How to replace the grille emblem on Cadillac CTS?

Heat the loose emblem with the Heat Gun (J 25070) by moving it 152 mm (6 in) from the emblem surface while using circular heat movements until it becomes easily removable from the grille. First separate either the wreath or crest from the grille while avoiding contact with the painted surface. First remove all old emblem adhesive with a plastic flat-bladed tool and then clean the area using 3M(R) P/N 07501 or an equivalent adhesive remover. A ring-free towel should be used to wipe the emblem site after cleaning it with warm soapy water followed by dry-down. To apply the emblem use a 50/50 isopropyl alcohol and water mixture on a clean lint-free cloth while avoiding contact with the adhesive tape or dirt. Line up pins (1 and 2) from the emblem backing with grille holes then apply firm pressure for 30 seconds to guarantee correct adhesive bonding.

How to replace the door emblem/nameplate on Cadillac Escalade?

Start by applying tape around the emblem/nameplate area to shield and keep it aligned during the process. Focus the heat gun at J 25070 aimed from 152 mm (6.0 in) away while moving in circles over the emblem/nameplate surface for 30 seconds. Use a plastic tool to delicate remove the door emblem from its surface after softening it with a heat gun. Take 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501) or its comparable product to wipe away any remaining adhesive from both the door panel surface and the nameplate backing. Use varnish makers and painters (VMP) naptha to clean the door surface for application. When the design marker points are unavailable position new tape for installation. Heat the door surface to 70°F using the heat gun (J 25070) and avoid sticking the emblem/nameplate backing to the hot surface. Steadily put the front part of the emblem/nameplate on the door panel surface as you strip its backing. Hold the emblem/nameplate against the door panel surface until it sticks well before taking off protective tape from the unmarked panel areas.

OEM Cadillac Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

256 Emblems found

View related parts
Cadillac Emblem, Front Part Number: 15263149
$27.71 MSRP: $41.24
You Save: $13.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
Fits the following Cadillac Models:
- CTS | 2008-2015 | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Emblem, Rear Part Number: 23236084
$62.33 MSRP: $92.77
You Save: $30.44 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 23187764
Fits the following Cadillac Models:
- CTS | 2015-2019 | Base, Luxury, Performance, Premium, Premium Luxury, V, Vsport, Vsport Premium, Vsport Premium Luxury | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Emblem, Rear Part Number: 15263152
$64.21 MSRP: $95.57
You Save: $31.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
Fits the following Cadillac Models:
- CTS | 2008-2014 | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Emblem Part Number: 3540652
$33.06 MSRP: $66.01
You Save: $32.95 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Roof Side; Emblem, Roof Panel
Fits the following Cadillac Models:
- DeVille | 1985-1999 | Base, Cabriolet, Concours, d'Elegance, Spring Edition, Touring | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Eldorado | 1984-1991 | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.7 L DIESEL
- Fleetwood | 1989-1996, 1985 | Base, Brougham, Brougham d'Elegance, d'Elegance | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
- Seville | 1985 | Base, Elegante | 8 Cyl 4.1 L GAS
View More
View related parts
Cadillac Emblem, Front Part Number: 25719535
$6.96 MSRP: $10.35
You Save: $3.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
Fits the following Cadillac Models:
- DeVille | 2002-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
- Seville | 2002-2004 | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Emblem, Front Part Number: 25719533
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
Fits the following Cadillac Models:
- DeVille | 2002-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
- Seville | 2002-2004 | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Emblem Part Number: 1625676
Product Specifications
- Other Name: Wheel Center Cap; Emblem, Wheel Cover Appearance
Fits the following Cadillac Models:
- Brougham | 1990-1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Fleetwood | 1993 | Base, Brougham | 8 Cyl 5.7 L GAS
View related parts
Cadillac Emblem, Rear Part Number: 25722726
$55.60 MSRP: $82.75
You Save: $27.15 (33%)
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
Fits the following Cadillac Models:
- DeVille | 2002-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
Cadillac Emblem, Passenger Side Part Number: 20675590
Product Specifications
- Other Name: Emblem, Roof Panel
- Position: Passenger Side
Fits the following Cadillac Models:
- Eldorado | 1987 | Base, Biarritz | 8 Cyl 4.1 L GAS
View related parts
Cadillac Nameplate, Rear Part Number: 20685301
Product Specifications
- Other Name: Plate Assembly-N; Plate,Rear End Panel And Tailgate
- Position: Rear
Fits the following Cadillac Models:
- Brougham | 1990-1991 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Cadillac Nameplate, Rear Part Number: 25688258
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
Fits the following Cadillac Models:
- Eldorado | 1999-2002 | ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
Cadillac Nameplate Part Number: 9695825
Product Specifications
- Other Name: Plate, Rear Quarter Name; Plate Assembly, Rear Quarter Panel (D - Body); Chrome Rear Quarter Panel Upper (C - Body)
- Position: Rear
Fits the following Cadillac Models:
- DeVille | 1984-1987 | Base, Cabriolet, d'Elegance, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Emblem Part Number: 17101635
Product Specifications
- Other Name: Emblem-Engine; Emblem, Engine Fuel Intake Manifold
Fits the following Cadillac Models:
- Seville | 1998-1999 | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Emblem Part Number: 25722751
Product Specifications
- Other Name: Emblem, Tail Lamp
- Replaces: 25642897
Fits the following Cadillac Models:
- Seville | 1998-2004 | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Nameplate, Rear Part Number: 3544700
Product Specifications
- Other Name: Emblem Assembly-Rear Compartment Lid; Plate,Rear End Panel And Tailgate
- Position: Rear
Fits the following Cadillac Models:
- Seville | 1994-1997 | SLS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Nameplate, White Part Number: 20729601
Product Specifications
- Other Name: Plate Assembly-Name Quarter "Brougham D Elegance" *White; Plate, Rear Quarter Panel
Fits the following Cadillac Models:
- Brougham | 1990 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Cadillac Nameplate, Front Rear Part Number: 20209817
Product Specifications
- Other Name: Plate, (Chrome) Rear Quarter Panel Front Of Wheel Opening (E-Body); Plate, Roof Panel Emblem Or Plate; Plate, Rear Quarter Panel
- Position: Front Rear
Fits the following Cadillac Models:
- Fleetwood | 1984-1986 | Brougham, Brougham d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Nameplate, White Part Number: 20209802
Product Specifications
- Other Name: Plate Assembly-*White; Plate, (Chrome) Rear Quarter Panel Wheel Opening (E - Body); Plate, Rear Quarter Panel
Fits the following Cadillac Models:
- Brougham | 1990 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Cadillac Emblem, Rear Part Number: 20360536
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem, Roof Panel
- Position: Rear
Fits the following Cadillac Models:
- Eldorado | 1984-1985 | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Emblem Part Number: 25722716
Product Specifications
- Other Name: Emblem, Hood Panel Ornamentation
Fits the following Cadillac Models:
- DeVille | 2002-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

