How to replace the parking brake backing plate on Cadillac CTS?

The first step to replace a parking Brake Backing Plate involves lifting and sustaining the vehicle. Start by removing the rear tire together with the wheel assemblies then proceed to remove the rear Wheel Hub and bearing assembly. Adjust the park brake adjuster nut until the bolt reaches its closed position. Following this pull off the park brake shoe assembly and shoe hold down spring by spreading the shoe slightly when pulling from the actuator assembly. Begin by removing the dust cover then unfastening the two park brake cable bracket to knuckle mounting bolts before removing the backing plate from the knuckle. A flat bladed tool should be utilized to operate the actuator retaining tab outward before pulling the actuator from the backing plate. Place the backing plate first onto the knuckle then establish the actuator relationship between the plate and tab extension towards open before adding the actuator to the backing plate. Fix the two park brake cable bracket to its knuckle mounting bolts at 60 n.m (44 lb ft). To install the park brake shoe assembly first grip the shoe while applying slight spreading pressure before pulling it over the actuator assembly and finally installing the park brake shoe hold down spring. Reposition the park brake while performing the installation of rear Wheel Hub and bearing assembly along with the rear tire and wheel assembly. Finally, lower the vehicle.

How to service and repair the Brake Backing Plate for Duo-Servo Drum Brakes on Cadillac Escalade?

The first step to service and repair duo-servo drum brakes backing plate requires that the linings get removed from the backing plate followed by Wheel Cylinder removal. Before disassembling the backing plate you need to remove both its bolts and washers. Position the backing plate correctly then follow the fastener notice in service precautions. After setting the bolts and washers in place apply torque until they reach 160 nm (118 ft. Lbs.). The installation process includes reinstalling the Wheel Cylinder and linings and performing brake adjustment and bleeding the system until completion.

