How to replace the fuel pump module on Chevrolet K3500?

The necessary equipment for replacing the Fuel Tank pump module consists of fuel pressure gauge (J 34730-1A) and fuel sender lock nut wrench (J 39765). The procedure starts with disconnecting the negative Battery Cable together with fuel system pressure relief. You must drain all fuel from the tank before removing it using proper instructions for your car type. Move on to remove the fuel sender assembly while recording the original position of the fuel strainer. Use one hand to support the fuel sender assembly while using your other hand to pull out the strainer from its position; throw away the strainer following the examination process. Look for contamination on the strainer before replacing it with a new one while carrying out proper Fuel Tank cleaning procedures. Cut the wire leading to the Fuel Pump while also removing the retaining clip on the Fuel Level Sensor electrical connector before removing the foil level sensor electrical connector from underneath the fuel sender cover. The retention clip of the Fuel Level Sensor needs removal before compressing the locking tangs to extract the sensor. Disconnect the Fuel Pressure Sensor device. First install the Fuel Pressure Sensor followed by the Fuel Level Sensor and then install the sensor retaining clip. Use the electrical connector to connect with the Fuel Level Sensor then fasten it with the electrical connector retaining clip. Install the Fuel Pump electrical connector after disconnecting it. Follow the noted position from disassembly when installing a new fuel strainer by placing it toward the bottom of the fuel sender and ensuring complete seating. A proper replacement procedure should be followed to install both the fuel sender assembly and the Fuel Tank. Rinse the Fuel Tank then mount the fuel filler cap. Rejoin the negative Battery Cable as the last step. A leak inspection should be done by turning the ignition switch on for 2 seconds followed by a 10-second off period before another on cycle to detect any fuel leaks.

How to replace the fuel pump module on Chevrolet Suburban 1500?

The necessary tools for Fuel Tank pump module replacement include a fuel pressure gauge (J 34730 1A) together with a fuel sender lock nut wrench (J 39765). To begin the task you need to remove the negative Battery Cable while also emptying fuel system pressure. The Fuel Tank drainage should happen before extracting it and removing the fuel sender assembly. The process starts with noting the fuel strainer position on the fuel sender followed by supporting the fuel sender assembly with one hand while pulling the strainer off for discardable inspection. Before reusing the strainer inspect its condition and obtain a new one if necessary. The Fuel Tank needs cleaning when needed. Disconnect the Fuel Pump electrical connector before removing the Fuel Level Sensor electrical connector retaining clip and finally disconnecting this connector from beneath the fuel sender cover. Push the retaining clip of the Fuel Level Sensor and then grip its locking tangs until you release the sensor unit. Next disconnect the Fuel Pressure Sensor. You can start the installation process by putting in the Fuel Pressure Sensor then the Fuel Level Sensor before setting the retaining clip for the Fuel Level Sensor. Finish by attaching the Fuel Level Sensor electrical connector while putting back its retaining clip followed by linking the Fuel Pump electrical connector . Position the new fuel strainer at its original position like before disassembly while ensuring complete bottom immersion. Put back the fuel sending unit assembly and the Fuel Tank after refilling the tank with fuel and adding the fuel cap. End the procedure by reinstalling the negative Battery Cable then examine for leakage under the following sequence: on switch for two seconds followed by off for ten seconds and another on check for fuel leaks.

