Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock; Latch, Rear Compartment Lid Release Or Ajar; Rear Storage Compartment; Rear Hatch Window; Lift Gate
Position: Rear
Replaces: 13501988
Fits the following GMC Models:
Sierra 1500 | 2017-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
| Page 1 of 5 |Next >
1-20 of 84 Results
GMC Trunk Latch
Choose OEM Trunk Latch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Trunk Latch. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the rear trunk latch on GMC Envoy?
A:
You must dismantle the liftgate window garnish and trim panel before substituting the liftgate latch. Unclip both components: the handle rod from the bellcrank and the bellcrank rod from the latch assembly. Unscrew the bellcrank screws attached to the latch/lock before removing the bellcrank piece. Remove the electrical connector from its position on the latch assembly plus disconnect the lock cylinder bellcrank rod from its mounting on the latch assembly. Take out the latch/lock assembly by unscrewing it from its mounting position on the liftgate. Position the latch/lock assembly onto the liftgate then install the screws while tightening them to 89 lb in according to the prescribed torque. Join the electrical and lock cylinder bellcrank rod to the latch/lock hardware unit. Place the bellcrank onto the latch/lock assembly structure then thread screws before tightening them to 0.7 newton meter (6 pound inch). Link the button to the handle setup through the bellcrank mechanism while also attaching the door handle rod to the bellcrank. Finish by putting back the trim panel and door window decoration.
Q: How to replace the lower trunk latch on GMC Safari?
A:
Begin your project to install a new lower trunk/liftgate latch by taking off the trim panel. A sharp-bladed tool lets you separate the weather strip deflector at its perforation if needed. Remove the lock assembly bolts after removing the control rod. Additionally, you can detach the reinforcement and bolts. To start the job remove the latch components from the door and take off the rod and retainer from the latch assembly. One side of the job starts by putting the control rod and retainer onto the latch. Position the retainer right to stop squeaks and vibrations during installation. Reassemble the door parts starting with the latch and retainer and fasten the bolts at 8 N.m (71 lb in). Replace the nylon retainers at every rod removal and installation. Simply place the control rod on its holder at the lock system before setting the water deflector in place and replacing the trim panel.