How to replace the Fuel Pump Strainer on Chevrolet S10?

Before starting Fuel Pump Strainer replacement you need to disconnect the negative Battery Cable while following the battery disconnect caution. First drain the Fuel Tank while relieving the fuel system pressure. Next step involves removing the Fuel Tank together with the fuel sender assembly while paying attention to the Fuel Pump Strainer's original position on the fuel sender. You must secure the fuel sender assembly with one hand while using your other hand to hold the strainer so you can pull it off the sender then discard it after examination. The strainer requires replacement if it becomes contaminated during inspection so the Fuel Tank must be cleaned before reusing. Behind the noted position on the fuel sender you should insert a new Fuel Pump Strainer and fully push it until complete seat can be achieved. Reinstall the fuel sender assembly together with the Fuel Tank while adding new fuel into the tank and installing the fuel filler cap. The inspection for leaks can begin by reconnecting the negative Battery Cable followed by checking for fuel leaks by enabling the ignition for two seconds, after which it should be turned off for ten seconds before enabling the ignition a second time for the leak inspection.

OEM Chevrolet S10 Fuel Pump Strainer

Fuel Tank Sender Strainer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Pump Strainers found

View related parts
Chevrolet S10 Fuel Strainer Part Number: 25055461
$8.12 MSRP: $15.24
You Save: $7.12 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strainer, Fuel Sender Fuel; Fuel Pump Strainer; Gauge; Strainer, Fuel Tank Gage; Filter, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Fuel Strainer Part Number: 25166285
$12.60 MSRP: $21.14
You Save: $8.54 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strainer Package, Fuel; Filter; Strainer; Strainer Kit, Fuel Pump Pressure; Strainer Kit, Fuel Tank Gage; Strainer, Fuel Tank Gage
- Replaces: 25121625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2001 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Fuel Strainer Part Number: 25314928
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Fuel Strainer Part Number: 25314890
Product Specifications
- Other Name: Strainer Kit, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Chevrolet S10 | LS, ZR5 | 6 Cyl 4.3 L GAS

Chevrolet S10 Fuel Pump Strainer

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Pump Strainer. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Fuel Pump Strainer includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

It changes the Chevrolet S10 Fuel Pump Strainer as one of the critical parts that speaks volumes about the Chevrolet S10 series. Located in a rather privileged place beneath the fuel pump, this is a Fuel Pump Strainer that allows removing impurities from the fuel before it gets into the engine, adding to the general safety of the vehicle and making it more efficient. In its design it allows only the clean fuel to pass through while preventing the debris and contaminant from getting into the fuel pump motor to extend the life of the fuel system. Fuel Pump Strainer is compatible with Chevrolet S10 models of different years, and the sturdiness of the product does not degrade with time starting from the 1981 year model up to the recent ones. This compatibility underlines the relevance of the device in adding that all vehicles belonging to the S10 line shall perform optimally. Chevrolet S10 Fuel Pump Strainer is among the remarkable automotive spare parts in the market regarding its strength and its efficiency in properly filtering fuel hence resulting to a smooth running engine and better fuel consumption. Also, the fact that the Fuel Pump Strainer helps to avoid chance failures in the fuel system also contributes to the safety of the Chevrolet S10 that is appreciated by drivers. This Chevrolet S10 Fuel Pump Strainer is not just an alternate; it is an imperative factor for the vehicle's performance and durability that makes Chevrolet S10 to be a favorable choice for trucks' lovers.

Chevrolet S10 Fuel Pump Strainer Parts and Q&A

Fuel Strainer
25314928
Q: How to replace the Fuel Pump Strainer on Chevrolet S10?
A:
Before starting Fuel Pump Strainer replacement you need to disconnect the negative Battery Cable while following the battery disconnect caution. First drain the Fuel Tank while relieving the fuel system pressure. Next step involves removing the Fuel Tank together with the fuel sender assembly while paying attention to the Fuel Pump Strainer's original position on the fuel sender. You must secure the fuel sender assembly with one hand while using your other hand to hold the strainer so you can pull it off the sender then discard it after examination. The strainer requires replacement if it becomes contaminated during inspection so the Fuel Tank must be cleaned before reusing. Behind the noted position on the fuel sender you should insert a new Fuel Pump Strainer and fully push it until complete seat can be achieved. Reinstall the fuel sender assembly together with the Fuel Tank while adding new fuel into the tank and installing the fuel filler cap. The inspection for leaks can begin by reconnecting the negative Battery Cable followed by checking for fuel leaks by enabling the ignition for two seconds, after which it should be turned off for ten seconds before enabling the ignition a second time for the leak inspection.