How to replace the pushrod and valve rocker arm on Cadillac Escalade?

Start the valve Rocker Arm and push rod replacement by taking out the Rocker Arm cover while setting the rocker arms along with pushrods and pivot support in a rack to maintain their positioning. First remove the Rocker Arm bolts from their positions and subsequently remove the rocker arms together with the Rocker Arm pivot support before dealing with the pushrods. The cleaning and inspection process must be performed on the rocker arms and pushrods when needed for replacement. Engine oil should be used to lubricate both rocker arms and pushrods and the bolt flange of Rocker Arm bolts needs lubrication prior to installation. The Rocker Arm pivot support installation needs to be done after the pushrods arrest correctly in the valve lifter sockets followed by Pushrod installation to achieve proper Rocker Arm seat positioning but avoid bolt tightening at this time. To continue with the installation, set the Crankshaft at top dead center (TDC) compression position during which the number one rocker arms align off the lift curve and the Crankshaft key points to the 1:30 position. While engine position is at number one firing mode, you must tighten Exhaust Valve Rocker Arm bolts on cylinders 1, 2, 7, and 8 to 30 nm (22 ft. Lbs.) followed by Intake Valve bolts for cylinders 1, 3, 4, and 5 to 30 nm (22 ft. Lbs.). The torque specification requires 30 nm (22 ft. Lbs.) for all the exhaust Rocker Arm bolts of cylinders 3, 4, 5, and 6 and for all the intake bolts of cylinders 2, 6, 7, and 8. Screw in the Rocker Arm cover as the last step of installation.

OEM Cadillac Pushrod

Valve Push Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Pushrods found

View related parts
Cadillac Push Rods Part Number: 476525
$17.46 MSRP: $18.97
You Save: $1.51 (8%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Valve Push; Pushrod; Rod, Engine Valve Push Rod; Rod, Engine Valve Push
Fits the following Cadillac Models:
- Cimarron | 1985-1986 | Base, d'Oro | 6 Cyl 2.8 L GAS
View related parts
Cadillac Push Rods Part Number: 10241740
$14.96 MSRP: $23.75
You Save: $8.79 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
- Fleetwood | 1996 | Base, Brougham | 8 Cyl 5.7 L GAS
View related parts
Cadillac Push Rods Part Number: 10238852
$18.77 MSRP: $30.90
You Save: $12.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Valve Push; Pushrod; Rod, Engine Valve Push Rod
Fits the following Cadillac Models:
- CTS | 2009-2015, 2004-2007 | V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Escalade | 2002-2014 | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Escalade ESV | 2003-2014 | Base, Luxury, Platinum, Premium | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Escalade EXT | 2002-2013 | Base, Luxury, Premium | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
Cadillac Push Rods Part Number: 12619828
$3.87 MSRP: $9.12
You Save: $5.25 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Cadillac Models:
- CT5 | 2022 | V Blackwing | 8 Cyl 6.2 L GAS
- CTS | 2016-2019 | V | 8 Cyl 6.2 L GAS
- Escalade | 2015-2023 | Base, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Escalade ESV | 2015-2023 | Base, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
Cadillac Push Rods Part Number: 1618805
$6.40 MSRP: $8.42
You Save: $2.02 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly; Pushrod; Rod, Engine Valve Push Rod
Fits the following Cadillac Models:
- DeVille | 1984-1987 | Base, Cabriolet, d'Elegance, Touring | 8 Cyl 4.1 L GAS
- Eldorado | 1985-1987 | Base, Biarritz, Cabriolet, Touring | 8 Cyl 4.1 L GAS
- Fleetwood | 1984-1987 | 60 Special, 75, 75 Formal, Base, Brougham, Brougham d'Elegance, d'Elegance | 8 Cyl 4.1 L GAS
- Seville | 1984-1987 | Base, Elegante | 8 Cyl 4.1 L GAS
View More
View related parts
Cadillac Push Rods Part Number: 1487602
$13.11
ADD TO CART
Product Specifications
- Other Name: Rod; Pushrod; Rod, Engine Valve Push Rod; Rod, Engine Valve Push
Fits the following Cadillac Models:
- Fleetwood | 1984 | Formal | 8 Cyl 6.0 L GAS
View related parts
Cadillac Push Rods Part Number: 10046173
$12.10 MSRP: $19.20
You Save: $7.10 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Valve Push; Pushrod; Rod, Engine Valve Push Rod
Fits the following Cadillac Models:
- Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Fleetwood | 1993-1995 | Base, Brougham | 8 Cyl 5.7 L GAS
View related parts
Cadillac Push Rods Part Number: 1644842
Product Specifications
- Other Name: Rod Assembly; Pushrod; Rod, Engine Valve Push Rod
Fits the following Cadillac Models:
- 60 Special | 1993 | Base | 8 Cyl 4.9 L GAS
- Allante | 1987-1992 | Base, Value Leader | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
- DeVille | 1988-1995 | Base, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Eldorado | 1988-1993 | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Fleetwood | 1988-1992 | 60 Special, Base, d'Elegance | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Seville | 1988-1993 | Base, STS | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View More
View related parts
Cadillac Push Rods Part Number: 14018769
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Cadillac Models:
- Cimarron | 1984-1986 | Base, d'Oro | 4 Cyl 2.0 L GAS

