How to replace the rear axle wheel bearing and wheel seal on Buick Rainier?

The initial step to replace either the rear Axle Shaft seal or bearing starts with vehicle elevation and subsequent removal of tires and wheels. Begin by disconnecting the rear axle housing cover together with its gasket then proceed to remove the Axle Shaft. The tools required to extract the axle housing seal include rear axle seal and bearing remover (J 44685) and slide hammer (J 02619-1). The bearing installer (J 23690) combined with a universal driver handle (J 8092) should be used for bearing installation into the axle housing until the tool contacts the tube. Drive the Axle Shaft seal into the bore using the axle pinion oil seal installer (J 21128) until it reaches tube flush position. Place the Axle Shaft inside and follow with the gasketed rear axle housing cover before reinstalling the tire-wheel assembly and lubricate the axle before lowering the vehicle.

How to replace the axle shaft wheel seal on Buick Rendezvous?

Begin the replacement of the Axle Shaft oil seal by raising and supporting the vehicle and using the provided tools to remove right front tire assemblies then right front wheel drive shafts. The combination of j 2619-01 slide hammer (J 2619-01) and j 29794 Axle Shaft remover extension (J 29794) together with j 23129 universal seal remover (J 23129) will help remove the Axle Shaft oil seal from the Transfer Case. Automatic transaxle fluid should be used for lubrication when preparing new Axle Shaft oil seals for installation. The j 44752 bearing, race, and seal installer (J 44752) should be used to position the Axle Shaft oil seal within the Transfer Case while steering the Axle Shaft beyond the seal without letting splines touch the sealing surface or cause damage. Reassemble the unit by first placing right front wheel drive shaft followed by right front tire and wheel assembly before you lower the vehicle. To complete the procedure examine the transaxle fluid level and search for any fluid leakage.

