Other Name: Weatherstrip, Rear Side Door Window Glass Running (Outer & Inner); Weatherstrip; Weatherstrip, Side Door Window Glass
Position: Rear Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
Chevrolet Avalanche 1500 Weather Strip
Want to cut long-term maintenance and repair costs? Choose OEM Weather Strip. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Avalanche 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Avalanche 1500 Weather Strip includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Chevrolet Avalanche 1500 Weather Strip Parts and Q&A
Q: How to replace the rear door Weather Strip on Chevrolet Avalanche 1500?
A:
To install the rear door Weather Strip, 1. Open the door and remove the Weather Strip from the mounting surface using the door trim pad clip remover (J 38778). To be considered, it is important to install the new Weather Strip in a clean place not having dust or dirt particles which might interfere with the adhesive surfaces of the Weather Strip as foreign material may lead to improper adhesion. Start by removing the backing paper and attaching the retainers then close the door.
Q: How to replace the front door window Weather Strip on Chevrolet Avalanche 1500?
A:
The process of replacing the front door window weather strip requires removal of the door trim panel subsequently followed by removal of the water deflector and window. First secure the door by removing its screws then slowly pull the weather strip out from all three locations: the front of the glass run channel and the top and back of the window frame flange before complete removal. Install the new product at the front of the glass run channel followed by the top of the window frame flange and the rear of the glass run channel before tightening bolts to 6 N.m (53 lb in) according to Service Precautions Fastener Notice. Complete the procedure by reinstalling the window followed by the water deflector and door trim panel then check the window operation.