How to replace the rear brake calipers bracket on 2002 Chevrolet Suburban 1500?

You must begin by suspending the brake caliper with heavy mechanic's wire combined with the connection of the hydraulic flexible brake hose to avoid damage. Start by detaching the brake caliper from its bracket but leave the hose connected after which you can uninstall the brake pads and anti-rattle clips from the caliper bracket. You must remove the two Brake Caliper Bracket mounting bolts and the bracket components from the structure. Afterward clean any debris off the inside bracket ends while treating the mounting surface. Before applying the Brake Caliper Bracket mounting bolts position the bracket followed by removing all traces of original adhesive and cleaning bolt threads with denatured alcohol and applying threadlocker gm p/n 12345493 (Canadian P/N 10953488). The caliper bracket mounting bolts require a torque of 200 nm when installing jc5/jh5 system vehicles or 165 nm for jh6 systems. Brake systems using jc5/jh5 require 200 nm (148 ft. Lbs.) torque while jh6 systems need 165 nm (122 ft. Lbs.). For jh6 systems. Make sure to put the brake pads back in position while verifying they hit the rotor before fastening the bracket. For finishing the job replace the anti-rattle clips. Install the brake caliper while putting on the tire and wheel assembly then lower the vehicle until you slowly apply the Brake Pedal once to 2/3 its travel before letting it return to its original position. Apply each brake caliper with 200 nm torque utilizing a torque wrench before waiting 15 seconds for proper Brake Pad and caliper piston seating.

OEM 2002 Chevrolet Suburban 1500 Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Calipers found

View related parts
2002 Chevrolet Suburban 1500 Caliper Part Number: 19331021
$170.23 MSRP: $328.77
You Save: $158.54 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Replaces: 18040101, 25848000
- Item Weight: 11.90 Pounds
- Item Dimensions: 7.2 x 4.1 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331021
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper Part Number: 19331022
$171.88 MSRP: $331.97
You Save: $160.09 (49%)
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Replaces: 25848001, 18040100
- Item Weight: 11.80 Pounds
- Item Dimensions: 13.0 x 7.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper, Front Driver Side Part Number: 84394384
$109.82 MSRP: $213.14
You Save: $103.32 (49%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaced by: 87859910
- Item Weight: 15.50 Pounds
- Item Dimensions: 8.4 x 5.3 x 14.4 inches
- Condition: New
- SKU: 84394384
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper, Driver Side Part Number: 18040100
$171.88 MSRP: $331.97
You Save: $160.09 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Replaced by: 19331022
- Item Weight: 11.80 Pounds
- Item Dimensions: 12.8 x 7.2 x 4.0 inches
- Condition: New
- SKU: 18040100
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper, Passenger Side Part Number: 18043521
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.9 x 9.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18043521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper, Driver Side Part Number: 18043520
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.2 x 8.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18043520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper, Front Passenger Side Part Number: 84394392
$191.64 MSRP: $343.75
You Save: $152.11 (45%)
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 25846389, 18046220
- Item Weight: 15.70 Pounds
- Item Dimensions: 14.8 x 8.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84394392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Suburban 1500 Overhaul Kit, Rear Part Number: 18043518
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 4.2 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18043518
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Chevrolet Suburban 1500 Caliper, Front Driver Side Part Number: 84394391
$190.26 MSRP: $341.26
You Save: $151.00 (45%)
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 18046219, 25846388
- Item Weight: 15.90 Pounds
- Item Dimensions: 14.8 x 8.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84394391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2002 Chevrolet Suburban 1500 Brake Calipers

With a comprehensive array of OEM 2002 Chevrolet Suburban 1500 Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Suburban 1500 Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Suburban 1500 Brake Calipers Parts and Q&A

Q: How to replace the rear brake calipers bracket on 2002 Chevrolet Suburban 1500?
A: You must begin by suspending the brake caliper with heavy mechanic's wire combined with the connection of the hydraulic flexible brake hose to avoid damage. Start by detaching the brake caliper from its bracket but leave the hose connected after which you can uninstall the brake pads and anti-rattle clips from the caliper bracket. You must remove the two Brake Caliper Bracket mounting bolts and the bracket components from the structure. Afterward clean any debris off the inside bracket ends while treating the mounting surface. Before applying the Brake Caliper Bracket mounting bolts position the bracket followed by removing all traces of original adhesive and cleaning bolt threads with denatured alcohol and applying threadlocker gm p/n 12345493 (Canadian P/N 10953488). The caliper bracket mounting bolts require a torque of 200 nm when installing jc5/jh5 system vehicles or 165 nm for jh6 systems. Brake systems using jc5/jh5 require 200 nm (148 ft. Lbs.) torque while jh6 systems need 165 nm (122 ft. Lbs.). For jh6 systems. Make sure to put the brake pads back in position while verifying they hit the rotor before fastening the bracket. For finishing the job replace the anti-rattle clips. Install the brake caliper while putting on the tire and wheel assembly then lower the vehicle until you slowly apply the Brake Pedal once to 2/3 its travel before letting it return to its original position. Apply each brake caliper with 200 nm torque utilizing a torque wrench before waiting 15 seconds for proper Brake Pad and caliper piston seating.