OEM Buick Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Wheel Seals found

View related parts
Buick Axle Seals Part Number: 92230620
$14.53 MSRP: $28.02
You Save: $13.49 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seal
- Position: Rear
- Replaces: 22952051
Fits the following Buick Models:
- Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Oil Seal, Rear Part Number: 12471686
$12.28 MSRP: $22.22
You Save: $9.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Hub Seal; Bearing Seal; Axle Seals; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15522060, 26037309
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Output Shaft Seal, Front Part Number: 19258415
$11.09 MSRP: $17.37
You Save: $6.28 (37%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Wheel Drive Shaft; Wheel Seal; Axle Seal; Axle Seals; Seal Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Replaces: 19256467
Fits the following Buick Models:
- Envision | 2017-2020 | Base, Essence, Preferred | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Buick Axle Seals, Front Inner Part Number: 12479302
$13.70 MSRP: $22.56
You Save: $8.86 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Drive Axle Inner Shaft; Axle Seal; Inner Seal; Seal, Front Axle
- Position: Front Inner
- Replaces: 12479055, 12479196
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Output Shaft Seal, Front Part Number: 19258416
$8.24 MSRP: $12.91
You Save: $4.67 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Wheel Drive Shaft; Axle Seal; Seal Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Replaces: 19256468
Fits the following Buick Models:
- Envision | 2017-2020 | Base, Essence, Preferred | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Buick Axle Seal, Rear Part Number: 22845699
$14.43 MSRP: $27.10
You Save: $12.67 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seals; Seal; Seal, Rear Axle Shaft Bearing Or Hub
- Position: Rear
Fits the following Buick Models:
- LaCrosse | 2014-2016, 2012 | Base, Convenience, Leather, Premium, Sport Touring, Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Regal | 2014-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Oil Seal, Front Inner Part Number: 3965092
$6.27 MSRP: $11.35
You Save: $5.08 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Bearing Seal; Wheel Bearing Grease Seal; Hub Seal; Front Hub Seal; Inner Bearing Seal.
- Position: Front Inner
Fits the following Buick Models:
- Commercial Chassis | 1991-1996 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Electra | 1984-1989 | Estate Wagon, Limited, Park Avenue | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- LeSabre | 1984-1990 | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Regal | 1984-1987 | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Buick Bearing Seal, Rear Part Number: 554631
$12.60 MSRP: $20.71
You Save: $8.11 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal R; Wheel Seal; Axle Seal; Shaft Seals; Axle Seals; Wheel Bearing Seal; Axle Bearing Seal; Rear Axle Shaft Seal; Rear Wheel Bearing Oil Seal.
- Position: Rear
Fits the following Buick Models:
- Electra | 1989, 1984-1987 | Estate Wagon, Limited, Park Avenue | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- LeSabre | 1984-1990 | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Regal | 1984-1987 | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Buick Axle Seal, Rear Part Number: 20986535
$19.02 MSRP: $35.72
You Save: $16.70 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seals; Seal, Rear Axle Shaft Bearing Or Hub
- Position: Rear
- Replaces: 13280073
Fits the following Buick Models:
- LaCrosse | 2010-2012 | Base, Convenience, CX, CXL, CXS, Leather, Premium, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick Axle Seal, Green, Front Part Number: 24202835
$8.18 MSRP: $13.47
You Save: $5.29 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Wheel Drive Shaft; Wheel Seal; CV Boot; Seal Kit; Front Wheel Drive Axle Shaft; Front Axle Seal
- Position: Front
Fits the following Buick Models:
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Output Shaft Seal Part Number: 24288437
$19.85 MSRP: $32.70
You Save: $12.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Wheel Drive Shaft (Lhs-Case Side); Wheel Seal; Axle Seal; Axle Seals; Seal Kit, Front Wheel Drive Axle Shaft
- Position: Front
Fits the following Buick Models:
- Encore GX | 2020-2023 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
- Envision | 2016-2021 | Avenir, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS
View related parts
Buick Axle Seal, Rear Part Number: 84524381
$20.48 MSRP: $38.46
You Save: $17.98 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seals; Seal
- Position: Rear
Fits the following Buick Models:
- Enclave | 2020-2021 | Avenir, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
- Encore GX | 2020-2024 | Avenir, Essence, Preferred, Select, Sport Touring | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
- Envision | 2021-2023 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View More
View related parts
Buick Output Shaft Seal, Front Part Number: 55579965
$14.15 MSRP: $23.34
You Save: $9.19 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Axle; Automatic Transmission Transfer Shaft Seals; Transfer Case Output Shaft Seal; Axle Seal; Input Shaft Seal; Seal, Front Wheel Drive Axle Shaft
- Position: Front
Fits the following Buick Models:
- Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Dust Seal, Rear Part Number: 26049394
Product Specifications
- Other Name: Seal, Rear Axle; Power Steering Cylinder Boot Kit; Inner Tie Rod Cover; Tie Rod Seal; Outer Boot; Dust Shield; Grease Seal; Dust Cap; Assembly Seal; Lock Nut Seal.
- Position: Rear
- Replaces: 07828084, 7828084
Fits the following Buick Models:
- Century | 1984-1992 | Custom, Estate Wagon, Limited, Special, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- LeSabre | 1992-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1997-1999 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1992-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
- Riviera | 1995-1999 | Base | 6 Cyl 3.8 L GAS
- Skylark | 1992-1998, 1989 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View More
View related parts
Buick Oil Seal, Rear Part Number: 26047378
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Bearing Seal; Axle Shaft Seal; Wheel Bearing Oil Seal; Rear Axle Shaft Seal; Rear Wheel Bearing Seal.
- Position: Rear
Fits the following Buick Models:
- Commercial Chassis | 1991-1996 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Electra | 1984-1989 | Estate Wagon | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- LeSabre | 1985-1990 | Estate Wagon | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Buick Seal Part Number: 9186677
Product Specifications
- Other Name: Seal-Front Wheel Drive Shaft; Axle Seal; Seal, Front Wheel Drive Axle Shaft; Seal, Front Wheel Drive Axle
- Position: Front
Fits the following Buick Models:
- Regal | 2011-2012 | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Wheel Seal Part Number: 14084119
Product Specifications
- Other Name: Seal Kit; Wheel Hub Repair Kit; Axle Seal; Hub Seal; Bearing Seal; Grease Seal; Steering Knuckle Seal; Front Hub Seal; Seal Kit, Front Wheel Bearing.
- Position: Front Inner
Fits the following Buick Models:
- Century | 1984-1993 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Electra | 1985-1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- LeSabre | 1986-1991 | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Park Avenue | 1991-1993 | Base, Ultra | 6 Cyl 3.8 L GAS
- Reatta | 1988-1991 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1986-1993 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Bearing Seal Part Number: 14084118
Product Specifications
- Other Name: Seal; Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Hub Seals; Hub & Bearing Seal; Bearing Assembly Inner Seal; Seal, Front Wheel Bearing
Fits the following Buick Models:
- Skyhawk | 1984 | Custom, Limited, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Buick Wheel Seal, Front Part Number: 14084120
Product Specifications
- Other Name: Seal Kit, Front Wheel Bearing; Wheel Hub Repair Kit; Axle Seal; Hub Seal; Bearing & Grease Seal; Hub & Bearing Inner Seal; Wheel Bearing Inner Seal; Brake Flange Plate Seal.
- Position: Front
Fits the following Buick Models:
- Century | 1984-1989 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Seal Kit, Front Part Number: 14086700
Product Specifications
- Other Name: Seal Kit, Front Wheel Bearing; Wheel Seal; Caliper Seal Kit; Hub Seals; Hub & Bearing Seal; Bearing Assembly Inner Seal; Seal, Front Wheel Bearing
- Position: Front
Fits the following Buick Models:
- Skyhawk | 1985-1989 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Skylark | 1985-1996 | Base, Custom, Gran Sport, Limited, Luxury Edition, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 24 Results

