Catera | 1997-2001 | Base, Sport | 6 Cyl 3.0 L GAS
| Page 1 of 2 |Next >
1-20 of 24 Results
Cadillac Ignition Lock Cylinder
Choose OEM Ignition Lock Cylinder, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Ignition Lock Cylinder. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the ignition lock cylinder on Cadillac CTS?
A:
The battery negative cable requires removal to replace the ignition switch lock cylinder. Begin by removing the steering column shroud while implementing the correct procedure for models with and without a key release lever knob. Use an allen wrench or similar pick-type tool through the lock housing access hole to gently depress the retainer which allows extraction of the Ignition Lock Cylinder from the lock housing when the key is placed in the run position. The new Ignition Lock Cylinder installation requires positioning it at the run position before putting it into the lock housing while performing rotation checks for proper operation. Complete the installation by placing back the steering column shroud while reconnecting the battery negative cable.
Q: How to replace the ignition lock cylinder on Cadillac Escalade?
A:
In order to change the Ignition Lock Cylinder, you need to disconnect the battery negative cable and disable sir. Lower the knee bolster and pull out the steering column trim covers. Inserting an allen wrench into the hole at the top of the lock cylinder housing, push it down to deploy the tab on the lock cylinder, and have the key in the start position. Pull the lock cylinder out of the housing. During installation, insert the key into the new lock cylinder ensuring that the gears between the Ignition Switch and the lock cylinder housing are aligned properly so that it does not misalign to the point of a no start or battery drain. Using the housing place the park lock cable, align the lock cylinder and install the cylinder into the house. Wrap up the column trim covers and the knee bolster, then activate the sir system and reconnect the battery negative cable.