How to replace the rear axle control trailing arm and rear suspension control arm bracket on Chevrolet Malibu?

To replace the rear axle control trailing arm as well as the rear suspension control arm bracket, first lift and support the vehicle, and then remove the tire and wheel assembly. Now, remove the park brake cable retaining bolt and bracket from the trailing arm, and also use the correct tool to detach the park brake cables retaining clip from the trailing arm bracket . Remove the trailing arm bracket mounting, then avail the bolts that join the trailing arm to the knuckle. Remove the trailing arm and bracket from the frame and knuckle and remove the bolt and nut that is coupling the trailing arm bracket to the trailing arm. For installation, using a bolt and nut from trailing arm bracket, hook to trailing arm, tighten trailing arm to bracket nut 60 Nm (44 lb ft), and use the J 45059 to rotate nut another 60 degrees. Position the trailing arm and bracket assembly onto the knuckle and frame , and install the bolts from the trailing arm to the knuckle, tightening them recommended torque of 80 Nm (133 lb ft). Mount the mounting bolts to the trailing arm bracket, with the tightness set at 60 Nm (44 lb ft), and to position the bolt another 60 degrees with the J 45059. Then, install park brake cable retaining clip to the trailing arm bracket , install park brake cable retaining bracket and bolt to the trailing arm and tighten mounting bolt to 10 Nm (89 lb in). Lastly, lower the vehicle and reinstall the tire and wheel assembly.

How to replace the lower control arm bracket on Chevrolet SSR?

To replace the lower Control Arm Bracket do the following; first remove the tire and wheel, raise the vehicle and support it. Next, unscrew the stabilizer shaft link lower retaining nut and remove the stabilizer shaft link and the washer from the lower Control Arm. Take off the lower Control Arm to lower Control Arm Bracket mounting nuts, marking the direction of the bolts for an easy re-installation later followed by the removal of the lower Control Arm to lower control loop arm bracket mounting bolts. Pivot the lower Control Arm outward and downward to expose the lower Control Arm Bracket, then remove the lower Control Arm Bracket attaching bolt from the frame and remove the lower Control Arm Bracket from the vehicle. For installation, bolt on the lower Control Arm Bracket onto vehicle while you are guided by the fastener notice. Tighten the lower Control Arm Bracket mounting bolts to the frame to 260 nm (192 ft. Lbs. For the front lower Control Arm Bracket mounting bolt) and 240 (177 ft. Lbs. For rear lower Control Arm Bracket mounting bolts). Then, install the lower Control Arm to the lower Control Arm Bracket while making sure that it is parallel while installing and tightening the lower Control Arm mounting bolts and nuts that keep the lower Control Arm bushings properly aligned. Attach the lower Control Arm to lower Control Arm Bracket mounting nuts by tightening them to the specification of 110 nm (81 ft. L BS). A washer should be replaced between the stabilizer shaft link and the lower Control Arm with the washer of the same type, since standard washers should not be used. Then, install the stabilizer shaft link and washer to the lower Control Arm, then install the stabilizer shaft link retaining nut that must tighten to 145 nm (107 ft. Lbs.). Lastly, reinstall the tire and wheel, bring the vehicle down and check the alignment of the front wheel.

