What tools are required to replace the drive pinion bearings on 9.75 inch and 10.5 inch axles on GMC Savana 3500?

To replace the drive pinion bearings on 9.75 inch and 10.5 inch axles, the following tools are required: pinion driver (J22536), split-plate bearing puller (J22912-01), universal driver handle - non-threaded (J42176), rear Pinion Bearing race installer (J44417), Pinion Bearing race remover - dana 248 (J45703), Pinion Bearing race installer - dana 248 (J45704), Pinion Bearing race remover - dana 248/267 (J45705), Pinion Bearing race remover - dana 286 (J45706), inner bearing race installer (J7818), and universal drive handle - 3/4 in - 10 (J8092). To begin repair work start by lifting the vehicle and extracting the Differential assembly, pinion yoke and pinion oil seal and after that thrust washer should be removed. Use the pinion driver (J22536) to install it firmly on the pinion then drive it out carefully using a hammer while maintaining the pinion within the rear axle housing. The Pinion Bearing race remover - dana 248 (J45703) or Pinion Bearing race remover - dana 286 (J45706) coupled with the universal driver handle - non-threaded (J42176) can be used to remove the inner Pinion Bearing cup and oil deflector by using the drive pinion. The Pinion Bearing race remover - dana 248/267 (J45705) along with universal driver handle - non-threaded (J42176) will extract the outer cup of the Pinion Bearing. To remove the inner Pinion Bearing the split-plate bearing puller (J22912-01) works with a hydraulic press before the selective pinion shim can be taken out. The installation of the inner Pinion Bearing cup needs both Pinion Bearing race installer - dana 248 (J45704) and universal drive handle - 3/4 in - 10 (J8092) when working with the 9.75 inch axle or requires the rear Pinion Bearing race installer (J44417) into combination with the same universal drive handle - 3/4 in - 10 (J8092). Users should mount the outer Pinion Bearing cup through a pairing of the inner bearing race installer (J7818) and the universal drive handle - 3/4 in - 10 (J8092). Determine the required thickness settings of the pinion preload shim and selective pinion shim for the drive pinion before reinstalling the Differential assembly and lubricating the axle with proper fluid while performing the vehicle drop.

OEM GMC Savana 3500 Pinion Bearing

Transmission Pinion Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Pinion Bearings found

View related parts
GMC Savana 3500 Side Bearings Part Number: 11505123
$51.58 MSRP: $156.44
You Save: $104.86 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Pinion Bearings, Inner Part Number: 25824251
$57.72 MSRP: $175.14
You Save: $117.42 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Side Bearings, Front Part Number: 26046759
$36.01 MSRP: $106.64
You Save: $70.63 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential; Bearing; Bearing, Differential Side Gear
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Side Bearings Part Number: 88943839
$48.83 MSRP: $144.56
You Save: $95.73 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Replaces: 26091723
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009, 2003-2004 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 9417784
$24.86 MSRP: $68.16
You Save: $43.30 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pinion Gear Front; Differential Pinion Bearing; Axle Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Wheel Bearing Part Number: 9436881
$57.71 MSRP: $145.36
You Save: $87.65 (61%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- 1996-2017 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 9413427
$54.06 MSRP: $109.76
You Save: $55.70 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2014 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Pinion Bearings, Outer Part Number: 22943108
$35.88 MSRP: $71.37
You Save: $35.49 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Axle Bearing
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 23243839
$56.88 MSRP: $113.16
You Save: $56.28 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing
- Replaces: 09418357, 09418356, 12479221, 15286375, 26053758, 20997052, 22786621, 9418357, 9418356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024, 1996-2011 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Side Bearings Part Number: 25824250
$66.28 MSRP: $131.86
You Save: $65.58 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
- Replaces: 09418390, 9418390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Pinion Bearings, Rear Part Number: 22943106
$71.56 MSRP: $142.38
You Save: $70.82 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Drive Pinion Rear And Intermediate; Differential Pinion Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Pinion Seal, Outer Part Number: 25824252
$50.36 MSRP: $94.58
You Save: $44.22 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Pinion Bearings, Outer Part Number: 15534483
$52.41 MSRP: $94.85
You Save: $42.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing
- Position: Outer
- Replaces: 09440836, 9440836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2010 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Rear Pinion Bearing, Inner Part Number: 15534482
$86.07 MSRP: $254.73
You Save: $168.66 (67%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Inner; Differential Pinion Bearing
- Position: Rear Inner
- Replaces: 09440889, 9440889
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2011 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 9417781
$43.86 MSRP: $103.28
You Save: $59.42 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Side Bearings Part Number: 22786619
$126.72 MSRP: $252.08
You Save: $125.36 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2020 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 9414917
$70.11 MSRP: $133.08
You Save: $62.97 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 9413168
$89.25 MSRP: $167.61
You Save: $78.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Roller; Differential Pinion Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 GMC Savana 3500 | Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 3500 Pinion Bearings Part Number: 9439879
$58.80 MSRP: $105.01
You Save: $46.21 (45%)
Product Specifications
- Other Name: Bearingfrt Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Axle Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Side Bearings Part Number: 9432585
Product Specifications
- Other Name: Bearing Assembly-Differential; Differential Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2010 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

GMC Savana 3500 Pinion Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Pinion Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 3500 Pinion Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Savana 3500 Pinion Bearing Parts and Q&A

Wheel Bearing
9436881
Q: What tools are required to replace the drive pinion bearings on 9.75 inch and 10.5 inch axles on GMC Savana 3500?
A:
To replace the drive pinion bearings on 9.75 inch and 10.5 inch axles, the following tools are required: pinion driver (J22536), split-plate bearing puller (J22912-01), universal driver handle - non-threaded (J42176), rear Pinion Bearing race installer (J44417), Pinion Bearing race remover - dana 248 (J45703), Pinion Bearing race installer - dana 248 (J45704), Pinion Bearing race remover - dana 248/267 (J45705), Pinion Bearing race remover - dana 286 (J45706), inner bearing race installer (J7818), and universal drive handle - 3/4 in - 10 (J8092). To begin repair work start by lifting the vehicle and extracting the Differential assembly, pinion yoke and pinion oil seal and after that thrust washer should be removed. Use the pinion driver (J22536) to install it firmly on the pinion then drive it out carefully using a hammer while maintaining the pinion within the rear axle housing. The Pinion Bearing race remover - dana 248 (J45703) or Pinion Bearing race remover - dana 286 (J45706) coupled with the universal driver handle - non-threaded (J42176) can be used to remove the inner Pinion Bearing cup and oil deflector by using the drive pinion. The Pinion Bearing race remover - dana 248/267 (J45705) along with universal driver handle - non-threaded (J42176) will extract the outer cup of the Pinion Bearing. To remove the inner Pinion Bearing the split-plate bearing puller (J22912-01) works with a hydraulic press before the selective pinion shim can be taken out. The installation of the inner Pinion Bearing cup needs both Pinion Bearing race installer - dana 248 (J45704) and universal drive handle - 3/4 in - 10 (J8092) when working with the 9.75 inch axle or requires the rear Pinion Bearing race installer (J44417) into combination with the same universal drive handle - 3/4 in - 10 (J8092). Users should mount the outer Pinion Bearing cup through a pairing of the inner bearing race installer (J7818) and the universal drive handle - 3/4 in - 10 (J8092). Determine the required thickness settings of the pinion preload shim and selective pinion shim for the drive pinion before reinstalling the Differential assembly and lubricating the axle with proper fluid while performing the vehicle drop.