Other Name: Receiver Assembly-Remote Control Door Lock; Receiver, Door Lock Remote Control Inside; Receiver, Door Electric And Vacuum Locks; Module, Tire Pressure
Replaces: 25856316, 25938218
Fits the following Cadillac Models:
CTS | 2009-2014 | Base, Luxury, Performance, Premium, V | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
SRX | 2007-2009 | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
| Page 1 of 2 |Next >
1-20 of 40 Results
Cadillac TPMS Sensor
Choose OEM TPMS Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac TPMS Sensor. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the TPMS Sensor on Cadillac CTS?
A:
Vehicle elevation on a proper support begins the process for Tire Pressure Indicator Sensor replacement. The tire/wheel assembly needs removal. The sensor's cap and valve must go on a clean area following removal due to their aluminum and nickel-plated construction which protects against corrosion. To separate the tire bead from the wheel use the bead breaking fixture at a 90-degree angle to the valve stem and insert a tire iron or pry bar just ahead of the sensor body when pulling over the bead onto the mounting/dismounting head. Apply the tire machine to turn the tire/wheel assembly clockwise during bead transfer to the wheel rim's exterior before performing the same procedure for the inner bead. Pull the tire away from the wheel while you clean all inside surfaces free of leftover tire sealant. Separate your efforts by removing the tire pressure sensor nut followed by removing the sensor itself. During installation wipe away dirt from the grommet sealing spot before putting the sensor wheel-hole first and double-check the part numbers match. Position the sensor body parallel to wheel surface inside before tightening the sensor nut to 7 Nm (62 lb in). When installing the tire position the mounting/dismounting head facing 180 degrees away from the valve stem while keeping the bead transition area at a 45 degree counterclockwise angle relative to the valve stem. Rotate the tire/wheel assembly clockwise as you move each tire bead inside the wheel rim and repeat for the outer bead. When putting the tire on the wheel use caution because the service replacement tire pressure sensor arrives in the OFF state which requires at least 10 seconds at more than 32 km/h (20 mph) wheel speed to turn it ON. Place the tire/wheel assembly onto the vehicle before lowering it then learn the tire pressure sensors.
Q: How to replace the TPMS Sensor (Clamp In Style) on Cadillac Escalade?
A:
Start by having a suitable vehicle support lift your car before you take off the tire and wheel assembly to replace the Clamp In Style Tire Pressure Sensor. Place the sensor components on a clean area before tire removal while ensuring the aluminum cap matches nickel-plated valve material to stop corrosion. Position your bead breaking fixture 90 degrees from the valve stem and insert your tire iron or pry bar slightly clockwise of the sensor body before prying the tire bead over the mounting/dismounting head. The tire machine allows you to perform clockwise rotations on the tire/wheel assembly to move tire beads outside of the wheel rim before repeating this procedure for the inner bead. Use proper cleaning solutions to eliminate all remaining tire sealant inside the tire's surface and on the wheel surface. You need to disconnect the tire pressure sensor nut followed by the sensor removal. Clean the grommet sealing surface first then position the sensor wheel hole entry with the air passage toward the wheel's outside and tighten the sensor nut to 7 N.m (62 lb in) while the sensor body remains parallel to the wheel internal surface. Position the mounting/dismounting head 180 degrees from the valve stem and align the bead transition area 45 degrees counterclockwise of the valve stem before rotating the tire/wheel assembly clockwise to transfer the tire bead inside the wheel rim followed by a similar process for the outer bead. The service replacement tire pressure sensor arrives in an OFF state requiring at least 10 seconds of 32 km/h (20 mph) tire/wheel assembly rotation to deactivate its internal roll switch before conducting remote control door lock receiver (RCDLR) memory learning. Finish the installation by mounting the tire/wheel assembly onto the vehicle then drop it to the ground before triggering the required learning sequence for tire pressure sensors.