How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the left side on Cadillac XLR?

You must remove the left camshafts and Starter motor as well as the valve stem oil seal and valve spring on the left side. Fix the Flywheel with the en 46326 holder. Before replacing the Spark Plug clean the area surrounding its chamber to avoid introducing dirt inside it and take out the current Spark Plug from that cylinder. After inserting the j 39313 into the Spark Plug hole, set the j 44211 base plate on top with a constant air supply maintaining valve closure. Set the swivel nut to expose the valve locks of the j 44211. Use a magnet after tightening to pull and remove the locks. Turn the swivel nut until you can move the arm backward to take out the valve spring retainer and valve spring. To extract the outdated valve stem seal staff the j 38820 tool. Apply clean engine oil to both ends of valve stem and seal before installing them into the base with the j 38820 device by rotating. After putting back the valve parts slide the j 44211 swivel nut tight until you can reach the valve locks through its socket. Position the valve locks with a magnetic device. Uninstall the j 44211 elements while reducing air pressure and taking out the j 39313 piece from the Spark Plug port. Put back the j 44211 base plate followed by the Spark Plug left camshafts and the Starter motor.

How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the right side on Cadillac SRX?

Replacement of the right side valve stem oil seal along with the valve spring begins with Starter motor removal followed by rocking arm removal. Without the en-46106 (Flywheel Holding Tool) in place the Crankshaft can rotate thereby forcing engineers to take down and rebuild the entire camshaft timing structure. Begin by installing the en-46106 flywheel holding tool to lock the Crankshaft before removing the applicable cylinder's Spark Plug and placing the en-39313 (Spark Plug Port Adapter) to a compressed air supply. The en-46110 (On-Vehicle Valve Spring Compressor) needs to be positioned above the target cylinder before tightening its nut. Use this procedure to remove valve keepers before loosening the compressor nut to extract the valve spring retainer and spring. Install a valve stem seal either by using the en-46116 (Valve Stem Seal Remover/Installer) device or by following its instructions. The installation starts with the en-46116 tool for installing new valve stem seals and continues with valve spring and retainer installation. Secure the en-46110 compressor above the valve spring with its nut tightened before reinstalling the valve spring keepers while removing the compressor. Remove the en-39313 from its air connection before uninstalling it and reattaching the spark plugs and rocker arms. To complete the repair process install the Starter motor while removing the en-46106.

OEM Cadillac Rocker Shaft Spring Kit

Rocker Shaft Spring Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Rocker Shaft Spring Kits found

