How to replace the Idle Control Valve on Chevrolet Impala?

Starting by turning off the ignition you must disconnect the Idle Control Valve before you replace it. The removal of two retention screws enables you to disconnect the Idle Control Valve with its o-ring. Check that the cone (pintle) extension exceeds 28 mm (1 - 1/8 in) before installation by compressing it manually if needed. Place the Idle Control Valve inside the Intake Manifold after installing its new o-ring while using 2 screws tightened to 3.0 n.m (27 lb in). The electrical connector requires connection to the Idle Control Valve after which you should reset the pcm through a 10-second ignition on phase followed by a 5-second ignition off period. Start the engine while letting it achieve regular operating temperature.

How to replace the Idle Control Valve on Chevrolet Malibu?

One must begin Idle Control Valve replacement by dismounting the throttle control cable bracket from the Throttle Body followed by the removal of the canister purge valve and subsequent disconnection of the Idle Control Valve electrical connector. The process begins by removing two screws which attach the Idle Control Valve and extracting the valve and its o-ring from the unit. The installation of a new valve begins with a confirmation that the pintle reaches a position less than 28 mm (1-1/8 in) from the motor housing. Install the new idle control o-ring before you place the Idle Control Valve into the Throttle Body by tightening its attaching screws to 3 n.m (27 lb in). First connect the electrical connector to the Idle Control Valve while installing the canister purge valve followed by attaching the throttle control cable bracket. To reset the Idle Control Valve users should turn the ignition on followed by off before starting the engine while letting it reach normal operating temperature.

OEM Chevrolet Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Idle Control Valves found

