How to replace the Neutral Safety Switch on the 4L60-E/4L65-E/4L70-E automatic transmission on GMC Sierra 1500?

The first step to change the park/neutral position switch for 4l60-e/4l65-e/4l70-e automatic transmissions requires users to engage the parking brake and set the transmission to neutral. Drivers with 4-wheel drive vehicles must remove the front propeller shaft before proceeding. Begin by raising and properly supporting the vehicle then remove the park/neutral position (PNP) switch electrical connector. Start by removing the manual shaft lever nut before taking out the transmission control lever from the manual shaft. Next, remove the pnp switch bolts and take off the pnp switch from the manual shaft; use a file to smooth the edge of the manual shaft because if the pnp switch does not easily slide off. Put the pnp switch in position on the manual shaft's flat sections and push it until the mounting bracket touches the transmission bosses. A new pnp switch includes a built-in positive assurance bracket so the park neutral switch aligner (J 41364-A) becomes redundant during installation. Attach the park neutral switch aligner (J 41364-A) to the pnp switch after installing its bolts hand-tight. The adapter should sit on the pnp switch while the two slots on the tool should match the lower tabs on it. Secure the two bolts with torque at 25 n.m (18 lb ft) while rotating the tool until its upper locator pin matches the slot on the switch top. Take out both the park neutral switch aligner j 41364-a and the positive assurance bracket if present. Crank the transmission control lever onto the manual shaft by installing its nut to a torque of 25 n.m (18 lb ft). Next, reconnect the pnp switch electrical connector. If the vehicle has 4wd, reinstall the front propeller shaft, lower the vehicle, and check the switch for proper operation, ensuring the engine starts only in the park (P) or neutral (N) positions; the switch warrants replacement in cases where it fails to function properly.

How to replace the Neutral Safety Switch on the 4L60-E/4L65-E transmission on GMC Yukon?

Start by applying the park brake followed by shifting the transmission into neutral before replacing the park/neutral position switch on the 4l60-e/4l65-e transmission. Vehicles equipped with 4-wheel drive require the removal of the front propeller shaft before proceeding. Begin by safely elevating the vehicle before disconnecting the electrical connector for the park/neutral position (PNP) switch. Start by removing the manual shaft lever nut followed by the transmission control lever from the manual shaft. Next, remove the pnp switch bolts and take the pnp switch off the manual shaft; file the manual shaft's outer edge with a file to smooth any surface burrs when the manual shaft resists sliding off easily. Installation begins with aligning the pnp switch to the manual shaft flats before sliding it onto the shaft until the switch mounting bracket engages with the transmission mounting bosses. A brand-new pnp switch installs with a positive assurance bracket so the park neutral switch aligner becomes unnecessary. Centrally torque the pnp switch bolts first, then utilize the park neutral switch aligner (J 41364-A) to align switch slots with tool lower tabs. Follow by rotating the tool to allow its upper locating pin to face towards the switch top. Tighten the bolts to 25 nm (18 ft. Lbs.). First remove the park neutral switch aligner (J 41364-A) and eliminate the positive assurance bracket (if present) from the system. Reinstall the transmission control lever onto the manual shaft with the nut, tightening it to 25 nm (18 ft. Lbs.)reconnect the pnp switch electrical connector after reattaching the pnp switch. If the vehicle has 4wd, reinstall the front propeller shaft, lower the vehicle, and check the switch for proper operation, ensuring the engine starts only in the park (P) or neutral (N) positions; replace the switch when it fails to operate correctly.

OEM GMC Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Neutral Safety Switches found

