Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15823962
Axle Seal, Rear

1999-2023 GM

Customer Questions & Expert Answers (20)
GM 15823962 Axle Seal, Rear
GM 15823962 Axle Seal, Rear
GM 15823962 Axle Seal, Rear
GM 15823962 Axle Seal, Rear
  • Part Description
    Seal, Rear Axle Shaft; Wheel Seal
  • Position
    Rear
  • Replaces
    15007008, 26061024
  • Manufacturer
    General Motors
Make sure this part fits
$29.22 MSRP: $54.88
You Save: $25.66 (47%)
Ships in 1 Business Day
1
ADD TO CART

  • 15823962 Axle Seal, Rear is Ref No. 4 in the diagram below

    2012 Chevy Suburban 2500 Axle Seal, Rear Diagram for 15823962
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15823962

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2020 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2023 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1999-2010 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15823962 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 15823962 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you install the inner bearing cup for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Drive it in with the Wheel Bearing Race Installer - Inner (J24427) and the Universal Driver Handle (J8092).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the next step for installation after removing the old seal for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Assemble the drive bar extension onto the drive bar of the Camshaft Bearing Service Set (J 33049) and insert it into the opposite side axle shaft tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the final step before lowering the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Reattach the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be installed after the wheel speed sensor mounting bolt for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the wheel hub and bearing and splash shield to the vehicle for the 25/35 series.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the first step to replace the outer rear axle shaft seal for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Raise the vehicle using appropriate lifting equipment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the next step after reinstalling the rear axle housing cover for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Put the tire and wheel assembly back on and fill the rear axle with the appropriate differential oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is required if replacing the left side bearing for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the differential carrier assembly, the left inner shaft, and the inner shaft seal cover bolts and assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should you do at the end of the process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Fill the differential carrier assembly with the correct fluid and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the next step after installing the right side bearing for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Use the axle seal installer (J 45225) and the universal driver handle (J 8092) for the new axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What tools are used to remove the inner axle shaft seal or bearing for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Use the J 29369-1 or J 29369-2 behind the inner axle shaft seal or bearing, then attach the J 2619-01 to remove it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be done after removing the tire and wheel assembly for the 2005 Chevrolet Suburban 1500? Posted by Customer
    A:
    Take out the axle shaft and then remove the axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the next step after installing the axle shaft seal for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Carefully tap the inner axle shaft into place with a soft-faced mallet, then reassemble the inner axle shaft and clutch fork components into the housing, followed by the inner axle shaft and housing assembly into the differential carrier case.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the final step in the process for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Remove the support and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    How do you set the axle shaft seal flush with the axle tube for the 8.6 axle for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Use the J 21128 - Axle pinion Oil Seal Installer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the first step in the replacement process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Begin by raising the vehicle and draining the differential carrier assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the next step for installation after removing the old seal for the 2004 GMC Yukon? Posted by Customer
    A:
    Assemble the drive bar extension onto the drive bar of the Camshaft Bearing Service Set (J 33049) and insert it into the opposite side axle shaft tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What tools are used to remove the inner axle shaft seal or bearing for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use the appropriate J 29369-1 or J 29369-2 behind the inner axle shaft seal or bearing, then attach the J 2619-01 to remove it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the final step after replacing the left side bearing and seal for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Fill the differential carrier assembly with the correct fluid and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    How should the axle shaft seal be installed for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Ensure the seal is driven into the bore until it is flush with the tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Seal, Rear 15823962 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15823962 Axle Seal, Rear is available in the market under the name GM Wheel Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15823962 Axle Seal, Rear fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 15823962 maintains top performance when functioning as the Seal, Rear Axle Shaft; Wheel Seal unit at its Rear. The component 15823962 is constructed from durable material and its dimensions span 4.7 x 3.4 x 0.8 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hub Seal; Axle Seals; Hub Seals; Seal, Rear Wheel Bearing Oil. The part 15823962 has available replacement options 15007008, 26061024. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.