To replace the evaporative emission (EVAP) canister purge solenoid valve, one has to turn off the ignition first. Remove the electrical connector from the evap canister purge solenoid valve and then remove the hose/pipe. Remove the retaining bolt and, take out the evap canister purge solenoid valve , from the
Intake Manifold. For the intact operation, locate the evap canister purge solenoid valve on the Intake Manifold and secur e the retaing bolt with a torque of 10 n.m (89 lb in) (Fastener Notice in Service Precautions). Next, reattach the hose/pipe and the electric connection to the evap canister purge solenoid valve.