View related parts
GMC Back-Up Switch Part Number: 19152823
$14.18 MSRP: $34.18
You Save: $20.00 (59%)
ADD TO CART
Product Specifications
- Other Name: Switch, Back Up Lamp; Back Up Light Switch; Switch, Transmission Safety Starting or Speed Sensing; Safety Start/Warning Switch.
- Replaces: 88996477, 23049569
Fits the following GMC Models:
- C1500 | 1988-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1988-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Jimmy | 1994-2001, 1991 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K1500 | 1988-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1988-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 29540479
$189.55 MSRP: $300.94
You Save: $111.39 (38%)
ADD TO CART
Product Specifications
- Other Name: Switch Kit, Transmission Safety Starting Switch Or Speed Sensing; Switch Kit, Safety Starting Switch; Transmission Safety Start/Warning; Back Up Lamp
- Replaced by: 19540535
Fits the following GMC Models:
- Sierra 1500 | 2003-2004 | Base, Denali, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 2003-2004 | Base, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2003-2004 | Base, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2003-2004 | Base, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2003-2004 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2003-2004 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2003-2004 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 24229422
$76.55 MSRP: $130.34
You Save: $53.79 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch, Parking/Neutral Position & Back Up Lamp; Range Sensor; Transmission Safety Starting Switch; Speed Sensing; Back Up Lamp
- Replaced by: 24298931
Fits the following GMC Models:
- C1500 | 1996-1999 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1996-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1996-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Envoy | 2003 | SLE, SLT | 6 Cyl 4.2 L GAS
- Envoy XL | 2003 | SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Jimmy | 1997-2001 | Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Neutral Safety Switch Part Number: 24258550
$41.94 MSRP: $62.43
You Save: $20.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Transmission Control; Range Sensor; Switch, Throttle Control (Electric)
- Replaces: 24242938, 24246427
Fits the following GMC Models:
- Canyon | 2015-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
- Savana 2500 | 2021-2023 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- Savana 3500 | 2021-2023 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- Sierra 2500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 29541852
$96.96 MSRP: $166.52
You Save: $69.56 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Kit, Transmission Safety Starting Switch Or Speed Sensing; Switch Kit, Safety Starting Switch; Transmission Safety Start/Warning; Back Up Lamp
Fits the following GMC Models:
- Sierra 1500 | 2004-2005 | Base, Denali, Hybrid, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 2004 | Base, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2004-2005 | Base, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2004-2005 | Base, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2004-2005 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2004-2005 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2004-2005 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 24221125
$86.84 MSRP: $147.85
You Save: $61.01 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Parking/Neutral Position & Back Up Lamp; Back Up Light Switch; Range Sensor; Back-Up Switch; Transmission Safety Starting Switch; Speed Sensing; Back Up Lamp
Fits the following GMC Models:
- Canyon | 2004-2008 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
- Envoy | 2004-2009 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XL | 2004-2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Safari | 2005 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
- Savana 1500 | 2004-2010 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Savana 2500 | 2004-2010 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2004-2010 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 1500 | 2003-2008 | Base, Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 14094368
$14.91 MSRP: $24.54
You Save: $9.63 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch; Back Up Light Switch; Clutch Switch; Back-Up Switch; Transmission Safety Starting Switch; Engine Clutch Hydraulic Release; Cruise Control.
Fits the following GMC Models:
- C1500 | 1991-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1991-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1991-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Jimmy | 1992-1995 | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1991-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1991-1996 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Back-Up Switch Part Number: 89048415
$97.95 MSRP: $155.51
You Save: $57.56 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Parking/Neutral Position & Back Up Lamp; Back Up Light Switch; Switch, Transmission Safety Starting; Back Up Lamp
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Neutral Safety Switch Part Number: 29542692
$153.67 MSRP: $229.70
You Save: $76.03 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Detent, Transmission Throttle Valve; Automatic Transmission Position Switch; Switch, Transmission Mounted Gearshift (External)
Fits the following GMC Models:
- Sierra 1500 | 2006-2010 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2006 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2006-2010 | SL, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2006 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon | 2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Range Sensor Part Number: 24042167
$92.17 MSRP: $156.93
You Save: $64.76 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Automatic Transmission Manual Shift Shaft Position (Ims-Analog); Switch, Throttle Control (Electric); Switch, Transmission Control Cable; Switch, Transmission Control
- Replaces: 24286139, 24282899, 24258180
Fits the following GMC Models:
- Canyon | 2017-2020 | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Switch Part Number: 23190137
$26.69 MSRP: $43.97
You Save: $17.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Transmission Safety Start/Warning; Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Shift Brake Interlock
- Replaces: 26054721
Fits the following GMC Models:
- Sierra 1500 | 1999-2006 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
- Sierra 1500 HD | 2005, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2000-2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2000-2006 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2000-2006 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 19151835
$38.97 MSRP: $70.55
You Save: $31.58 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Back Up Lamp; Switch, Transmission Safety Starting or Speed Sensing; Safety Start/Warning Switch.
Fits the following GMC Models:
- Sierra 1500 | 2009-2010 | Denali, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
- Sierra 2500 HD | 2009-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2009-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Clutch Switch Part Number: 15101582
$27.92 MSRP: $46.00
You Save: $18.08 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Cruise Control Selector; Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following GMC Models:
- Canyon | 2004-2007 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Back-Up Switch Part Number: 19152824
Product Specifications
- Other Name: Switch, Back Up Lamp; Back Up Light Switch; Switch, Safety Starting Switch Or Speed Sensing
- Replaces: 88996556
Fits the following GMC Models:
- Sierra 2500 | 2003-2004 | Base, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2003-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2003-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2003-2006 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Back-Up Switch Part Number: 12479776
Product Specifications
- Other Name: Switch Assembly, Back Up Lamp; Back Up Light Switch; Switch, Back Up Lamp
Fits the following GMC Models:
- Sierra 1500 | 2001-2006 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2001-2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2001-2006 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2001-2006 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 15705308
Product Specifications
- Other Name: Switch, Parking/Neutral Position & Back Up Lamp; Back Up Light Switch; Back-Up Switch; Switch, Transmission Safety Start/Warning; Switch, Starting Or Temperature Switch; Switch, Back Up Lamp
- Replaces: 15679680
Fits the following GMC Models:
- C1500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- G1500 | 1992-1995 | Rally, Rally STX, Vandura | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- G2500 | 1992-1995 | Rally, Rally STX, Vandura | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- G3500 | 1992-1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Jimmy | 1992-1996 | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Clutch Switch Part Number: 15027967
$54.51 MSRP: $97.33
You Save: $42.82 (44%)
Product Specifications
- Other Name: Switch, Cruise Control Selector; Switch, Transmission Safety Starting or Speed Sensing; Hydraulic Clutch Main Cylinder.
Fits the following GMC Models:
- Jimmy | 2000-2001 | Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- Sierra 1500 | 1999-2006 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Neutral Safety Switch Part Number: 15569768
Product Specifications
- Other Name: Switch, Transmission Safety Start/Warning
Fits the following GMC Models:
- S15 | 1984-1988 | Base, EL, Gypsy, High Sierra, Sierra Classic | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
- S15 Jimmy | 1984-1988 | Base, Gypsy, High Sierra, Sierra Classic, Timberline | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Parking Brake Warning Switch Part Number: 477361
Product Specifications
- Other Name: Switch Assembly-Parking Brake Indicator; Switch, Parking Brake Indicator
Fits the following GMC Models:
- C1500 | 1991 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C2500 | 1991 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1991 | Sierra, Sierra SLE, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- Jimmy | 1991 | Base | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K1500 | 1991 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K2500 | 1991 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1991 | Sierra, Sierra SLE, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- R1500 Suburban | 1991 | Base | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- R2500 Suburban | 1991 | Base | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- R3500 | 1991 | Base, SLE | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Back-Up Switch Part Number: 24261926
$26.64 MSRP: $47.59
You Save: $20.95 (45%)
Product Specifications
- Other Name: Switch; Back Up Light Switch; Switch, Safety Starting Switch Or Speed Sensing
Fits the following GMC Models:
- Canyon | 2015-2019 | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS

GMC Neutral Safety Switch

Choose OEM Neutral Safety Switch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Neutral Safety Switch. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Neutral Safety Switch cuts off the engine ignition when the shifter is not firmly in park or neutral. GMC started with 1901 truck foundations and expanded to a series of pickups and SUVs that help get the job done, pull, and get to work without the spectacle. Powertrains make highway speeds unchallenged and strong boxed frames shake off the heavy loads. Silent cabins make long journeys seem short. GMC makes suspension sound like gravel pavements. MultiPro tailgate flips, props, or drops in such a manner grabbing cargo never wrecks your back. When traffic jams surround, eyes remain on corners and trailers with the aid of surround vision and hitch guidance. Hard testing strains prototypes till they are weakened, and then components become harder. Ability remains in the limelight since customers do not desire promises but work. The Neutral Safety Switch is attached to either the transmission or steering column and features an internal plunger that locks out the starter circuit until its internal plunger detects park or neutral in a sealed electrical circuit that provides position data to the engine control module and starter relay to provide instant go or firm no-go. It prevents impromptu thrust to the drivetrains, garage walls, and shins by preventing cranks in gear. A Neutral Safety Switch will put on during decades of shifts and change in a few minutes will restore that simple yes or no security check every crucial twist of the key requires. No fancy calibration, clean continuity, or nothing at all makes the rule clear.