OEM Chevrolet Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

435 Fuel Pumps found

View related parts
Chevrolet Fuel Pump Part Number: 13592337
$240.30 MSRP: $493.82
You Save: $253.52 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Fuel Pump Assembly; Module Kit, Fuel Tank Meter/Pump
- Replaces: 13577471, 13585453, 19208721
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 13592335
$212.98 MSRP: $437.66
You Save: $224.68 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit, Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Sending Unit; Fuel Pump Assembly; Module Kit, Fuel Tank Meter/Pump
- Replaces: 13585454, 19208719
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 13578371
$213.90 MSRP: $439.57
You Save: $225.67 (52%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Fuel Tank; Module Kit, Fuel Tank Meter/Pump
Fits the following Chevrolet Models:
- Malibu | 2013-2015 | LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 13589705
$233.06 MSRP: $478.93
You Save: $245.87 (52%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump; Module Kit, Fuel Pump
- Replaces: 13505235, 13581914
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2011-2014 | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 13585446
$276.56 MSRP: $500.58
You Save: $224.02 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump
- Replaced by: 19436013
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2015-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Silverado 3500 HD | 2015-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 13578388
$262.94 MSRP: $540.32
You Save: $277.38 (52%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2011-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2011-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Pump Part Number: 19369884
$327.44 MSRP: $691.97
You Save: $364.53 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit, Fuel Tank Fuel Pump; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Module, Fuel Tank Meter/Pump
- Replaces: 19331241, 25316320, 19177237
Fits the following Chevrolet Models:
- Camaro | 1999-2002 | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 23120337
$502.37 MSRP: $909.26
You Save: $406.89 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump; Module Kit, Fuel Pump
- Replaces: 19257914, 19168396, 19179824
Fits the following Chevrolet Models:
- Impala | 2009-2010 | LS, LT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 25202767
$310.65 MSRP: $562.25
You Save: $251.60 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Fuel; Fuel Sending Unit; Pump, Fuel Pump
- Replaced by: 28290016
Fits the following Chevrolet Models:
- Camaro | 2021-2022 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 23120334
$406.42 MSRP: $735.60
You Save: $329.18 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Pump Module Assembly; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump; Module Kit, Fuel Pump
- Replaces: 19179789, 19257910, 19168393
Fits the following Chevrolet Models:
- Impala | 2008-2011 | 50th Anniversary Edition, LS, LT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 23120347
$292.82 MSRP: $601.75
You Save: $308.93 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Module Kit, Fuel Tank Meter/Pump; Module Kit, Fuel Pump; Fuel Level Sensor
- Replaces: 19179785, 19168390
Fits the following Chevrolet Models:
- Impala | 2008-2010 | 50th Anniversary Edition, LS, LT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 25205775
$115.91 MSRP: $238.18
You Save: $122.27 (52%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Fuel; Pump, Fuel Pump
- Replaced by: 25207068
Fits the following Chevrolet Models:
- Equinox | 2023 | LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 25202766
$175.96 MSRP: $330.44
You Save: $154.48 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Fuel; Fuel Sending Unit; Pump, Fuel Pump
Fits the following Chevrolet Models:
- Malibu | 2021-2022 | Premier | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 84873927
$181.21 MSRP: $372.39
You Save: $191.18 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Sending Unit; Fuel Pump Assembly; Module Kit, Fuel Tank Meter/Pump
- Replaces: 23377983, 84244657
Fits the following Chevrolet Models:
- Camaro | 2016-2024 | LS, LT, LT1, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 23120331
$196.70 MSRP: $547.16
You Save: $350.46 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Fuel Pump Module Assembly; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump; Module Kit, Fuel Pump
- Replaces: 19257912, 19168392, 19179752
Fits the following Chevrolet Models:
- Impala | 2008-2011 | LS, LT, LTZ, Police | 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Fuel Pump Part Number: 84441842
$188.08 MSRP: $353.19
You Save: $165.11 (47%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump
- Replaced by: 85009114
- Replaces: 84322860
Fits the following Chevrolet Models:
- Equinox | 2018-2019 | LT, Premier | 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Fuel Pump Part Number: 84200596
$232.53 MSRP: $420.86
You Save: $188.33 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump
- Replaced by: 84923426
- Replaces: 84174275
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 13513409
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor; Electric Fuel Pump; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump
- Replaces: 13582489
Fits the following Chevrolet Models:
- Silverado 1500 | 2014-2018 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fuel Pump Part Number: 19331970
Product Specifications
- Other Name: Module Kit, Fuel Tank Fuel Pump; Fuel Sending Unit; Module Kit, Fuel Tank Meter/Pump; Module Kit, Fuel Pump
- Replaces: 19167483, 88965395, 19303396, 19133469, 19149556
Fits the following Chevrolet Models:
- Silverado | 2005 | 5.3L V8
- Silverado 1500 | 2006 | LS, LT, WT | 8 Cyl 5.3 L FLEX
View related parts
Chevrolet Fuel Pump Part Number: 84873930
$128.21 MSRP: $229.98
You Save: $101.77 (45%)
Product Specifications
- Other Name: Module Kit-Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Sending Unit; Fuel Pump Assembly; Module Kit, Fuel Tank Meter/Pump
- Replaced by: 86294272
- Replaces: 23349599, 84244658
Fits the following Chevrolet Models:
- Camaro | 2016-2022 | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS

| Page 1 of 22 |Next >

1-20 of 435 Results

Chevrolet Fuel Pump

Choose OEM Fuel Pump, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Fuel Pump. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Fuel Pump Parts and Q&A

Fuel Pump
15754298
Q: How to replace the fuel pump module on Chevrolet K3500?
A:
The necessary equipment for replacing the Fuel Tank pump module consists of fuel pressure gauge (J 34730-1A) and fuel sender lock nut wrench (J 39765). The procedure starts with disconnecting the negative Battery Cable together with fuel system pressure relief. You must drain all fuel from the tank before removing it using proper instructions for your car type. Move on to remove the fuel sender assembly while recording the original position of the fuel strainer. Use one hand to support the fuel sender assembly while using your other hand to pull out the strainer from its position; throw away the strainer following the examination process. Look for contamination on the strainer before replacing it with a new one while carrying out proper Fuel Tank cleaning procedures. Cut the wire leading to the Fuel Pump while also removing the retaining clip on the Fuel Level Sensor electrical connector before removing the foil level sensor electrical connector from underneath the fuel sender cover. The retention clip of the Fuel Level Sensor needs removal before compressing the locking tangs to extract the sensor. Disconnect the Fuel Pressure Sensor device. First install the Fuel Pressure Sensor followed by the Fuel Level Sensor and then install the sensor retaining clip. Use the electrical connector to connect with the Fuel Level Sensor then fasten it with the electrical connector retaining clip. Install the Fuel Pump electrical connector after disconnecting it. Follow the noted position from disassembly when installing a new fuel strainer by placing it toward the bottom of the fuel sender and ensuring complete seating. A proper replacement procedure should be followed to install both the fuel sender assembly and the Fuel Tank. Rinse the Fuel Tank then mount the fuel filler cap. Rejoin the negative Battery Cable as the last step. A leak inspection should be done by turning the ignition switch on for 2 seconds followed by a 10-second off period before another on cycle to detect any fuel leaks.
Module
15759666
Q: How to replace the fuel pump module on Chevrolet Suburban 1500?
A:
The necessary tools for Fuel Tank pump module replacement include a fuel pressure gauge (J 34730 1A) together with a fuel sender lock nut wrench (J 39765). To begin the task you need to remove the negative Battery Cable while also emptying fuel system pressure. The Fuel Tank drainage should happen before extracting it and removing the fuel sender assembly. The process starts with noting the fuel strainer position on the fuel sender followed by supporting the fuel sender assembly with one hand while pulling the strainer off for discardable inspection. Before reusing the strainer inspect its condition and obtain a new one if necessary. The Fuel Tank needs cleaning when needed. Disconnect the Fuel Pump electrical connector before removing the Fuel Level Sensor electrical connector retaining clip and finally disconnecting this connector from beneath the fuel sender cover. Push the retaining clip of the Fuel Level Sensor and then grip its locking tangs until you release the sensor unit. Next disconnect the Fuel Pressure Sensor. You can start the installation process by putting in the Fuel Pressure Sensor then the Fuel Level Sensor before setting the retaining clip for the Fuel Level Sensor. Finish by attaching the Fuel Level Sensor electrical connector while putting back its retaining clip followed by linking the Fuel Pump electrical connector . Position the new fuel strainer at its original position like before disassembly while ensuring complete bottom immersion. Put back the fuel sending unit assembly and the Fuel Tank after refilling the tank with fuel and adding the fuel cap. End the procedure by reinstalling the negative Battery Cable then examine for leakage under the following sequence: on switch for two seconds followed by off for ten seconds and another on check for fuel leaks.