How to properly service and replace the Ride Height Sensor on Buick LeSabre?

You must first raise the vehicle and take off the wheel when you decide to replace the Automatic Level Control Sensor. First disconnect the sensor connector from the height sensor while also detaching the sensor link from the ball stud and then loosen the mounting nut. Lower the Automatic Level Control Sensor by detaching the anti-rotation tab before pulling it down from the vehicle. First install the sensor by placing its mounting stud head into the key hole before pushing the sensor upward until the lower hole receives the anti-rotation tab. Follow the procedure by applying 9 Nm of torque (80 inch lbs) to the sensor mounting nut before attaching both the sensor link to the ball stud and height sensor connector. Place the wheel onto the vehicle before lowering it to completion.

How to replace the Ride Height Sensor on Buick Lucerne?

The process starts with vehicle elevation and wheel removal before breaking connections to both sensor and height components from the ball stud. First disconnect the height sensor connector along with the sensor link from the ball stud followed by screwing loose the sensor mounting nut. You should pull the anti-rotation tab then move the sensor toward the bottom to take it out of the vehicle. When installing the sensor mounting stud place its head into the key hole and push the sensor upward until the lower hole accepts the anti-rotation tab. Attach the height sensor connector after fitting the sensor link onto the ball stud and tighten the sensor mounting nut to 9 Nm (80 inch lbs.). End the installation process by putting the wheel in place while lowering down the vehicle.

OEM Buick Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Ride Height Sensors found

View related parts
Buick Height Sensor, Rear Part Number: 84171606
$36.15 MSRP: $67.87
You Save: $31.72 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Rear Suspension Auto Forward Lighting Leveling
- Position: Rear
- Replaced by: 84391114
Fits the following Buick Models:
- Regal Sportback | 2018 | Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Regal TourX | 2018 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Front Sensor Part Number: 23161431
$79.57 MSRP: $131.09
You Save: $51.52 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Sensor
- Position: Front
- Replaced by: 84368165
Fits the following Buick Models:
- Envision | 2016 | Premium | 4 Cyl 2.0 L GAS
View related parts
Buick Level Sensor, Rear Driver Side Part Number: 84391114
$36.15 MSRP: $67.87
You Save: $31.72 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Rear Suspension Auto Forward Lighting Leveling; Ride Height Sensor; Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Replaces: 84171606
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Level Sensor, Passenger Side Part Number: 84460152
$59.77 MSRP: $112.25
You Save: $52.48 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Passenger Side
Fits the following Buick Models:
- Envision | 2021-2023 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Height Sensor, Passenger Side Part Number: 84365777
$41.93 MSRP: $82.07
You Save: $40.14 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Front Sensor
- Position: Passenger Side
- Replaces: 23404137
Fits the following Buick Models:
- Enclave | 2018-2021 | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Level Sensor, Passenger Side Part Number: 84400588
$42.85 MSRP: $77.55
You Save: $34.70 (45%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Height Sensor
- Position: Passenger Side
- Replaces: 23377923, 84084760
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Control Sensor Part Number: 25980091
Product Specifications
- Other Name: Sensor Assembly-Auto Level Control; Front Sensor; Sensor, Air Suspension Leveling Or Level Control
Fits the following Buick Models:
- Lucerne | 2009-2011 | CX, CXL, CXL Special Edition, Super | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Level Sensor, Rear Driver Side Part Number: 25999463
Product Specifications
- Other Name: Sensor Assembly-Rear Air Spring Level; Ride Height Sensor; Rear Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Replaces: 15070506, 25999461, 15125534
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Level Sensor, Rear Passenger Side Part Number: 25999464
Product Specifications
- Other Name: Sensor Assembly-Rear Air Spring Level; Ride Height Sensor; Rear Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Passenger Side
- Replaces: 15070507, 25999462, 15125535
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Rear Sensor, Passenger Side Part Number: 25767364
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Passenger Side
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Rear Sensor, Driver Side Part Number: 15241855
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
Fits the following Buick Models:
- Lucerne | 2006-2008 | CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Level Sensor Part Number: 22100400
Product Specifications
- Other Name: Sensor & Arm Package; Height Sensor; Sensor, Air Suspension Leveling Or Level Control
Fits the following Buick Models:
- LeSabre | 1986-1989 | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Level Sensor Part Number: 22076333
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Height Sensor
Fits the following Buick Models:
- Commercial Chassis | 1991-1996 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Buick Height Sensor Part Number: 22076335
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Sensor
Fits the following Buick Models:
- Reatta | 1989-1991 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1989-1993 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Rear Sensor, Passenger Side Part Number: 15241856
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Passenger Side
Fits the following Buick Models:
- Lucerne | 2006-2008 | CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Height Sensor Part Number: 22149496
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Sensor
Fits the following Buick Models:
- Riviera | 1995 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Position Sensor Part Number: 22153656
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Height Sensor; Control Sensor; Sensor
Fits the following Buick Models:
- Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
- Riviera | 1996-1999 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Level Sensor Part Number: 22091486
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Height Sensor; Sensor
Fits the following Buick Models:
- Roadmaster | 1992-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.7 L GAS
View related parts
Buick Rear Sensor, Driver Side Part Number: 25767365
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Front Sensor, Passenger Side Part Number: 25767359
$195.39 MSRP: $350.49
You Save: $155.10 (45%)
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Front Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Front Passenger Side
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