| Page 1 of 13 |Next >

1-20 of 256 Results

Cadillac Emblem

Choose OEM Emblem, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Emblem. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Emblem Parts and Q&A

Emblem, Front
15851892
Q: How to replace the grille emblem on Cadillac CTS?
A:
Heat the loose emblem with the Heat Gun (J 25070) by moving it 152 mm (6 in) from the emblem surface while using circular heat movements until it becomes easily removable from the grille. First separate either the wreath or crest from the grille while avoiding contact with the painted surface. First remove all old emblem adhesive with a plastic flat-bladed tool and then clean the area using 3M(R) P/N 07501 or an equivalent adhesive remover. A ring-free towel should be used to wipe the emblem site after cleaning it with warm soapy water followed by dry-down. To apply the emblem use a 50/50 isopropyl alcohol and water mixture on a clean lint-free cloth while avoiding contact with the adhesive tape or dirt. Line up pins (1 and 2) from the emblem backing with grille holes then apply firm pressure for 30 seconds to guarantee correct adhesive bonding.
Emblem, Front
25759437
Q: How to replace the door emblem/nameplate on Cadillac Escalade?
A:
Start by applying tape around the emblem/nameplate area to shield and keep it aligned during the process. Focus the heat gun at J 25070 aimed from 152 mm (6.0 in) away while moving in circles over the emblem/nameplate surface for 30 seconds. Use a plastic tool to delicate remove the door emblem from its surface after softening it with a heat gun. Take 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501) or its comparable product to wipe away any remaining adhesive from both the door panel surface and the nameplate backing. Use varnish makers and painters (VMP) naptha to clean the door surface for application. When the design marker points are unavailable position new tape for installation. Heat the door surface to 70°F using the heat gun (J 25070) and avoid sticking the emblem/nameplate backing to the hot surface. Steadily put the front part of the emblem/nameplate on the door panel surface as you strip its backing. Hold the emblem/nameplate against the door panel surface until it sticks well before taking off protective tape from the unmarked panel areas.