Buick Wheel Seal

Choose OEM Wheel Seal, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Wheel Seal. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Wheel Seal retains grease and road soot out of the car to ensure a reliable smooth run. Buick started in 1903 and soon established a reputation of selling a car which rode quiet and soft. Drivers enjoyed the dyadic nature of smooth suspension and compact construction that brushed off the harsh pavement. Decade by decade, the company revised powertrains, cabin technology and sound deadening as it preserved that smooth ride. Its QuietTuning technique blocks out wind hiss making conversations effortless even when traveling at highways. The model range now incorporates old-fashioned sedans with crossovers which pack ample cabins but fit in parking spots. In 2022 Wildcat EV concept flaunted sculpted lines and assured an all electric future. The shoppers who are not fond of flashiness and prefer comfort continue to find the emblem fit their daily grind. Buick continues to present itself as heading towards practical luxury that regular budgets can afford. In between the bearing and the hub is Wheel Seal which creates a very tight seal against dust, rocks and splash water that would otherwise grind down the surface to a scrap. It captures lubricant such that components slide rather than sticking on heat. A dry run burns grease and then smashes metal over miles. Leaks or splits can be checked on a regular basis and therefore troubles omitted, hubs not melted. Long lasting Viton or nitrile lips are fitted at the exact diameters such that installation time is brief, fit snug. The options of Wheel Seal include front or rear installations in automobiles, trucks and SUVs without pushing inconveniencing shims. The quality of pick and bearing assembly continues to roll season after season.

Buick Wheel Seal Parts and Q&A

Oil Seal, Rear
12471686
Q: How to replace the rear axle wheel bearing and wheel seal on Buick Rainier?
A:
The initial step to replace either the rear Axle Shaft seal or bearing starts with vehicle elevation and subsequent removal of tires and wheels. Begin by disconnecting the rear axle housing cover together with its gasket then proceed to remove the Axle Shaft. The tools required to extract the axle housing seal include rear axle seal and bearing remover (J 44685) and slide hammer (J 02619-1). The bearing installer (J 23690) combined with a universal driver handle (J 8092) should be used for bearing installation into the axle housing until the tool contacts the tube. Drive the Axle Shaft seal into the bore using the axle pinion oil seal installer (J 21128) until it reaches tube flush position. Place the Axle Shaft inside and follow with the gasketed rear axle housing cover before reinstalling the tire-wheel assembly and lubricate the axle before lowering the vehicle.
Axle Seal, Green, Front
24202835
Q: How to replace the axle shaft wheel seal on Buick Rendezvous?
A:
Begin the replacement of the Axle Shaft oil seal by raising and supporting the vehicle and using the provided tools to remove right front tire assemblies then right front wheel drive shafts. The combination of j 2619-01 slide hammer (J 2619-01) and j 29794 Axle Shaft remover extension (J 29794) together with j 23129 universal seal remover (J 23129) will help remove the Axle Shaft oil seal from the Transfer Case. Automatic transaxle fluid should be used for lubrication when preparing new Axle Shaft oil seals for installation. The j 44752 bearing, race, and seal installer (J 44752) should be used to position the Axle Shaft oil seal within the Transfer Case while steering the Axle Shaft beyond the seal without letting splines touch the sealing surface or cause damage. Reassemble the unit by first placing right front wheel drive shaft followed by right front tire and wheel assembly before you lower the vehicle. To complete the procedure examine the transaxle fluid level and search for any fluid leakage.