| Page 1 of 2 |Next >

1-20 of 29 Results

Buick Ride Height Sensor

Choose OEM Ride Height Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Ride Height Sensor. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Ride Height Sensor maintains a constant height of the vehicle at the appropriate height to handle and remain safe. Chasing smooth since 1903, Buick combines soft interiors with quiet tuning that silences road noise, yet still provides a quick response at the wheel, and the brand is promising a future that sees the bold Wildcat EV concept rewrapping the classic lines in electric confidence, striking a century-old brand with an innovative edge, since these generations can still commute to school or farm and back in under two hours, still being able to talk to the passengers without screaming, all the while allowing them to close the doors and relax in a quiet, cozy space, whether they are a hundred miles to the company also brings together the old badges and new infotainment, comfortable seating to accommodate expansive music collections as well as backpacks, and styling that is always valued at a level that prevents the need to use a filter on selfies in the parking lot. Silent doors close with a heavy bang that is reassuring. Ride Height Sensor continuously measures the distance between the chassis and the pavement and then commands the suspension to lift up or down in a matter of milliseconds. It balances the heavy load or extra passengers by returning the factory ride level to put steering response and headlight aim in line. The system also protects the underbody areas against scrapes when taking sudden dips and also allows the traction control to operate with a consistent tire contact. The Ride Height Sensor works in rain, snow, or in the blazing heat to keep the height unchanged by temperature changes to provide predictable cornering day in, day out. Less wallows are detected on exit ramps because Buick adjusts the software to its balanced suspension geometry.

Buick Ride Height Sensor Parts and Q&A

Position Sensor, Driver Side
25728489
Q: How to properly service and replace the Ride Height Sensor on Buick LeSabre?
A:
You must first raise the vehicle and take off the wheel when you decide to replace the Automatic Level Control Sensor. First disconnect the sensor connector from the height sensor while also detaching the sensor link from the ball stud and then loosen the mounting nut. Lower the Automatic Level Control Sensor by detaching the anti-rotation tab before pulling it down from the vehicle. First install the sensor by placing its mounting stud head into the key hole before pushing the sensor upward until the lower hole receives the anti-rotation tab. Follow the procedure by applying 9 Nm of torque (80 inch lbs) to the sensor mounting nut before attaching both the sensor link to the ball stud and height sensor connector. Place the wheel onto the vehicle before lowering it to completion.
Front Sensor, Passenger Side
25767359
Q: How to replace the Ride Height Sensor on Buick Lucerne?
A:
The process starts with vehicle elevation and wheel removal before breaking connections to both sensor and height components from the ball stud. First disconnect the height sensor connector along with the sensor link from the ball stud followed by screwing loose the sensor mounting nut. You should pull the anti-rotation tab then move the sensor toward the bottom to take it out of the vehicle. When installing the sensor mounting stud place its head into the key hole and push the sensor upward until the lower hole accepts the anti-rotation tab. Attach the height sensor connector after fitting the sensor link onto the ball stud and tighten the sensor mounting nut to 9 Nm (80 inch lbs.). End the installation process by putting the wheel in place while lowering down the vehicle.