Make sure this part fits

GM 84689784
Emblem

2004-2016 GM

Customer Questions & Expert Answers (12)
GM 84689784 Emblem
  • Part Description
    Emblem, Front Side Door
  • Replaces
    15223483, 15223484
  • Manufacturer
    General Motors
Make sure this part fits
$11.42 MSRP: $17.00
You Save: $5.58 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2016 Buick EnclaveBase, Convenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2006-2010 Buick LaCrosseCX, CXL, CXS, Super4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2006-2010 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2008-2010 Cadillac CTSBase, Luxury, Performance, Premium, V6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2006-2010 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2007-2010 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Platinum8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2010 Cadillac Escalade ESVBase, Platinum8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2010 Cadillac Escalade EXTBase8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2006-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2006-2010 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 84689784 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 84689784 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What temperature should the mounting surface and emblem/nameplate be for the 2006 Cadillac XLR? Posted by Customer
    A:
    Heat the mounting surface to approximately 27-41°C (80-105°F) and ensure the emblem/nameplate is at approximately 29-32°C (85-90°F).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What should be done after positioning the emblem/nameplate for the 2006 Cadillac SRX? Posted by Customer
    A:
    Apply equal pressure to ensure a uniform bond, inspect for proper adhesion, and hand roll any loose ends before removing the tape from the mounting surface.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What temperature should the mounting surface be heated to for the 2009 Cadillac STS? Posted by Customer
    A:
    Approximately 27-41°C (80-105°F) with the J 25070 (Heat Gun).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What should be done with all doors and compartments before applying the emblem/nameplate for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    They should be closed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What should be done after removing the adhesive for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    Clean the installation area with the same solution and dry it thoroughly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    How can you ensure proper adhesion of the emblem/nameplate for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Hand roll the emblem/nameplate to ensure proper adhesion and inspect for bonding before removing the tape from the area around the door emblem.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What should be done for alignment before applying the new emblem/nameplate for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Apply tape over the outer surface of the emblem/nameplate for alignment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What should be used for adhesive removal for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) for body panels, or a lint-free cloth with Varnish Makers and Painters (VMP) Naphtha or a 50/50 mixture of isopropyl alcohol and water for plastic panels.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    How do you facilitate the removal of the emblem/nameplate for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Use a Heat Gun (J 25070) to heat the emblem/nameplate in a circular motion for about 30 seconds.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    What temperature should the mounting surface and emblem/nameplate be heated to for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Heat the mounting surface to approximately 27-41°C (80-105°F) and ensure the emblem/nameplate is around 29-32°C (85-90°F).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    Q:
    How can you ensure proper adhesion of the emblem/nameplate for the 2006 GMC Canyon? Posted by Customer
    A:
    Hand roll the emblem/nameplate to ensure proper adhesion and inspect it for bonding.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Emblem 84689784 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 84689784 Emblem is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 84689784 Emblem fits certain Chevrolet Colorado, Tahoe, Malibu models, as well as GMC Acadia, Sierra 1500, Yukon. Additionally, it is compatible with Cadillac Escalade, CTS, XLR and Buick Enclave, LaCrosse, Lucerne models.
The original GM component designated by Manufacturer Part Number 84689784 maintains top performance when functioning as the Emblem, Front Side Door unit. The component 84689784 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.. The part 84689784 has available replacement options 15223483, 15223484. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.