View related parts
Cadillac Valve Springs Part Number: 3911068
$9.05 MSRP: $14.18
You Save: $5.13 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Valve (W/Dampener); Valve Spring; Spring, Engine Valve
- Replaced by: 94666580
Fits the following Cadillac Models:
- Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Fleetwood | 1993 | Base, Brougham | 8 Cyl 5.7 L GAS
View related parts
Cadillac Valve Springs Part Number: 12592506
$4.87 MSRP: $7.74
You Save: $2.87 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Engine Valve; Valve Spring
Fits the following Cadillac Models:
- CTS | 2010-2014 | Base, Luxury, Performance, Premium, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- SRX | 2010-2012 | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
- STS | 2011 | Base | 6 Cyl 3.6 L GAS
View More
View related parts
Cadillac Alternator Bolt Part Number: 11588728
$4.48 MSRP: $7.02
You Save: $2.54 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Chassis/Engine Wiring Harness; Belt Tensioner Bolt; Tensioner Bolt; Compressor Bolt; Oil Cooler Bolt; Bracket Bolt
- Replaces: 11519171
Fits the following Cadillac Models:
- ATS | 2016-2019 | V | 6 Cyl 3.6 L GAS
- CT4 | 2020-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.6 L GAS
- CT5 | 2020-2024 | Premium Luxury, V | 6 Cyl 3.0 L GAS
- CTS | 2010-2019 | Base, Luxury, Performance, Premium, Vsport, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- XT5 | 2017-2023 | Base, Luxury, Platinum, Premium Luxury, Sport | 6 Cyl 3.6 L GAS
- XT6 | 2020-2024 | Premium Luxury, Sport | 6 Cyl 3.6 L GAS
View More
View related parts
Cadillac Valve Springs Part Number: 55577562
$5.39 MSRP: $8.44
You Save: $3.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Engine Valve; Valve Spring
Fits the following Cadillac Models:
- ELR | 2014-2016 | Base | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Cadillac Valve Springs Part Number: 12647873
$11.46 MSRP: $17.97
You Save: $6.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Engine Valve; Valve Spring
Fits the following Cadillac Models:
- ATS | 2016-2019 | Luxury, Performance, Premium, Premium Luxury, Premium Performance, V | 6 Cyl 3.6 L GAS
- CT5 | 2020-2022 | Premium Luxury, V | 6 Cyl 3.0 L GAS
- CT6 | 2016-2020 | Base, Luxury, Platinum, Premium Luxury, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
- CTS | 2014-2019 | Luxury, Performance, Premium, Premium Luxury | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- XT5 | 2017-2023 | Base, Luxury, Platinum, Premium Luxury, Sport | 6 Cyl 3.6 L GAS
- XT6 | 2020-2023 | Premium Luxury, Sport | 6 Cyl 3.6 L GAS
View More
View related parts
Cadillac Valve Springs Part Number: 12565199
$1.68 MSRP: $2.78
You Save: $1.10 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Valve; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- DTS | 2006-2011 | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
- DeVille | 2000-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
- Eldorado | 2000-2002 | ESC, ETC | 8 Cyl 4.6 L GAS
- SRX | 2004-2009 | Base | 8 Cyl 4.6 L GAS
- STS | 2005-2010 | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
- Seville | 2000-2004 | SLS, STS | 8 Cyl 4.6 L GAS
- XLR | 2004-2009 | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View More
View related parts
Cadillac Valve Springs Part Number: 10212811
$12.85 MSRP: $20.41
You Save: $7.56 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Valve; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
- Fleetwood | 1994-1996 | Base, Brougham | 8 Cyl 5.7 L GAS
View related parts
Cadillac Valve Springs Part Number: 14030029
Product Specifications
- Other Name: Spring & Damper; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- Cimarron | 1985-1986 | Base, d'Oro | 6 Cyl 2.8 L GAS
View related parts
Cadillac Valve Springs Part Number: 12555564
Product Specifications
- Other Name: Spring, Valve; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- Allante | 1993 | Base, Indianapolis 500 Pace Car, Value Leader | 8 Cyl 4.6 L GAS
- DeVille | 1994-1999 | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS
- Eldorado | 1993-1999 | Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS
- Seville | 1993-1999 | SLS, STS | 8 Cyl 4.6 L GAS
View More
View related parts
Cadillac Valve Springs Part Number: 90448050
Product Specifications
- Other Name: Spring, Valve; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- CTS | 2003-2004 | Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
- Catera | 1997-2001 | Base, Sport | 6 Cyl 3.0 L GAS
View related parts
Cadillac Valve Springs Part Number: 3542456
Product Specifications
- Other Name: Spring-Valve; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- DeVille | 1994-1995 | Base | 8 Cyl 4.9 L GAS
View related parts
Cadillac Valve Springs Part Number: 22510372
Product Specifications
- Other Name: Spring, Engine Valve; Valve Spring
Fits the following Cadillac Models:
- DeVille | 1984-1985 | Base, Cabriolet, d'Elegance | 6 Cyl 4.3 L DIESEL, 8 Cyl 5.7 L DIESEL
- Eldorado | 1984-1985 | Base, Cabriolet, Touring | 8 Cyl 5.7 L DIESEL
- Fleetwood | 1984-1985 | 75, 75 Formal, Base, Brougham, Brougham d'Elegance, d'Elegance | 6 Cyl 4.3 L DIESEL, 8 Cyl 5.7 L DIESEL
- Seville | 1984-1985 | Base, Elegante | 8 Cyl 5.7 L DIESEL
View More
View related parts
Cadillac Valve Springs Part Number: 1649686
Product Specifications
- Other Name: Spring; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- 60 Special | 1993 | Base | 8 Cyl 4.9 L GAS
- Allante | 1987-1988 | Base | 8 Cyl 4.1 L GAS
- DeVille | 1990-1993 | Base, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Eldorado | 1990-1993 | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Fleetwood | 1990-1992 | 60 Special, Base, d'Elegance | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Seville | 1990-1993 | Base, STS | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View More
View related parts
Cadillac Valve Springs Part Number: 1637569
Product Specifications
- Other Name: Spring Assembly; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- DeVille | 1984-1986 | Base, Cabriolet, d'Elegance, Touring | 8 Cyl 4.1 L GAS
- Eldorado | 1985-1986 | Base, Biarritz, Cabriolet, Touring | 8 Cyl 4.1 L GAS
- Fleetwood | 1984-1986 | 75, 75 Formal, Base, Brougham, Brougham d'Elegance, d'Elegance | 8 Cyl 4.1 L GAS
- Seville | 1984-1985 | Base, Elegante | 8 Cyl 4.1 L GAS
View More
View related parts
Cadillac Valve Springs Part Number: 1465408
Product Specifications
- Other Name: Spring; Valve Spring; Spring, Engine Valve
Fits the following Cadillac Models:
- Fleetwood | 1984 | Formal | 8 Cyl 6.0 L GAS
View related parts
Cadillac Valve Springs Part Number: 14085486
Product Specifications
- Other Name: Spring, Engine Valve; Valve Spring
Fits the following Cadillac Models:
- Cimarron | 1987-1988 | Base | 6 Cyl 2.8 L GAS

