How to replace the inner wheel seal or bearing on the front drive axle on GMC Sierra 1500?

The replacement of front drive axle inner axle seal or bearing requires these key tools: certain tools are necessary for this job: j 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). J 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). Perform this service by first lifting your vehicle while also draining the Differential carrier assembly fluids. Start by taking the inner Axle Shaft and housing assembly from the Differential carrier case followed by separating Clutch Fork assembly components and the inner Axle Shaft from the inner Axle Shaft housing for right side seal or bearing replacement. Place the inner Axle Shaft housing into a vise while securing it with clamp pressure centered on the mounting flange. To extract an inner Axle Shaft seal or bearing, use either j 29369-1 or j 29369-2 behind the seal or bearing as necessary then attach j 2619-01 to the specified bushing and bearing remover. To replace the left side seal properly mark the correct wheel drive shaft and inner Axle Shaft alignment before disconnecting the wheel drive shaft followed by inner Axle Shaft removal with a hammer and brass drift. Secure the Differential carrier assembly in a vise before using the j 29369-1 or j 29369-2 with the j 2619-01 to remove inner Axle Shaft seal or bearing. Once installation begins start by using j 36609 and j 8092 to fit the right side bearing and then shift to j 45225 with j 8092 for installing the new Axle Shaft seal. When ready insert the inner Axle Shaft slowly with a careful impact then reinstall the Clutch Fork parts before attaching the assembly containing the inner Axle Shaft to the Differential carrier case. After proper inner Axle Shaft seating in the Differential case side gear, install the left side bearing and seal in the same sequence as the right side. Begin by installing the front Differential carrier assembly and add the correct fluid to complete the operation while lowering the vehicle.

How to replace the rear axle wheel bearing and wheel seal on GMC Sierra 1500?

A vehicle lifting procedure followed by support of the vehicle must be performed before tire and wheel assembly removal. Start by removing the rear axle housing cover before removing the Axle Shaft. Vses-equipped vehicles require j 44685 (remover) and j 2619-01 (hammer) to take off the rear Axle Shaft seal. Install the j 45857 (remover) and j 2619-01 (hammer) for the rear Axle Shaft seal replacement and bearing installation and wheel speed sensor reluctor ring replacement on vehicles with these features if equipped. The installation of the rear wheel speed sensor reluctor ring requires a complete seating of the Axle Shaft bearing within the rear Axle Shaft housing. The process starts with the j 23690 (installer) and j 8092 (driver) tool sequence to put in the Axle Shaft bearing before the j 21128 (installer) tool applies the Axle Shaft seal until it reaches tube level. Place back the rear Axle Shaft together with the rear axle housing cover. Proceed with tire and wheel set-up and distribute proper differential oil into the rear axle before finally removing the support while lowering the vehicle.

OEM GMC Sierra 1500 Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Wheel Seals found

View related parts
GMC Sierra 1500 Output Shaft Seal, Front Inner Part Number: 22761722
$22.43 MSRP: $38.51
You Save: $16.08 (42%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Axle Seal; Inner Seal; Outer Seal; Seal, Front Axle
- Position: Front Inner
- Replaces: 12471591, 12471682, 15801507, 12479012, 26059623
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2018 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Output Shaft Seal, Front Part Number: 19169124
$11.16 MSRP: $18.41
You Save: $7.25 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Shaft; Axle Seal; Seal, Front Axle
- Position: Front
- Replaces: 12471683, 12471592, 12479155, 26059624
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Oil Seal, Rear Part Number: 19180849
$16.73 MSRP: $31.42
You Save: $14.69 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Bearing Seal; Axle Seals; Wheel Bearing Oil Seal; Rear Axle Shaft Seal.
- Position: Rear
- Replaces: 15522062, 14047298, 26057167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2008 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Seal, Rear Part Number: 15823962
$29.22 MSRP: $54.88
You Save: $25.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Hub Seal; Axle Seals; Hub Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15007008, 26061024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2010 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Oil Seal, Rear Part Number: 12471686
$12.28 MSRP: $22.22
You Save: $9.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Hub Seal; Bearing Seal; Axle Seals; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15522060, 26037309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2019 GMC Sierra 1500 | AT4, Base, C3, Denali, Elevation, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Seal Part Number: 84428310
$10.65 MSRP: $19.28
You Save: $8.63 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Front Wheel Drive Shaft; Output Shaft Seal; Axle Seals; Seal, Rear Wheel Bearing Oil; Seal, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Seal, Rear Part Number: 26091741
$28.74 MSRP: $52.00
You Save: $23.26 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Sierra 1500 | Base, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Front Hub Seal Part Number: 23390381
$4.99 MSRP: $9.04
You Save: $4.05 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Bearing; Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Knuckle O-Ring; Seal, Brakes
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Housing O-Ring, Front Part Number: 23371177
$4.48 MSRP: $7.02
You Save: $2.54 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Axle Shaft; O-Ring; Seal, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Seal, Rear Part Number: 84446287
$13.11 MSRP: $24.63
You Save: $11.52 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Output Shaft Seal, Front Part Number: 84428321
$2.79 MSRP: $5.24
You Save: $2.45 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Axle Shaft; Axle Seal; Axle Housing O-Ring; O-Ring; Seal, Front Axle
- Position: Front
- Replaced by: 84983738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Seal, Front Inner Part Number: 23243766
$9.41 MSRP: $17.04
You Save: $7.63 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Output Shaft Seal; Seal, Front Axle
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Axle Seal, Rear Part Number: 23243725
$15.05 MSRP: $28.26
You Save: $13.21 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS

GMC Sierra 1500 Wheel Seal

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Sierra 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Sierra 1500 Wheel Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Sierra 1500 Wheel Seal Parts and Q&A

Output Shaft Seal, Front
19169124
Q: How to replace the inner wheel seal or bearing on the front drive axle on GMC Sierra 1500?
A:
The replacement of front drive axle inner axle seal or bearing requires these key tools: certain tools are necessary for this job: j 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). J 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). Perform this service by first lifting your vehicle while also draining the Differential carrier assembly fluids. Start by taking the inner Axle Shaft and housing assembly from the Differential carrier case followed by separating Clutch Fork assembly components and the inner Axle Shaft from the inner Axle Shaft housing for right side seal or bearing replacement. Place the inner Axle Shaft housing into a vise while securing it with clamp pressure centered on the mounting flange. To extract an inner Axle Shaft seal or bearing, use either j 29369-1 or j 29369-2 behind the seal or bearing as necessary then attach j 2619-01 to the specified bushing and bearing remover. To replace the left side seal properly mark the correct wheel drive shaft and inner Axle Shaft alignment before disconnecting the wheel drive shaft followed by inner Axle Shaft removal with a hammer and brass drift. Secure the Differential carrier assembly in a vise before using the j 29369-1 or j 29369-2 with the j 2619-01 to remove inner Axle Shaft seal or bearing. Once installation begins start by using j 36609 and j 8092 to fit the right side bearing and then shift to j 45225 with j 8092 for installing the new Axle Shaft seal. When ready insert the inner Axle Shaft slowly with a careful impact then reinstall the Clutch Fork parts before attaching the assembly containing the inner Axle Shaft to the Differential carrier case. After proper inner Axle Shaft seating in the Differential case side gear, install the left side bearing and seal in the same sequence as the right side. Begin by installing the front Differential carrier assembly and add the correct fluid to complete the operation while lowering the vehicle.
Axle Seal, Rear
15823962
Q: How to replace the rear axle wheel bearing and wheel seal on GMC Sierra 1500?
A:
A vehicle lifting procedure followed by support of the vehicle must be performed before tire and wheel assembly removal. Start by removing the rear axle housing cover before removing the Axle Shaft. Vses-equipped vehicles require j 44685 (remover) and j 2619-01 (hammer) to take off the rear Axle Shaft seal. Install the j 45857 (remover) and j 2619-01 (hammer) for the rear Axle Shaft seal replacement and bearing installation and wheel speed sensor reluctor ring replacement on vehicles with these features if equipped. The installation of the rear wheel speed sensor reluctor ring requires a complete seating of the Axle Shaft bearing within the rear Axle Shaft housing. The process starts with the j 23690 (installer) and j 8092 (driver) tool sequence to put in the Axle Shaft bearing before the j 21128 (installer) tool applies the Axle Shaft seal until it reaches tube level. Place back the rear Axle Shaft together with the rear axle housing cover. Proceed with tire and wheel set-up and distribute proper differential oil into the rear axle before finally removing the support while lowering the vehicle.