View related parts
Chevrolet Idle Speed Control Part Number: 17113598
$136.73 MSRP: $243.06
You Save: $106.33 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Throttle Body/Carburetor; Idle Air Control Valve
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002 | Base, North Face, On Road Edition, Z71 | 8 Cyl 5.3 L GAS
- Camaro | 2000-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
- Silverado 1500 | 1999-2002 | Base, LS, LT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 HD | 2001-2002 | LS, LT | 8 Cyl 6.0 L GAS
- Silverado 2500 | 1999-2002 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Silverado 2500 HD | 2001-2002 | Base, LS, LT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Silverado 3500 | 2001-2002 | Base, LS, LT | 8 Cyl 6.0 L GAS
- Suburban 1500 | 2000-2002 | Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Suburban 2500 | 2000-2002 | Base, LS, LT | 8 Cyl 6.0 L GAS
- Tahoe | 2000-2002 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Idle Speed Control Part Number: 94859011
$270.85 MSRP: $508.65
You Save: $237.80 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Throttle Body/Carburetor; Idle Air Control Valve
Fits the following Chevrolet Models:
- Prizm | 1998-2002 | Base, LSi | 4 Cyl 1.8 L GAS
View related parts
Chevrolet Idle Speed Control Part Number: 17111888
$17.54 MSRP: $57.54
You Save: $40.00 (70%)
ADD TO CART
Product Specifications
- Other Name: Housing Kit, Multi Portion Fuel Injection Idle Air; Idle Air Control Valve; Idle Air Housing
Fits the following Chevrolet Models:
- Beretta | 1988 | Base | 6 Cyl 2.8 L GAS
- Celebrity | 1987-1989 | Base, CL, Estate, Eurosport | 6 Cyl 2.8 L GAS
- Corsica | 1988 | Base, LT | 6 Cyl 2.8 L GAS
View More
View related parts
Chevrolet Idle Air Control Valve Part Number: 12482707
Product Specifications
- Other Name: Valve Kit, Throttle Body/Carburetor; Idle Speed Control
- Replaces: 17113200, 17113297
Fits the following Chevrolet Models:
- Cavalier | 1996-2002 | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
- Malibu | 1997-1999 | Base | 4 Cyl 2.4 L GAS
- S10 | 1998-2003 | Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View More
View related parts
Chevrolet Idle Speed Control Part Number: 17113209
Product Specifications
- Other Name: Valve Kit, Throttle Body/Carburetor; Idle Air Control Valve
Fits the following Chevrolet Models:
- Astro | 1996-2005 | Base, LS, LT | 6 Cyl 4.3 L GAS
- Blazer | 1996-2005 | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- C1500 | 1996-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C1500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS
- C2500 | 1996-2000 | Base, Cheyenne, LS, Silverado, WT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C3500 | 1996-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- Express 1500 | 2003-2007, 1996-2000 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Express 2500 | 1996-2006 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- Express 3500 | 1996-2002 | Base, LS | 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Idle Speed Control Part Number: 17079599
Product Specifications
- Other Name: Valve Assembly, Throttle Body Injector Idle Air Control; Idle Air Control Valve; Motor, Fuel Injection Air Meter; Motor, Throttle Body/Carburetor; Motor, Idle Air Control
Fits the following Chevrolet Models:
- Cavalier | 1984-1986 | Base, CL, CS, Olympic, RS, Type-10 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Idle Air Control Valve Part Number: 17113167
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Idle Speed Control; Valve Kit, Throttle Body/Carburetor
Fits the following Chevrolet Models:
- Cavalier | 1995 | LS, Z24 | 4 Cyl 2.3 L GAS
View related parts
Chevrolet Idle Speed Control Part Number: 17113391
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Idle Air Control Valve
Fits the following Chevrolet Models:
- Camaro | 1998-1999 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Idle Speed Control Part Number: 91176845
Product Specifications
- Other Name: Iac Valve Assembly (On Esn); Idle Air Control Valve; Valve, Throttle Body/Carburetor
- Replaces: 91173919
Fits the following Chevrolet Models:
- Metro | 1998-2001 | Base, LSi | 4 Cyl 1.3 L GAS
View related parts
Chevrolet Idle Speed Control Part Number: 96068661
Product Specifications
- Other Name: Valve, Idle Speed Control Solenoid; Idle Air Control Valve; Valve, Throttle Body/Carburetor
Fits the following Chevrolet Models:
- Tracker | 1998 | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Idle Speed Control Part Number: 17079135
Product Specifications
- Other Name: Control; Idle Air Control Valve
Fits the following Chevrolet Models:
- Celebrity | 1984-1985 | Base, Classic, Estate, Eurosport | 6 Cyl 4.3 L DIESEL
View related parts
Chevrolet Idle Speed Control Part Number: 17111288
Product Specifications
- Other Name: Idle Air Control Valve
- Replaced by: 25527077
Fits the following Chevrolet Models:
- Cavalier | 1985-1986 | Base, CL, CS, RS, Type-10, Z24 | 6 Cyl 2.8 L GAS
- Citation II | 1985 | Base, X-11 | 6 Cyl 2.8 L GAS
- Corvette | 1985-1988 | 35th Anniversary Edition, Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Idle Air Control Valve Part Number: 17111460
Product Specifications
- Other Name: Idle Speed Control
- Replaced by: 25527077
Fits the following Chevrolet Models:
- Blazer | 1987-1991 | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Caprice | 1991-1992 | Base, Classic, Classic LTZ | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Cavalier | 1984-1986 | Base, CL, CS, Olympic, RS, Type-10 | 4 Cyl 2.0 L GAS
- El Camino | 1985-1987 | Base, Conquista, SS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
- G10 | 1987-1991 | Beauville, Bonaventure, Chevy Van, Sportvan | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- G20 | 1987-1991 | Beauville, Chevy Van, Sportvan | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- G30 | 1987-1991 | Beauville, Chevy Van, Hi-Cube, Sportvan | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS
- R10 | 1987 | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- R10 Suburban | 1987-1988 | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- R1500 Suburban | 1989-1991 | Scottsdale, Silverado | 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Idle Speed Control Motor Part Number: 17078220
Product Specifications
- Other Name: Valve, Carburetor Idle Air Bleed; Idle Air Control Valve
Fits the following Chevrolet Models:
- Camaro | 1984 | Sport | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Idle Air Control Valve Part Number: 17112349
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Valve Assembly; Idle Speed Control Motor; Multi Portion Fuel Injection Idle Air Kit; Throttle Body/Carburetor Kit
Fits the following Chevrolet Models:
- Camaro | 1990-1992 | RS, RS Heritage Edition | 6 Cyl 3.1 L GAS
- Lumina | 1992-1995 | Euro, LS, Z34 | 6 Cyl 3.4 L GAS
- Monte Carlo | 1995 | Z34 | 6 Cyl 3.4 L GAS
View More
View related parts
Chevrolet Idle Speed Control Part Number: 17112712
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Idle Air Control Valve; Valve, Throttle Body/Carburetor
Fits the following Chevrolet Models:
- S10 | 1992 | Base, EL, Tahoe | 6 Cyl 4.3 L GAS
- S10 Blazer | 1992 | Base, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Idle Speed Control Part Number: 17112351
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Idle Air Control Valve
- Replaced by: 19351706
Fits the following Chevrolet Models:
- Corvette | 1990 | ZR-1 | 8 Cyl 5.7 L GAS
- Lumina | 1990-1991 | Base, Euro | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Idle Air Control Valve Part Number: 19351706
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Fuel Injection Idle Air Control Valve; Idle Speed Control; Valve Assembly; Valve Kit, Multi Portion Fuel Injection Idle Air
- Replaces: 17112350, 17112351
Fits the following Chevrolet Models:
- Beretta | 1992-1996 | Base, GT, GTZ, Z26 | 6 Cyl 3.1 L GAS
- Camaro | 1993-1995 | Base | 6 Cyl 3.4 L GAS
- Cavalier | 1987-1994 | Base, CS, RS, Z24 | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
- Corsica | 1992-1996 | Base, LT, LTZ | 6 Cyl 3.1 L GAS
- Corvette | 1992-1995, 1990 | ZR-1 | 8 Cyl 5.7 L GAS
- Impala | 2000-2005 | Base | 6 Cyl 3.4 L GAS
- Lumina | 1990-2001 | Base, Euro, LS, LTZ | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS
- Lumina APV | 1996 | Base, LS | 6 Cyl 3.4 L GAS
- Malibu | 1997-2003 | Base, LS | 6 Cyl 3.1 L GAS
- Monte Carlo | 1995-2005 | LS, LS Competition, LS Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View More
View related parts
Chevrolet Idle Speed Control Part Number: 17079444
Product Specifications
- Other Name: Valve Assembly, Throttle Body Injector Idle Air Control; Idle Air Control Valve
Fits the following Chevrolet Models:
- Celebrity | 1984-1985 | Base, Classic, Estate, Eurosport | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Chevrolet Idle Speed Control Part Number: 91176844
Product Specifications
- Other Name: Iac Valve Assembly (On Esn); Idle Air Control Valve; Valve, Throttle Body/Carburetor
- Replaces: 91173918
Fits the following Chevrolet Models:
- Metro | 1998-2000 | Base