Cadillac Rocker Shaft Spring Kit

Choose OEM Rocker Shaft Spring Kit, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Rocker Shaft Spring Kit. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Rocker Shaft Spring Kit Parts and Q&A

Valve Springs
12565199
Q: How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the left side on Cadillac XLR?
A:
You must remove the left camshafts and Starter motor as well as the valve stem oil seal and valve spring on the left side. Fix the Flywheel with the en 46326 holder. Before replacing the Spark Plug clean the area surrounding its chamber to avoid introducing dirt inside it and take out the current Spark Plug from that cylinder. After inserting the j 39313 into the Spark Plug hole, set the j 44211 base plate on top with a constant air supply maintaining valve closure. Set the swivel nut to expose the valve locks of the j 44211. Use a magnet after tightening to pull and remove the locks. Turn the swivel nut until you can move the arm backward to take out the valve spring retainer and valve spring. To extract the outdated valve stem seal staff the j 38820 tool. Apply clean engine oil to both ends of valve stem and seal before installing them into the base with the j 38820 device by rotating. After putting back the valve parts slide the j 44211 swivel nut tight until you can reach the valve locks through its socket. Position the valve locks with a magnetic device. Uninstall the j 44211 elements while reducing air pressure and taking out the j 39313 piece from the Spark Plug port. Put back the j 44211 base plate followed by the Spark Plug left camshafts and the Starter motor.
Valve Springs
12592506
Q: How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the right side on Cadillac SRX?
A:
Replacement of the right side valve stem oil seal along with the valve spring begins with Starter motor removal followed by rocking arm removal. Without the en-46106 (Flywheel Holding Tool) in place the Crankshaft can rotate thereby forcing engineers to take down and rebuild the entire camshaft timing structure. Begin by installing the en-46106 flywheel holding tool to lock the Crankshaft before removing the applicable cylinder's Spark Plug and placing the en-39313 (Spark Plug Port Adapter) to a compressed air supply. The en-46110 (On-Vehicle Valve Spring Compressor) needs to be positioned above the target cylinder before tightening its nut. Use this procedure to remove valve keepers before loosening the compressor nut to extract the valve spring retainer and spring. Install a valve stem seal either by using the en-46116 (Valve Stem Seal Remover/Installer) device or by following its instructions. The installation starts with the en-46116 tool for installing new valve stem seals and continues with valve spring and retainer installation. Secure the en-46110 compressor above the valve spring with its nut tightened before reinstalling the valve spring keepers while removing the compressor. Remove the en-39313 from its air connection before uninstalling it and reattaching the spark plugs and rocker arms. To complete the repair process install the Starter motor while removing the en-46106.