Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19169124
Output Shaft Seal, Front

1999-2019 GM

Customer Questions & Expert Answers (16)
GM 19169124 Output Shaft Seal, Front
GM 19169124 Output Shaft Seal, Front
GM 19169124 Output Shaft Seal, Front
GM 19169124 Output Shaft Seal, Front
  • Part Description
    Seal, Front Wheel Drive Shaft; Axle Seal
  • Position
    Front
  • Replaces
    12471683, 12471592, 12479155, 26059624
  • Manufacturer
    General Motors
Make sure this part fits
$11.16 MSRP: $18.41
You Save: $7.25 (40%)
1
ADD TO CART

  • 19169124 Output Shaft Seal, Front is Ref No. 4 in the diagram below

    2001 Chevy Silverado 1500 HD Output Shaft Seal, Front Diagram for 19169124
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19169124

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2010 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19169124 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19169124 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done after placing the new axle shaft seal for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Reinstall the axle shaft and the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be installed onto the expander assembly for the 2003 Cadillac Escalade? Posted by Customer
    A:
    The smallest expanding driver and the small driving washer, ensuring the separation lines are aligned.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the next step after installing the right side bearing for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Use the axle seal installer (J 45225) and the universal driver handle (J 8092) for the new axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be installed and tightened to 210 N.m (155 lb ft) for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The nut and washer retaining the wheel drive shaft assembly to the wheel hub and bearing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be removed after raising the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    The tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the first step to replace the inner rear axle shaft seal for the 2005 Chevrolet Suburban 1500? Posted by Customer
    A:
    Begin by raising the vehicle and removing the tire and wheel assembly, followed by the axle shafts and the differential assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the process for the left side for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the differential carrier assembly and secure it in a vise, then extract the inner axle shaft with a hammer and brass drift.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What tool is used to install the new axle shaft seal for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    The Differential Seal Installer - Inner (J 45177) is installed onto the J 33049.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be done after the axle shaft is removed for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Take out the axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the first step to replace the outer rear axle shaft seal for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    How is the new axle shaft seal installed for the 2004 GMC Yukon? Posted by Customer
    A:
    Insert the axle shaft seal into the axle tube, then install the Differential Seal Installer - Inner (J 45177) and the Camshaft Bearing Service Set (J 33049) over the axle shaft seal, driving the seal into the axle tube using both tools and a hammer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What tools are used for installation for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use the J 36609 and J 8092 to install the right side bearing, followed by the J 45225 and J 8092 for the new axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be removed from the steering knuckle bore for the 25/35 series for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    The O-ring seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be done with the O-ring seal for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Remove the O-ring seal from the steering knuckle bore, 25/35 series, and clean and inspect it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the first step for installation of the new seal for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Assemble the drive bar extension onto the drive bar of the J 33049 and insert it into the opposite side axle shaft tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Output Shaft Seal, Front 19169124 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19169124 Output Shaft Seal, Front is available in the market under the name GM Wheel Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19169124 Output Shaft Seal, Front fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 19169124 maintains top performance when functioning as the Seal, Front Wheel Drive Shaft; Axle Seal unit at its Front. The component 19169124 is constructed from durable material and its dimensions span 3.0 x 3.0 x 0.7 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seal, Front Axle. The part 19169124 has available replacement options 12471683, 12471592, 12479155, 26059624. Each vehicle needs 2 units of the part marked as SKU 19169124. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.