How to replace the rear upper door moldings on GMC Yukon?

You need to remove the expanding plastic fasteners at the window latch close-out when changing your rear door upper garnish molding. Use the Door Trim Pad Clip Remover (J 38778) to free the retainer from its seat before removing the liftgate trim panel. Begin installation by aligning the retainers through the liftgate holes then press down on the seat retainers before putting expanding plastic retainers at the window latch close-out.

How to Replace Door Moldings on the Side Door Lock Pillar (CF5) on GMC Sonoma?

In order to replace the garnish molding on the side door lock pillar (CF5), remove front and rear door sill trim plates, upper, and lower front seat belt anchor bolts. Next, remove the front side door lock pillar garnish molding in the motor home, while passing the seat belt through. To install, position the front side door lock pillar garnish molding back onto vehicle, feeding seat belt once again. It is necessary to abide by the Fastener Notice in Service Precautions. Then, install the upper and lower front seat belt anchor bolts and tighten to 70 N.m (52 lb ft), and finally, attach the front and back doors sill trim plates.

OEM GMC Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

648 Door Moldings found

View related parts
GMC Belt Weatherstrip, Rear Passenger Side Part Number: 23227745
$134.01 MSRP: $200.36
You Save: $66.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Window Belt Reveal *Exterior Bright; Door Moldings; Weatherstrip; Molding, Back/Rear Window Glass Reveal
- Position: Rear Passenger Side
- Replaces: 23445729, 20963514
Fits the following GMC Models:
- Yukon | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Side Molding, Rear Center Driver Side Part Number: 22763943
$176.30 MSRP: $263.59
You Save: $87.29 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Center *Service Primer; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Rear Center Driver Side
- Replaces: 20978019, 25922683
Fits the following GMC Models:
- Acadia | 2013-2016 | Denali | 6 Cyl 3.6 L GAS
View related parts
GMC Lower Molding, Dark Smoke Gray, Rear Passenger Side Part Number: 25824836
$187.00 MSRP: $279.57
You Save: $92.57 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Lower *Dark Smoke Gry; Door Moldings; Molding, Rear Side Door
- Position: Rear Lower Passenger Side
Fits the following GMC Models:
- Terrain | 2010-2017 | SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Lower Molding, Gray, Front Passenger Side Part Number: 23134746
$187.00 MSRP: $279.57
You Save: $92.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Front Side Door Lower *Gray Y; Door Moldings; Molding, Front Side Door
- Position: Front Lower Passenger Side
- Replaces: 25824834
Fits the following GMC Models:
- Terrain | 2010-2017 | SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Belt Weatherstrip, Rear Driver Side Part Number: 23227744
$105.01 MSRP: $150.26
You Save: $45.25 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Window Belt Reveal *Exterior Bright; Door Moldings; Weatherstrip; Molding, Back/Rear Window Glass Reveal
- Position: Rear Driver Side
- Replaces: 23445728, 20963513
Fits the following GMC Models:
- Yukon | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Lower Molding, Gray, Front Driver Side Part Number: 23134747
$187.00 MSRP: $279.57
You Save: $92.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Front Side Door Lower *Gray Y; Door Moldings; Molding, Front Side Door
- Position: Front Lower Driver Side
- Replaces: 25824833
Fits the following GMC Models:
- Terrain | 2010-2017 | SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Lower Molding, Dark Smoke Gray, Rear Driver Side Part Number: 25824835
$187.00 MSRP: $279.57
You Save: $92.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Lower *Dark Smoke Gry; Door Moldings; Molding, Rear Side Door
- Position: Rear Lower Driver Side
Fits the following GMC Models:
- Terrain | 2010-2017 | SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Body Side Molding, Rear Passenger Side Part Number: 22775450
$62.89 MSRP: $89.98
You Save: $27.09 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door *Ex Brt Chromm; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration; Molding, Body Side
- Position: Rear Passenger Side
Fits the following GMC Models:
- Sierra 1500 | 2014-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2015-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Belt Weatherstrip, Front Driver Side Part Number: 23193172
$137.47 MSRP: $205.52
You Save: $68.05 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Door Window Reveal
- Position: Front Driver Side
- Replaces: 20984715, 22855200
Fits the following GMC Models:
- Terrain | 2011-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Lower Molding, Black, Front Driver Side Part Number: 84541033
$144.20 MSRP: $215.59
You Save: $71.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Front Side Door Lower *Black; Door Moldings; Molding, Front Side Door
- Position: Front Lower Driver Side
- Replaced by: 85617227
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Lower Molding, Rear Passenger Side Part Number: 84463451
$257.77 MSRP: $385.38
You Save: $127.61 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Lower; Door Moldings; Molding, Rear Side Door
- Position: Rear Lower Passenger Side
- Replaces: 84251066, 84161227
Fits the following GMC Models:
- Acadia | 2017-2023 | Denali | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Side Molding, Rear Center Passenger Side Part Number: 22763942
$198.05 MSRP: $296.09
You Save: $98.04 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Center *Service Primer; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Rear Center Passenger Side
- Replaces: 20978018, 25922684
Fits the following GMC Models:
- Acadia | 2013-2016 | Denali | 6 Cyl 3.6 L GAS
View related parts
GMC Lower Molding, Front Passenger Side Part Number: 84602962
$192.30 MSRP: $287.51
You Save: $95.21 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings
- Position: Front Passenger Side
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Body Side Molding, Front Driver Side Part Number: 22832436
$80.98 MSRP: $120.52
You Save: $39.54 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Front Driver Side
Fits the following GMC Models:
- Yukon | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Front Molding, Rear Passenger Side Part Number: 85136433
$108.00 MSRP: $160.75
You Save: $52.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Applique, Rear Quarter Panel; Molding, Cab And Load Carrier Outer Side Decoration; Molding, Fuel Door & Body Side
- Position: Rear Passenger Side
- Replaces: 84836520
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Belt Molding, Black, Front Driver Side Part Number: 84905932
$59.58 MSRP: $88.68
You Save: $29.10 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Door Window Reveal; Door Moldings; Molding, Front Door Window(Inner/Outer)
- Position: Front Driver Side
- Replaces: 84778812, 84733833, 84677185
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4 | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Belt Molding, Black, Front Passenger Side Part Number: 84844390
$53.76 MSRP: $80.02
You Save: $26.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Front Side Door Window Belt Reveal *Black; Door Moldings; Molding, Front Door Window(Inner/Outer)
- Position: Front Passenger Side
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Belt Molding, Black, Front Driver Side Part Number: 84842462
$60.48 MSRP: $90.02
You Save: $29.54 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Door Window Reveal; Door Moldings; Molding, Front Door Window(Inner/Outer)
- Position: Front Driver Side
- Replaces: 84614720, 84543761, 84831773, 84476087
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | Base, Elevation, Pro | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Lower Molding, Black, Rear Driver Side Part Number: 84538084
$114.93 MSRP: $171.83
You Save: $56.90 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Assembly-Rear Side Door *Black; Door Moldings; Molding, Rear Side Door
- Position: Rear Driver Side
- Replaces: 23187743
Fits the following GMC Models:
- Terrain | 2018-2024 | SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Upper Molding, Front Passenger Side Part Number: 84938761
$97.52 MSRP: $145.15
You Save: $47.63 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Door Window Reveal; Door Moldings; Molding, Front Door Window(Inner/Outer)
- Position: Front Passenger Side
- Replaces: 84692191, 84733978
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4 | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS

| Page 1 of 33 |Next >

1-20 of 648 Results

GMC Door Moldings

Choose OEM Door Moldings, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Door Moldings. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

The GMC Door Moldings protect your sides of the rig against random blows in the parking lot and grit on the road. GMC was an off-shoot of early workshop in 1901 and continues to manufacture trucks and SUVs that shake off huge loads. Its ladder frames last years of towing as engines effortlessly pull prodigal torque over perfectly adjusted gear ratios. Cabins remain silent with door seals and active noise canceling that cancels the drone on lengthy asphalt roads. Surround view, hitch camera control, and lane warning are provided to drivers in order to make giant trailers or narrow streets in urban areas less anxiety-inducing. MultiPro tailgate folds, lifts and climbs to ensure that cargo management remains fast when it comes to weekend projects or job site requirements. The models roll high without rattling, and all of them are in shake rigs and corrosion chambers many weeks. Door Moldings are rigid belts running along the edges, backed by 3M acrylic foam tape, that seal up the openings, deflect gravel, and absorb door to door hits before the paint or sheet metal is damaged. One peel and press movement makes the owners update stance on all GMCs without breaking a single clip. The drivers also appreciate the fact that Door Moldings help to even out wind rush along the flanks, eliminate wind hiss and add gentle style line fitment reminiscent of factory trim.

GMC Door Moldings Parts and Q&A

Body Side Molding, Outer Passenger Side
15176375
Q: How to replace the rear upper door moldings on GMC Yukon?
A:
You need to remove the expanding plastic fasteners at the window latch close-out when changing your rear door upper garnish molding. Use the Door Trim Pad Clip Remover (J 38778) to free the retainer from its seat before removing the liftgate trim panel. Begin installation by aligning the retainers through the liftgate holes then press down on the seat retainers before putting expanding plastic retainers at the window latch close-out.
Body Side Molding, Outer
15761413
Q: How to Replace Door Moldings on the Side Door Lock Pillar (CF5) on GMC Sonoma?
A:
In order to replace the garnish molding on the side door lock pillar (CF5), remove front and rear door sill trim plates, upper, and lower front seat belt anchor bolts. Next, remove the front side door lock pillar garnish molding in the motor home, while passing the seat belt through. To install, position the front side door lock pillar garnish molding back onto vehicle, feeding seat belt once again. It is necessary to abide by the Fastener Notice in Service Precautions. Then, install the upper and lower front seat belt anchor bolts and tighten to 70 N.m (52 lb ft), and finally, attach the front and back doors sill trim plates.