Other Name: Switch Assembly-Turn Signal & Headlamp Dimmer; Multi Purpose Switch; Combination Switch; Signal Switch; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
Replaces: 10362761, 15258881, 15841544, 15915857
Fits the following Chevrolet Models:
Cobalt | 2005-2010 | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
Equinox | 2007-2009 | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
Other Name: Switch Assembly-Turn Signal *Jet Black; Multifunction Switch; Signal Switch; Front Wiper Switch; Switch, Turn Signal Lamp
Replaces: 39149295, 13396590, 39043501
Fits the following Chevrolet Models:
Bolt EV | 2017-2021 | LT, Premier | BATTERY EV (EV/BEV)
Cruze | 2016-2019 | Diesel, L, LS, LT, Premier | 4 Cyl 1.4 L GAS, 4 Cyl 1.6 L DIESEL
Volt | 2016-2019 | LT, Premier | 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
| Page 1 of 9 |Next >
1-20 of 170 Results
Chevrolet Turn Signal Switch
Choose OEM Turn Signal Switch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Turn Signal Switch. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the Multifunction Turn Signal Switch Housing on Chevrolet Colorado?
A:
You must start by taking out the turn signal multifunction switch to replace the switch housing. Disconnect the multifunction turn signal switch bolts before you can take out its housing part. To start assembly position the multifunction switch housing correctly and follow safety instructions when using fasteners for vehicle protection. Insert the bolts into the housing and tighten them until they reach a torque of 22 lb in (2.5 Nm). Afterwards, put back the turn signal multifunction switch.
Q: How to replace the Turn Signal Switch on Chevrolet Tahoe?
A:
The first step for replacing a turn signal switch requires turning off the SIR system. Before working on the steering column wire harness assembly you must detach its abrasion sleeve's connector yet keep track of this part for reinstallation. Disconnect the wire harness assembly (Wire Harness Assembly) from the wire harness strap (Wire Harness Strap) before disassembling the turn signal and multifunction switch assembly connector from the SIR system coil connector. Pull out the Turn Signal and Multifunction Switch Assembly connectors from their position within the Bulkhead Connector. Extract the turn signal and multifunction switch assembly (Turn Signal and Multifunction Switch Assembly) from the steering column tilt head assembly by removing two pan head tapping screws (Pan Head Tapping Screw). When installing the turn signal and multifunction switch assembly (Turn Signal and Multifunction Switch Assembly) position it on the steering column tilt head assembly so the electrical contact touches the turn signal cancel cam assembly. Secure the assembly with the two pan head tapping screws (Pan Head Tapping Screw), tightening the top screw to 3 Nm (27 inch lbs.) Secure the two pan head tapping screws using 7 Nm torque (62 inch lbs.) for the side screw and 3 Nm (27 inch lbs.) for the top screw. Insert both connectors (Turn Signal and Multifunction Switch Assembly) into the Bulkhead Connector before connecting the turn signal and multifunction switch assembly connector to the SIR coil connector. Reposition the steering column wire harness assembly within the abrasion sleeve by aligning wires from the ignition lock cylinder case in their proper position before reinstalling the sleeve. Reinstall the wire harness assembly (Wire Harness Assembly) into the wire harness strap (Wire Harness Strap) before putting back upper and lower trim covers and activating the SIR system.