Tahoe | 2007-2014 | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Equinox | 2010-2017 | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Equinox | 2005-2009 | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
| Page 1 of 97 |Next >
1-20 of 1921 Results
Chevrolet Weather Strip
Choose OEM Weather Strip, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Weather Strip. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to Replace a Front Door Weather Strip on Chevrolet Colorado?
A:
Beginning the replacement of the front door opening Weather Strip requires you to open the front door and rear door simultaneously. The front door opening Weather Strip should be removed from its pinchweld position on the opening and taken out of the vehicle. When installing the front door Weather Strip begin by placing the dot on the front door against the notch which exists at the upper rear corner of the pinchweld flange. Press the front door opening Weather Strip starting from this notch against the pinchweld flange until full seating is achieved. To validate spring clearance you must pull the front door opening Weather Strip cord until the lip properly overlaps interior trim areas and the headliner before shutting the door.
Q: How to replace the sunroof Weather Strip (ZRX/EXTREME w/ CF5) on Chevrolet S10?
A:
Replacement procedures for a sunroof seal/molding (ZRX/EXTREME w/ CF5) begin with sunroof window removal. Pull upward to break free the seal at the upper frame's front and finish separating it from the rear mainframe. The mainframe channel must receive thorough cleaning from silicone adhesive and debris by employing either a nylon glazing stick or a soft wire brush. Installation requires black non-corrosive silicone adhesive applied to the entire outside border of the new seal. To install the new window seal simply press it into the mainframe channel while using a roller-type installation tool. Set the sunroof window back into place and completely shut it before letting the silicone dry over 4-6 hours. Check the window's appearance after drying during both its open and closed states. You must open the sunroof for the last step to examine the seal and resolve any excessive height issues.