How to replace the Hood Cable on Chevrolet Colorado?

The cable replacement process starts with grille and Hood Latch removal before freeing the cable from its Hood Latch assembly home. Before installation label where mechanic's wire will pass through then add it to the outside cable end. Push the cable grommet through the cowl panel until it reaches the vehicle interior space after letting go of the retainers which hold the cable to the inner fender and radiator support. After removing the knee bolster hood release handle bolts you should detach the cable from the handle. Remove the mechanic's wire while it remains positioned for future cable installation and pull the cable through the cowl panel and out behind the sound insulation. Pull the cable out of the vehicle's structure. Before installation attach the mechanic's wire to the new cable end and use this guide to feed the cable beneath sound insulation before passing the exterior section through the cowl panel opening. Install the cable to the release handle while positioning the cable grommet to the cowl panel before putting back the release handle onto the knee bolster. Secure the bolts which hold the release handle in place to the knee bolster by tightening them to 1 n.m (9 lb in). Follow cable routing guidelines then secure the cable at inner fender retainers before connecting it to the Hood Latch assembly and reattaching the Hood Latch and finishing with grille installation.

How to replace the Hood Cable on Chevrolet S10?

Start the replacement of Hood Cable by first opening and supporting the hood and secondly disconnecting the negative Battery Cable. The underhood fuse block must be removed first by unplugging the windshield wiper Washer Reservoir before you remove the securing screws. Following this you can pull the unit from the fender. The Hood Latch must remain blocked to avoid locking mechanisms until you install the new cable. A flat-bladed tool will free the clip on the primary latch assembly to allow you to uninstall the cable assembly from the primary latch. The installation process requires home mechanics to authorize wire usage as a cable extension. A flat-bladed tool should be used to open the hoodie retention clips. The Hood Cable must be pulled backwards through an opening between the radiator support and left fender along with behind the antilock brake module. The body hinge trim panel and Hood Cable grommet require removal along with the adhesive tape that supports the cable near the cowl. Take out the Hood Cable from the vehicle while guiding the cable through the cowl panel beneath the instrument panel from inside. Start by installing the Hood Latch assembly through the cowl as you direct the cable from inside the vehicle followed by these points: left fender beyond the antilock brake module, underhood fuse block, and windshield wiper/washer reservoir before wrapping it around the radiator support end. Wait to install the cowl side panel Hood Cable and lever bolts until their torque stays at 9 n.m (80 lb in). After that, apply adhesive tape to keep the cable in place on the cowl side. After mounting the Hood Cable within the retaining clips and grommet you should connect it to the Hood Latch cable before the latch itself. Install the body hinge pillar trim panel followed by screws that secure the underhood fuse block and return the windshield wiper/washer reservoir. Last step involves connecting the negative cable while inspecting the Hood Cable for correct operation then closing the hood.