GMC Neutral Safety Switch Parts and Q&A

Neutral Safety Switch
29542692
Q: How to replace the Neutral Safety Switch on the 4L60-E/4L65-E/4L70-E automatic transmission on GMC Sierra 1500?
A:
The first step to change the park/neutral position switch for 4l60-e/4l65-e/4l70-e automatic transmissions requires users to engage the parking brake and set the transmission to neutral. Drivers with 4-wheel drive vehicles must remove the front propeller shaft before proceeding. Begin by raising and properly supporting the vehicle then remove the park/neutral position (PNP) switch electrical connector. Start by removing the manual shaft lever nut before taking out the transmission control lever from the manual shaft. Next, remove the pnp switch bolts and take off the pnp switch from the manual shaft; use a file to smooth the edge of the manual shaft because if the pnp switch does not easily slide off. Put the pnp switch in position on the manual shaft's flat sections and push it until the mounting bracket touches the transmission bosses. A new pnp switch includes a built-in positive assurance bracket so the park neutral switch aligner (J 41364-A) becomes redundant during installation. Attach the park neutral switch aligner (J 41364-A) to the pnp switch after installing its bolts hand-tight. The adapter should sit on the pnp switch while the two slots on the tool should match the lower tabs on it. Secure the two bolts with torque at 25 n.m (18 lb ft) while rotating the tool until its upper locator pin matches the slot on the switch top. Take out both the park neutral switch aligner j 41364-a and the positive assurance bracket if present. Crank the transmission control lever onto the manual shaft by installing its nut to a torque of 25 n.m (18 lb ft). Next, reconnect the pnp switch electrical connector. If the vehicle has 4wd, reinstall the front propeller shaft, lower the vehicle, and check the switch for proper operation, ensuring the engine starts only in the park (P) or neutral (N) positions; the switch warrants replacement in cases where it fails to function properly.
Neutral Safety Switch
24221125
Q: How to replace the Neutral Safety Switch on the 4L60-E/4L65-E transmission on GMC Yukon?
A:
Start by applying the park brake followed by shifting the transmission into neutral before replacing the park/neutral position switch on the 4l60-e/4l65-e transmission. Vehicles equipped with 4-wheel drive require the removal of the front propeller shaft before proceeding. Begin by safely elevating the vehicle before disconnecting the electrical connector for the park/neutral position (PNP) switch. Start by removing the manual shaft lever nut followed by the transmission control lever from the manual shaft. Next, remove the pnp switch bolts and take the pnp switch off the manual shaft; file the manual shaft's outer edge with a file to smooth any surface burrs when the manual shaft resists sliding off easily. Installation begins with aligning the pnp switch to the manual shaft flats before sliding it onto the shaft until the switch mounting bracket engages with the transmission mounting bosses. A brand-new pnp switch installs with a positive assurance bracket so the park neutral switch aligner becomes unnecessary. Centrally torque the pnp switch bolts first, then utilize the park neutral switch aligner (J 41364-A) to align switch slots with tool lower tabs. Follow by rotating the tool to allow its upper locating pin to face towards the switch top. Tighten the bolts to 25 nm (18 ft. Lbs.). First remove the park neutral switch aligner (J 41364-A) and eliminate the positive assurance bracket (if present) from the system. Reinstall the transmission control lever onto the manual shaft with the nut, tightening it to 25 nm (18 ft. Lbs.)reconnect the pnp switch electrical connector after reattaching the pnp switch. If the vehicle has 4wd, reinstall the front propeller shaft, lower the vehicle, and check the switch for proper operation, ensuring the engine starts only in the park (P) or neutral (N) positions; replace the switch when it fails to operate correctly.