| Page 1 of 2 |Next >

1-20 of 36 Results

Chevrolet Idle Control Valve

Choose OEM Idle Control Valve, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Idle Control Valve. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Idle Control Valve Parts and Q&A

Idle Air Control Valve
19333189
Q: How to replace the Idle Control Valve on Chevrolet Impala?
A:
Starting by turning off the ignition you must disconnect the Idle Control Valve before you replace it. The removal of two retention screws enables you to disconnect the Idle Control Valve with its o-ring. Check that the cone (pintle) extension exceeds 28 mm (1 - 1/8 in) before installation by compressing it manually if needed. Place the Idle Control Valve inside the Intake Manifold after installing its new o-ring while using 2 screws tightened to 3.0 n.m (27 lb in). The electrical connector requires connection to the Idle Control Valve after which you should reset the pcm through a 10-second ignition on phase followed by a 5-second ignition off period. Start the engine while letting it achieve regular operating temperature.
Idle Air Control Valve
19351706
Q: How to replace the Idle Control Valve on Chevrolet Malibu?
A:
One must begin Idle Control Valve replacement by dismounting the throttle control cable bracket from the Throttle Body followed by the removal of the canister purge valve and subsequent disconnection of the Idle Control Valve electrical connector. The process begins by removing two screws which attach the Idle Control Valve and extracting the valve and its o-ring from the unit. The installation of a new valve begins with a confirmation that the pintle reaches a position less than 28 mm (1-1/8 in) from the motor housing. Install the new idle control o-ring before you place the Idle Control Valve into the Throttle Body by tightening its attaching screws to 3 n.m (27 lb in). First connect the electrical connector to the Idle Control Valve while installing the canister purge valve followed by attaching the throttle control cable bracket. To reset the Idle Control Valve users should turn the ignition on followed by off before starting the engine while letting it reach normal operating temperature.