To remove the left side transmission mount, first, lift and support the vehicle. Remove the left engine splash shield and support the transmission using a transmission jack. Then, you should take off the transmission mount nuts (1, 2) and transmission mount bracket bolts (1, 2). Lift the transmission a small amount as to provide clearance for tilting the transmission mount then loosen and take of the transmission mount bracket bolt and then take off the transmission mount and bracket from the vehicle. For installation, replace the transmission mount and bracket back onto the vehicle ensuring that the transmission mount bracket bolt and tighten it to 90 nm (66 lb ft) and the installation of the transmission mount bracket bolt tighten to 90 nm (66 lb ft). Lower the transmission until the bracket is on top of the mount, then install the transmission mount bracket bolt and tighten to 90 nm (66 lb ft). Replace the transmission jack and install the transmission mount nut tightened to 75 nm (55 lb ft) and the transmission mount nut tightened 90 nm (66 lb ft). Finally, install the left engine splash shield and let go of the vehicle.