OEM Chevrolet Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

125 Hood Cables found

View related parts
Chevrolet Release Cable Part Number: 20840749
$46.50 MSRP: $69.21
You Save: $22.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 20756258
Fits the following Chevrolet Models:
- Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 6 Cyl 3.0 L FLEX
View related parts
Chevrolet Release Cable Part Number: 23434316
$44.77 MSRP: $66.63
You Save: $21.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 23439956, 22770129, 13312787, 20944973
Fits the following Chevrolet Models:
- Impala | 2014-2020 | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Malibu | 2013-2015 | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
- Malibu Limited | 2016 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
View More
View related parts
Chevrolet Release Handle, Black Part Number: 96476604
$15.89 MSRP: $23.65
You Save: $7.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Hood Latch
- Replaces: 96449523
Fits the following Chevrolet Models:
- Aveo | 2007-2011 | LS, LT | 4 Cyl 1.6 L GAS
- Aveo5 | 2009-2011 | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Release Cable Part Number: 15769412
$88.70 MSRP: $132.03
You Save: $43.33 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 15728525, 15016468
Fits the following Chevrolet Models:
- C1500 | 1995-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1995-2000 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1995-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1995-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1995-2000 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1995-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Release Cable Part Number: 21997874
$41.91 MSRP: $62.38
You Save: $20.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 15160712
Fits the following Chevrolet Models:
- SSR | 2003-2006 | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Trailblazer | 2002-2009 | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Trailblazer EXT | 2002-2006 | LS, LT, North Face | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Release Cable Part Number: 15242999
$50.25 MSRP: $74.80
You Save: $24.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable; Gutter
- Replaces: 25677972
Fits the following Chevrolet Models:
- Silverado 1500 | 2007-2013 | LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
- Silverado 2500 HD | 2007-2013 | LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2007-2013 | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View More
View related parts
Chevrolet Release Cable Part Number: 15751510
$52.32 MSRP: $77.87
You Save: $25.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
Fits the following Chevrolet Models:
- Express 1500 | 2003-2014 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Express 2500 | 2003-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Express 3500 | 2003-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View More
View related parts
Chevrolet Release Cable Part Number: 84755336
$29.88 MSRP: $45.08
You Save: $15.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch
- Replaced by: 85602059
Fits the following Chevrolet Models:
- Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Release Cable Part Number: 20959350
$31.01 MSRP: $46.16
You Save: $15.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Package, Hood Latch; Hood Release Cable
- Replaces: 92233983, 92232162, 92243196
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Release Cable Part Number: 84279473
$44.77 MSRP: $66.63
You Save: $21.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 23486864
Fits the following Chevrolet Models:
- Colorado | 2015-2022 | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Release Cable, Gray Part Number: 42711125
$29.40 MSRP: $43.76
You Save: $14.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Hood Primary Latch Release Cable *Dark Ash Gre; Hood Release Cable; Handle, Hood Latch
Fits the following Chevrolet Models:
- Bolt EUV | 2022-2023 | LT, Premier | BATTERY EV (EV/BEV)
View related parts
Chevrolet Release Handle, Black Part Number: 23286357
$5.61 MSRP: $8.35
You Save: $2.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Hood Latch
- Replaces: 23213717
Fits the following Chevrolet Models:
- Cruze | 2016-2019 | Diesel, L, LS, LT, Premier | 4 Cyl 1.4 L GAS, 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Release Cable Part Number: 23285643
$7.66 MSRP: $11.40
You Save: $3.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
Fits the following Chevrolet Models:
- Volt | 2016-2019 | LT, Premier | 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chevrolet Release Cable Part Number: 92229980
$34.79 MSRP: $51.78
You Save: $16.99 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
Fits the following Chevrolet Models:
- Caprice | 2011-2013 | PPV | 6 Cyl 3.6 L FLEX, 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Release Cable, Gray Part Number: 84026393
$6.69 MSRP: $9.95
You Save: $3.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Primary & Secondary Latch Release *Atmosphere R; Hood Release Cable; Cable, Hood Latch
- Replaces: 23332136
Fits the following Chevrolet Models:
- Cruze | 2016-2019 | Diesel, L, LS, LT, Premier | 4 Cyl 1.4 L GAS, 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Release Handle, Gray Part Number: 23332138
$6.03 MSRP: $8.97
You Save: $2.94 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Hood Primary & Secondary Latch Release *Dark Atmospherr; Handle, Hood Latch
Fits the following Chevrolet Models:
- Cruze | 2016-2019 | Diesel, L, LS, LT, Premier | 4 Cyl 1.4 L GAS, 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Release Lever Part Number: 87844557
$31.67 MSRP: $47.14
You Save: $15.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Secondary Latch Release; Release Cable
- Replaced by: 87850146
Fits the following Chevrolet Models:
- Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Release Cable Part Number: 42357514
$11.51 MSRP: $17.14
You Save: $5.63 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
Fits the following Chevrolet Models:
- Bolt EV | 2017-2023 | LT, Premier | BATTERY EV (EV/BEV)
View related parts
Chevrolet Release Cable Part Number: 84100312
$44.77 MSRP: $66.63
You Save: $21.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 23356304
Fits the following Chevrolet Models:
- Malibu | 2016-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Release Cable Part Number: 22759325
$50.47 MSRP: $75.12
You Save: $24.65 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 25980928
Fits the following Chevrolet Models:
- Express 1500 | 2006-2014 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Express 2500 | 2006-2024 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Express 3500 | 2006-2024 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View More