OEM Chevrolet Control Arm Bracket

Suspension Arm Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

95 Control Arm Brackets found

View related parts
Chevrolet Mount Bracket, Rear Part Number: 10262701
$12.07 MSRP: $19.87
You Save: $7.80 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm; Trailing Arm Bracket
- Position: Rear
Fits the following Chevrolet Models:
- Impala | 2000-2013 | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Impala Limited | 2014-2016 | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX
- Monte Carlo | 2000-2007 | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Lower Control Arm Bracket, Front Part Number: 22672863
$8.06 MSRP: $12.80
You Save: $4.74 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Wheel Lower Control Arm; Control Arm Bracket; Bracket; Bracket, Steering Knuckle Control Arm
- Position: Front Lower
Fits the following Chevrolet Models:
- Cobalt | 2005-2010 | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
- HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Front Crossmember Part Number: 12474450
$159.00 MSRP: $252.43
You Save: $93.43 (38%)
ADD TO CART
Product Specifications
- Other Name: Brace Kit, Steering Knuckle Upper And Lower Control Arm; Support Brace; Crossmember, Frame Bell Housing(Attaches To Frame And Side Rails)
- Position: Front Lower
Fits the following Chevrolet Models:
- Avalanche 2500 | 2003-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
- Silverado 2500 | 1999-2004 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Silverado 2500 HD | 2001-2007 | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Silverado 2500 HD Classic | 2007 | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Suburban 2500 | 2009-2013, 2000-2006 | Base, LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
Chevrolet Bushing Kit, Rear Driver Side Part Number: 84325910
$57.11 MSRP: $89.45
You Save: $32.34 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Rear Axle; Axle Support Bushing; Bracket, Rear Axle Control Arm
- Position: Rear Driver Side
- Replaces: 23299309, 84162934
Fits the following Chevrolet Models:
- Volt | 2016-2019 | LT, Premier | 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chevrolet Front Bracket, Rear Passenger Side Part Number: 23328155
$74.75 MSRP: $118.67
You Save: $43.92 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm
- Position: Rear Passenger Side
Fits the following Chevrolet Models:
- Camaro | 2017-2024 | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Front Bracket, Rear Driver Side Part Number: 23328154
$69.71 MSRP: $118.67
You Save: $48.96 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Camaro | 2017-2024 | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Bushing Kit, Rear Passenger Side Part Number: 84325909
$57.11 MSRP: $89.45
You Save: $32.34 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Rear Axle; Axle Support Bushing; Bracket, Rear Axle Control Arm
- Position: Rear Passenger Side
- Replaces: 23299310, 84162933
Fits the following Chevrolet Models:
- Volt | 2016-2019 | LT, Premier | 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chevrolet Front Bracket, Rear Driver Side Part Number: 23472995
$63.32 MSRP: $104.31
You Save: $40.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Camaro | 2016-2024 | LS, LT, LT1, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Control Arm Bracket, Rear Passenger Side Part Number: 20771901
$7.82 MSRP: $12.89
You Save: $5.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm; Upper Control Arm Bracket
- Position: Rear Passenger Side
- Replaces: 10354747, 25849749
Fits the following Chevrolet Models:
- Corvette | 1997-2013 | 427, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06 | 5.7L V8, 6.0L V8, 6.2L V8, 7.0L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Control Arm Bracket, Passenger Side Part Number: 10421763
$18.53 MSRP: $29.42
You Save: $10.89 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Steering Knuckle Control Arm; Lift Cylinder Mount Bracket
- Position: Passenger Side
- Replaces: 15837926
Fits the following Chevrolet Models:
- Corvette | 1997-2013 | 427, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Suspension Support, Rear Passenger Side Part Number: 23133699
$82.52 MSRP: $135.95
You Save: $53.43 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Rear Suspension; Bracket, Rear Axle Control Arm
- Position: Rear Passenger Side
Fits the following Chevrolet Models:
- Colorado | 2015-2022 | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Axle Beam Bracket Part Number: 96535101
$16.06 MSRP: $25.49
You Save: $9.43 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm; Bracket
- Position: Rear
Fits the following Chevrolet Models:
- Aveo | 2004-2011 | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
- Aveo5 | 2007-2011 | LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Control Arm Bracket, Driver Side Part Number: 10421762
$18.12 MSRP: $28.77
You Save: $10.65 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Steering Knuckle Control Arm; Lift Cylinder Mount Bracket
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 1997-2013 | 427, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Rear Rail Assy Front Extension, Driver Side Part Number: 42557978
$113.85 MSRP: $180.71
You Save: $66.86 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Bolt EV | 2017-2023 | LT, Premier | BATTERY EV (EV/BEV)
View related parts
Chevrolet Rear Rail Assy Front Extension, Passenger Side Part Number: 42557979
$105.67 MSRP: $174.03
You Save: $68.36 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm
- Position: Rear Passenger Side
Fits the following Chevrolet Models:
- Bolt EV | 2017-2023 | LT, Premier | BATTERY EV (EV/BEV)
View related parts
Chevrolet Mount Bracket, Rear Driver Side Part Number: 22947237
$48.96 MSRP: $84.07
You Save: $35.11 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Rear Axle Control Arm; Strut Mount Rear
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Malibu | 2016-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Lower Control Arm Bracket Part Number: 95441277
$4.86 MSRP: $7.73
You Save: $2.87 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Steering Knuckle Control Arm; Control Arm Bracket
- Position: Front Lower
Fits the following Chevrolet Models:
- Bolt EUV | 2022-2023 | LT, Premier | BATTERY EV (EV/BEV)
- Bolt EV | 2017-2023 | LT, Premier | BATTERY EV (EV/BEV)
View related parts
Chevrolet Front Support, Driver Side Part Number: 22982753
$18.61 MSRP: $29.11
You Save: $10.50 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Cradle Mount Bolt; Front Bracket; Bracket, Rear Axle Control Arm
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Malibu | 2016-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Front Support, Passenger Side Part Number: 22982754
$18.61 MSRP: $29.11
You Save: $10.50 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Cradle Mount Bolt; Front Bracket; Bracket, Rear Axle Control Arm
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Malibu | 2016-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Rear Rail Assy Front Extension, Passenger Side Part Number: 23386574
$30.97 MSRP: $46.09
You Save: $15.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension, Door Sill And Rocker
- Position: Passenger Side
- Replaced by: 84050848
Fits the following Chevrolet Models:
- Volt | 2016-2019 | LT, Premier | 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)