Cadillac Pushrod

Choose OEM Pushrod, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Pushrod. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Pushrod provides rock solid valve control that ensures that power is flowing and engines are breathing freely. Cadillac did not break in 1902 and is not going to roll over, pursuing new concepts with each model year. Badge announces plush cabins, cruel digital clusters, and an aggressive style that does away with the weary cliches. Riding in a Cadillac is a comfortable and attentive experience due to the silent cabins and the rapid reaction of the steering wheel. Cadillac folding glass roofs and wall-to-wall screens are combined in a single bold form in the hand-built electric Celestiq. Compact crossovers to status sedans on their lineup are not needless flourishes of punch, polish, and warranty confidence. Drivers like obvious view, big trunks, and the quality of the building that shuns everyday maltreatment. The software is automatically updated without the need for individuals to visit dealerships because the new additions are pushed through an over-the-air system. The Pushrod of the overhead valve engines converts the camshaft lift to precise valve timing to ensure sharp combustion and deep torque bands through the entire rev range. Pushrod strength is made of forged steel which sneezes at heat, friction, and high rpm but is light enough to avoid valve float. A simple Pushrod design reduces the number of moving components, reduces engine height, and provides enough space in the engine to allow ample intake runners. The rods remain straight even after long hauls to keep throttle response never ending. Oil frequently applies lubrication to channels so that every lifter and rod slides in perfect harmony at any rate.

Cadillac Pushrod Parts and Q&A

Push Rods
10238852
Q: How to replace the pushrod and valve rocker arm on Cadillac Escalade?
A:
Start the valve Rocker Arm and push rod replacement by taking out the Rocker Arm cover while setting the rocker arms along with pushrods and pivot support in a rack to maintain their positioning. First remove the Rocker Arm bolts from their positions and subsequently remove the rocker arms together with the Rocker Arm pivot support before dealing with the pushrods. The cleaning and inspection process must be performed on the rocker arms and pushrods when needed for replacement. Engine oil should be used to lubricate both rocker arms and pushrods and the bolt flange of Rocker Arm bolts needs lubrication prior to installation. The Rocker Arm pivot support installation needs to be done after the pushrods arrest correctly in the valve lifter sockets followed by Pushrod installation to achieve proper Rocker Arm seat positioning but avoid bolt tightening at this time. To continue with the installation, set the Crankshaft at top dead center (TDC) compression position during which the number one rocker arms align off the lift curve and the Crankshaft key points to the 1:30 position. While engine position is at number one firing mode, you must tighten Exhaust Valve Rocker Arm bolts on cylinders 1, 2, 7, and 8 to 30 nm (22 ft. Lbs.) followed by Intake Valve bolts for cylinders 1, 3, 4, and 5 to 30 nm (22 ft. Lbs.). The torque specification requires 30 nm (22 ft. Lbs.) for all the exhaust Rocker Arm bolts of cylinders 3, 4, 5, and 6 and for all the intake bolts of cylinders 2, 6, 7, and 8. Screw in the Rocker Arm cover as the last step of installation.