To remove the auxiliary Engine Oil Cooler first uninstall the upper air baffle, right engine splash shield, lower air this. Next, disconnect the support clip from the Engine Oil Cooler lines and reposition the hose claps on Power Steering Cooler lines before disconnecting the power steering Oil Cooler lines from the Power Steering Cooler and the Engine Oil Cooler lines from the Engine Oil Cooler. Next, the upper bolt and lower bolts along with the Engine Oil Cooler/ power steering cooler must be removed, after which the cooler assembly will be taken out of the vehicle. For installation take the Engine Oil Cooler/power steering cooler and place it in the vehicle, take the upper bolt and tighten then followed by the lower bolts both tightened to 2 n.m (18 lb in). Replace the Engine Oil Cooler lines back in the Engine Oil Cooler, place the power steering Oil Cooler lines back in the Power Steering Cooler, reposition the hose clamps, and secure a support clip to the Engine Oil Cooler lines. Finally, install the right engine splash shield, lower air baffle, and upper air baffle and put in the right amount of engine oil and power steering fluid.