Other Name: Strainer Kit, Fuel; Fuel Pump Strainer; Fuel Strainer; Strainer Kit, Fuel Tank Gage
Fits the following Chevrolet Models:
Tahoe | 1997 | LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
Chevrolet Fuel Pump Strainer
Choose OEM Fuel Pump Strainer, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Fuel Pump Strainer. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to Properly Replace a Fuel Pump Strainer on a Chevrolet Blazer?
A:
Your first step in replacing the Fuel Pump Strainer should be disconnecting the negative Battery Cable while following the battery disconnect caution guidelines. Before starting the task users must remove pressure from the fuel system and empty the Fuel Tank. The next step includes Fuel Tank removal together with the fuel sender assembly where you note the position of the Fuel Pump Strainer installed on the fuel sender. Use a hand to stabilize the fuel sender assembly while using the other hand to pull off the strainer from the fuel sender assembly for inspection prior to disposal. Throw away contaminated strainers when you replace them and perform a Fuel Tank cleaning operation. To install the new strainer place it into the marked position on the fuel sender base before it achieves full seating. After installation of the fuel sender assembly the Fuel Tank needs refilling along with the fuel filler cap. The negative Battery Cable should be reconnected while inspecting for leakage by running the ignition for two seconds followed by a ten-second off period before replaying the ignition to confirm fuel leakage.
Q: How to replace the Fuel Pump Strainer on Chevrolet Astro?
A:
When replacing the Fuel Pump Strainer it is important to remove the fuel sender assembly then record the initial orientation of the strainer on the fuel sender. You should grasp the fuel sender assembly with one hand as you use your other hand to pull off the strainer from the fuel sender. After checking the strainer discard it. A strainer failure requires replacement. At the same time, clean the fuel tank before continuing. Install a new Fuel Pump Strainer by aligning it with the noted position from disassembly then fully push it onto the bottom of the fuel sender before reinstalling the fuel sender assembly.