra 1500?
A:
The initial step to replace the Camshaft Position Sensor includes removing ignition coil wires and Spark Plug Wires from the Distributor by turning the boot of the spark plug wire 1/2 turn and extracting it through the boot alone or utilizing a suitable tool. You must disconnect the cmp sensor electrical connector followed by removing the Distributor Cap screws before taking out the Distributor Cap. Begin the process by removing rotor screws and rotor while achieving correct position between reluctor wheel's square slot and cmp sensor. The procedure requires removing cmp screws before taking out the cmp sensor. Fresh threadlock-coated screws must be applied during installation instead of using past components including screws and the Distributor Cap and cmp sensor. Place the cmp sensor into the reluctor wheel slot and attach brand-new cmp screws which require tightening at 2.2 n.m (19 lb in). New rotor screws should be installed to 2 n.m (18 lb in) torque before the Distributor Cap receives new screws secured to 2.4 n.m (21 lb in). Before completion, reattach the cmp sensor electrical connector along with the attachment of Spark Plug Wires and ignition coil wire to the Distributor.