Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19331022
Caliper

1999-2013 GM

Customer Questions & Expert Answers (24)
GM 19331022 Caliper
GM 19331022 Caliper
GM 19331022 Caliper
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Position
    Rear
  • Replaces
    25848001, 18040100
  • Manufacturer
    General Motors
Make sure this part fits
$171.88 MSRP: $331.97
You Save: $160.09 (49%)
Core Charge: $40.00
1
ADD TO CART

  • 19331022 Caliper is Ref No. 7 in the diagram below

    2003 GMC Savana 2500 Caliper Diagram for 19331022
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19331022

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2005 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2010 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2008 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2008 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19331022 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19331022 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the final step in the process for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, lower the vehicle, and fill the master cylinder reservoir to the proper level with clean brake fluid.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done before installing the brake caliper for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Repeat the cleaning and Threadlocker application for the 2 brake caliper mounting bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should you be careful about when removing the brake caliper for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Do not depress the brake pedal with the brake components removed to avoid damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the boot be installed over the piston for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    With the fold facing the brake caliper housing piston bore opening, seating the boot into the brake caliper bore groove.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the pistons be removed from the brake caliper for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Use a thin piece of wood to prevent damage while removing the pistons by directing compressed air into the brake hose inlet fitting port.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step to ensure safety when overhauling the front brake caliper for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Avoid placing fingers in front of the piston when applying compressed air to prevent serious injury.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the torque specification for the mounting bolts for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten them to 108 N.m (80 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be discarded before removing the brake hose for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    The 2 copper brake hose gaskets.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done before starting the repair for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Replace all components included in the repair kits for the brake caliper and lubricate the rubber parts with new Delco Supreme 11® or equivalent DOT-3 brake fluid.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you remove the brake caliper for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the brake caliper guide pin bolts and take off the brake caliper from the mounting bracket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the next step after removing the brake pads and clips for the 2002 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the two brake caliper bracket mounting bolts and the bracket itself, ensuring to clean any contaminants from the inside ends and the mounting surface.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be ensured regarding torque values for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Ensure that torque values specified are for dry, non-lubricated fasteners.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the final step in the process for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Install the brake caliper back onto the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What components need to be removed from the disc brake caliper mounting bracket for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the caliper pins and caliper pin boots from the disc brake caliper mounting bracket and inspect the disc brake hardware.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you compress the brake caliper pistons for the 2003 GMC Safari? Posted by Customer
    A:
    Use a large C-clamp over the top of the caliper housing against the back of the outboard pad, tightening it until the pistons are fully retracted.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done if installing new brake pads for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Clean the outside surface of the caliper boots with denatured alcohol and compress the pistons using a C-clamp with a protective barrier.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the next step after inspecting the fluid level for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the final step in the process for the 2005 GMC Yukon? Posted by Customer
    A:
    Install the brake caliper back onto the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step in the assembly process for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Install the brake caliper bleed screw and tighten it to 12 Nm (106 inch lbs.), followed by the bleed screw cap.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What are the final steps after securing the brake hose for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, and fill the master cylinder reservoir to the proper level with clean brake fluid if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you install the new caliper for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the new caliper onto the caliper bracket, securing it with the brake caliper bolts tightened to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first action to take when removing the brake caliper for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the brake caliper from the vehicle, taking care not to place fingers in front of the piston while applying compressed air to avoid injury.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the next step after removing the brake pads and clips for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the two brake caliper bracket mounting bolts and the brake caliper bracket itself.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper 19331022 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19331022 Caliper is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19331022 Caliper fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 19331022 maintains top performance when functioning as the Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper unit at its Rear. The component 19331022 is constructed from durable material and its dimensions span 13.0 x 7.1 x 4.1 inches while weighing 11.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19331022 has available replacement options 25848001, 18040100. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.