Other Name: Handle-Outside; Exterior Door Handle; Handle, Door Outside Handle
Position: Driver Side
Fits the following Buick Models:
LeSabre | 1988-1990 | Custom, Limited | 6 Cyl 3.8 L GAS
| Page 1 of 16 |Next >
1-20 of 314 Results
Buick Door Handle
Choose OEM Door Handle, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Door Handle. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the front door exterior door handle on Buick LaCrosse?
A:
Replacement of the front door exterior handle starts with fully opening the window panel. Begin by removing the front door trim panel together with the front water deflector while being cautious to protect paint surfaces. After applying masking tape around the outside handle you should open the outside door handle rod to expose the lock clip on the door lock before gently removing the lock cylinder rod from the outside door handle. Detach the inside door panel bolt access tape after which you can remove the bolts (1, 2) securing the outside handle. The outside handle and the rod must be carefully taken off the door. During install place the outside handle together with the rod onto the door before tightening outside handle bolts (1, 2) to 10 N.m (89 lb in) torque. First install the outside handle bolt access tape onto the inner door panel before adding the lock cylinder rod to outside door handle. Slit the outer door handle rod into the clip before inserting it then secure the clip cover. Check the operation of the outside handle before removing the tape then reinstall both the water deflector and trim panel of the front door.
Q: How to replace the front door handle on Buick Regal?
A:
The first step to replace the front door exterior handle requires you to tape the front door outer panel near the handle for protection. First disconnect the front door outside handle rod together with its lock rod from the front Door Lock and remove the front door water deflector. Start by removing the outside handle bolts before rotating the handle aside and taking it out. The new outside handle should occupy its rightful position before being turned into the handle opening for installation. The vehicle requires front door outside handle bolts to be tightened up to 10 n.m (89 lb in). Reposition the front door outside handle lock rod and handle rod to the front Door Lock while reinstalling the water deflector followed by the removal of masking tape from the front door.