The initial step to replace the Power Door Lock Switch demands users to remove the 2 screws which fasten the switch plate assembly to the door trim panel. First raise the front side of the switch plate to unclip it before removing the switch plate from the door trim panel window. Remove the Power Door Lock Switch plate assembly from your vehicle by first disconnecting electrical connectors (3, 4) from switches (2, 5). The replacement process demands removing the switches from the plate while retaining them for transfer if the switch plate needs replacement only. Install the switches (2, 5) to the switch plate then connect electrical connectors (3, 4) to switches (2, 5). Use the two screws to install the switch plate assembly onto the door trim panel while tightening the front door switch plate screws to 2 N.m (18 lb in).