Other Name: Plate, Rear End Panel And Tailgate; Emblem, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
Position: Rear
Replaces: 10372469, 25739124, 25762472
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2011 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2005-2010 Cadillac STS | Base, Platinum | 8 Cyl 4.6 L GAS
Cadillac STS Emblem
Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac STS parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac STS Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Q: How to replace an emblem or nameplate on Cadillac STS?
A:
Cover the installation area with tape while you use tape as alignment marks to put in the new emblem or nameplate. Apply J 25070 heat gun over the emblem/nameplate with circular strokes for 30 seconds while placing the gun 152 mm (6 in) from the surface. Gently lift the emblem/nameplate away with a plastic flat tool. Apply a 3M(TM) Scotch Brite molding adhesive remover disc for metal parts (3M(TM) part number 07501) or dip a lint-free cloth into VMP naphtha for plastic products before using VMP naphtha or 50/50 isopropyl alcohol mixture. Wipe down the installation space with the cloth and answer using the exact cleaning solution then dry it thoroughly. Place tape over the area when no emblem/nameplate position is indicated. Use the J 25070 (Heat Gun) until the mounting base reaches 27-41°C (80-105°F) if needed. Place the emblem/nameplate on surface sections that read between 85-90°F or 29-32°C without contact with its adhesive side. Set the emblem/nameplate properly based on the marks and securely place it on its mounting spot while distributing your pressure evenly over the entire bonded surface. Take off the protective tape from the selected surface for installation.