| Page 1 of 7 |Next >

1-20 of 125 Results

Chevrolet Hood Cable

Choose OEM Hood Cable, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Hood Cable. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Hood Cable allows you to pop the hood fast and hold it in the air. Since 1911, Chevy has presented vehicles that combine everyday functionality with striking designs and engines that have become stronger and stronger, enabling drivers to make it through traffic jams, mountain passes and freeway expanses without any hassle or pretense. Chevrolet continues to accelerate with intelligent features such as Super Cruise, displaying the fact that the brand is concerned with actual freedom and not the empty showroom monotony. Whether it is a small-commuter vehicle or an extended-roof SUV, Chevy provides a drive that can start and be applied anywhere, be comfortable, and willing to take the family out or even on a solo run during a harsh environment and mixed road conditions. The hours spent on the road do not seem so exhausting due to the silence of the cabins, comfortable seats, and light but stable steering. The very recent models are based on the flexible steel-core Hood Cable installation running between the dashboard handle and the main latch thus one pull disengages the first latch but the other lock prevents an easy lift in high gear, saving motorists the embarrassment of having something stuck in their jams on the road. Clean, keep lightly lubricated, kink-free and the Hood Cable on even the old Chevy will ensure that the hood will raise with ease and the backup lock will take a stand.

Chevrolet Hood Cable Parts and Q&A

Release Cable, Black
25854190
Q: How to replace the Hood Cable on Chevrolet Colorado?
A:
The cable replacement process starts with grille and Hood Latch removal before freeing the cable from its Hood Latch assembly home. Before installation label where mechanic's wire will pass through then add it to the outside cable end. Push the cable grommet through the cowl panel until it reaches the vehicle interior space after letting go of the retainers which hold the cable to the inner fender and radiator support. After removing the knee bolster hood release handle bolts you should detach the cable from the handle. Remove the mechanic's wire while it remains positioned for future cable installation and pull the cable through the cowl panel and out behind the sound insulation. Pull the cable out of the vehicle's structure. Before installation attach the mechanic's wire to the new cable end and use this guide to feed the cable beneath sound insulation before passing the exterior section through the cowl panel opening. Install the cable to the release handle while positioning the cable grommet to the cowl panel before putting back the release handle onto the knee bolster. Secure the bolts which hold the release handle in place to the knee bolster by tightening them to 1 n.m (9 lb in). Follow cable routing guidelines then secure the cable at inner fender retainers before connecting it to the Hood Latch assembly and reattaching the Hood Latch and finishing with grille installation.
Release Cable
15097973
Q: How to replace the Hood Cable on Chevrolet S10?
A:
Start the replacement of Hood Cable by first opening and supporting the hood and secondly disconnecting the negative Battery Cable. The underhood fuse block must be removed first by unplugging the windshield wiper Washer Reservoir before you remove the securing screws. Following this you can pull the unit from the fender. The Hood Latch must remain blocked to avoid locking mechanisms until you install the new cable. A flat-bladed tool will free the clip on the primary latch assembly to allow you to uninstall the cable assembly from the primary latch. The installation process requires home mechanics to authorize wire usage as a cable extension. A flat-bladed tool should be used to open the hoodie retention clips. The Hood Cable must be pulled backwards through an opening between the radiator support and left fender along with behind the antilock brake module. The body hinge trim panel and Hood Cable grommet require removal along with the adhesive tape that supports the cable near the cowl. Take out the Hood Cable from the vehicle while guiding the cable through the cowl panel beneath the instrument panel from inside. Start by installing the Hood Latch assembly through the cowl as you direct the cable from inside the vehicle followed by these points: left fender beyond the antilock brake module, underhood fuse block, and windshield wiper/washer reservoir before wrapping it around the radiator support end. Wait to install the cowl side panel Hood Cable and lever bolts until their torque stays at 9 n.m (80 lb in). After that, apply adhesive tape to keep the cable in place on the cowl side. After mounting the Hood Cable within the retaining clips and grommet you should connect it to the Hood Latch cable before the latch itself. Install the body hinge pillar trim panel followed by screws that secure the underhood fuse block and return the windshield wiper/washer reservoir. Last step involves connecting the negative cable while inspecting the Hood Cable for correct operation then closing the hood.