| Page 1 of 5 |Next >

1-20 of 95 Results

Chevrolet Control Arm Bracket

Choose OEM Control Arm Bracket, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Control Arm Bracket. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Control Arm Bracket Parts and Q&A

Trailing Arm Bracket, Green Line, Rear Driver Side
15783028
Q: How to replace the rear axle control trailing arm and rear suspension control arm bracket on Chevrolet Malibu?
A:
To replace the rear axle control trailing arm as well as the rear suspension control arm bracket, first lift and support the vehicle, and then remove the tire and wheel assembly. Now, remove the park brake cable retaining bolt and bracket from the trailing arm, and also use the correct tool to detach the park brake cables retaining clip from the trailing arm bracket . Remove the trailing arm bracket mounting, then avail the bolts that join the trailing arm to the knuckle. Remove the trailing arm and bracket from the frame and knuckle and remove the bolt and nut that is coupling the trailing arm bracket to the trailing arm. For installation, using a bolt and nut from trailing arm bracket, hook to trailing arm, tighten trailing arm to bracket nut 60 Nm (44 lb ft), and use the J 45059 to rotate nut another 60 degrees. Position the trailing arm and bracket assembly onto the knuckle and frame , and install the bolts from the trailing arm to the knuckle, tightening them recommended torque of 80 Nm (133 lb ft). Mount the mounting bolts to the trailing arm bracket, with the tightness set at 60 Nm (44 lb ft), and to position the bolt another 60 degrees with the J 45059. Then, install park brake cable retaining clip to the trailing arm bracket , install park brake cable retaining bracket and bolt to the trailing arm and tighten mounting bolt to 10 Nm (89 lb in). Lastly, lower the vehicle and reinstall the tire and wheel assembly.
Mount Bracket, Passenger Side
25918965
Q: How to replace the lower control arm bracket on Chevrolet SSR?
A:
To replace the lower Control Arm Bracket do the following; first remove the tire and wheel, raise the vehicle and support it. Next, unscrew the stabilizer shaft link lower retaining nut and remove the stabilizer shaft link and the washer from the lower Control Arm. Take off the lower Control Arm to lower Control Arm Bracket mounting nuts, marking the direction of the bolts for an easy re-installation later followed by the removal of the lower Control Arm to lower control loop arm bracket mounting bolts. Pivot the lower Control Arm outward and downward to expose the lower Control Arm Bracket, then remove the lower Control Arm Bracket attaching bolt from the frame and remove the lower Control Arm Bracket from the vehicle. For installation, bolt on the lower Control Arm Bracket onto vehicle while you are guided by the fastener notice. Tighten the lower Control Arm Bracket mounting bolts to the frame to 260 nm (192 ft. Lbs. For the front lower Control Arm Bracket mounting bolt) and 240 (177 ft. Lbs. For rear lower Control Arm Bracket mounting bolts). Then, install the lower Control Arm to the lower Control Arm Bracket while making sure that it is parallel while installing and tightening the lower Control Arm mounting bolts and nuts that keep the lower Control Arm bushings properly aligned. Attach the lower Control Arm to lower Control Arm Bracket mounting nuts by tightening them to the specification of 110 nm (81 ft. L BS). A washer should be replaced between the stabilizer shaft link and the lower Control Arm with the washer of the same type, since standard washers should not be used. Then, install the stabilizer shaft link and washer to the lower Control Arm, then install the stabilizer shaft link retaining nut that must tighten to 145 nm (107 ft. Lbs.). Lastly, reinstall the tire and wheel, bring the vehicle down and check the alignment of the front wheel.