OEM Cadillac Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

159 Brake Backing Plates found

View related parts
Cadillac Backing Plate, Front Passenger Side Part Number: 20841728
$33.49 MSRP: $60.62
You Save: $27.13 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
Fits the following Cadillac Models:
- SRX | 2010-2016 | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac Backing Plate, Front Driver Side Part Number: 23336594
$27.93 MSRP: $50.58
You Save: $22.65 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Dust Shield; Shield; Shield, Brake Flange Plate; Shield, Brakes
- Position: Front Driver Side
Fits the following Cadillac Models:
- ATS | 2016-2019 | V | 6 Cyl 3.6 L GAS
- CTS | 2016-2019 | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Backing Plate, Front Passenger Side Part Number: 22740573
$17.41 MSRP: $32.72
You Save: $15.31 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
Fits the following Cadillac Models:
- XTS | 2013-2019 | Base, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Backing Plate, Front Driver Side Part Number: 25949350
$13.18 MSRP: $21.69
You Save: $8.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 25861810
Fits the following Cadillac Models:
- CTS | 2008-2014 | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Backing Plate, Rear Passenger Side Part Number: 84203255
$5.13 MSRP: $9.66
You Save: $4.53 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Replaces: 22949933
Fits the following Cadillac Models:
- CT6 | 2016-2020 | Base, Luxury, Platinum, Plug-In, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.2 L GAS
View related parts
Cadillac Backing Plate, Front Driver Side Part Number: 84067896
$7.43 MSRP: $13.96
You Save: $6.53 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Shield, Brake Flange Plate
- Position: Front Driver Side
Fits the following Cadillac Models:
- CT6 | 2019-2020 | Luxury, Platinum, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.2 L GAS
View related parts
Cadillac Backing Plate, Front Passenger Side Part Number: 22740598
$8.87 MSRP: $16.66
You Save: $7.79 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
Fits the following Cadillac Models:
- ATS | 2013-2018 | Base, Luxury, Performance, Premium, Premium Luxury, Premium Performance, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- CT4 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS
View related parts
Cadillac Splash Shield, Front Driver Side Part Number: 84711707
$7.81 MSRP: $14.66
You Save: $6.85 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Shield, Brake Flange Plate
- Position: Front Driver Side
Fits the following Cadillac Models:
- LYRIQ | 2023-2024 | Luxury, Sport, Tech | BATTERY EV (EV/BEV)
View related parts
Cadillac Backing Plate, Rear Driver Side Part Number: 84203254
$5.14 MSRP: $9.69
You Save: $4.55 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Rear Driver Side
- Replaces: 22949932
Fits the following Cadillac Models:
- CT6 | 2016-2020 | Base, Luxury, Platinum, Plug-In, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.2 L GAS
View related parts
Cadillac Backing Plate, Rear Part Number: 84363654
$5.03 MSRP: $9.44
You Save: $4.41 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Shield, Brake Flange Plate
- Position: Rear
Fits the following Cadillac Models:
- CT4 | 2022-2024 | V Blackwing | 6 Cyl 3.6 L GAS
- CT5 | 2022-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Splash Shield, Front Passenger Side Part Number: 84711708
$8.51 MSRP: $15.98
You Save: $7.47 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Shield, Brake Flange Plate
- Position: Front Passenger Side
Fits the following Cadillac Models:
- LYRIQ | 2023-2024 | Luxury, Sport, Tech | BATTERY EV (EV/BEV)
View related parts
Cadillac Knuckle Plate, Front Part Number: 84711709
$5.45 MSRP: $9.86
You Save: $4.41 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Front Wheel Hub & Drum; Deflector, Rear Wheel Bearing Dust
- Position: Front
Fits the following Cadillac Models:
- LYRIQ | 2023-2024 | Luxury, Sport, Tech | BATTERY EV (EV/BEV)
View related parts
Cadillac Backing Plate, Front Driver Side Part Number: 84926922
$10.61 MSRP: $19.93
You Save: $9.32 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 23363946
Fits the following Cadillac Models:
- Escalade | 2021-2023 | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
- Escalade ESV | 2021-2023 | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Backing Plate, Front Passenger Side Part Number: 84067897
$8.51 MSRP: $15.98
You Save: $7.47 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Front Wheel Hub & Drum; Shield, Brake Flange Plate
- Position: Front Passenger Side
Fits the following Cadillac Models:
- CT6 | 2019-2020 | Luxury, Platinum, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.2 L GAS
View related parts
Cadillac Backing Plate, Front Part Number: 22949923
$3.38 MSRP: $6.13
You Save: $2.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Shield, Brake Flange Plate
- Position: Front
Fits the following Cadillac Models:
- CT6 | 2016 | Base, Luxury, Platinum, Premium Luxury | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Cadillac Splash Shield, Driver Side Part Number: 84607030
$13.05 MSRP: $24.50
You Save: $11.45 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Driver Side
Fits the following Cadillac Models:
- XT5 | 2022-2023 | Livery, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- XT6 | 2022-2024 | Sport | 6 Cyl 3.6 L GAS
View related parts
Cadillac Splash Shield, Front Driver Side Part Number: 23447028
$62.33 MSRP: $111.31
You Save: $48.98 (44%)
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
Fits the following Cadillac Models:
- ELR | 2015 | Base | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Cadillac Splash Shield, Front Passenger Side Part Number: 23447029
$62.33 MSRP: $111.31
You Save: $48.98 (44%)
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
Fits the following Cadillac Models:
- ELR | 2015-2016 | Base | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Cadillac Backing Plate, Driver Side Part Number: 15853380
$68.35 MSRP: $122.06
You Save: $53.71 (44%)
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
Fits the following Cadillac Models:
- CTS | 2008-2014 | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac Backing Plate, Driver Side Part Number: 25851190
$82.71 MSRP: $147.70
You Save: $64.99 (44%)
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
Fits the following Cadillac Models:
- CTS | 2009-2015 | V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS

| Page 1 of 8 |Next >

1-20 of 159 Results

Cadillac Brake Backing Plate

Choose OEM Brake Backing Plate, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Brake Backing Plate. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Brake Backing Plate Parts and Q&A

Backing Plate
88951985
Q: How to replace the parking brake backing plate on Cadillac CTS?
A:
The first step to replace a parking Brake Backing Plate involves lifting and sustaining the vehicle. Start by removing the rear tire together with the wheel assemblies then proceed to remove the rear Wheel Hub and bearing assembly. Adjust the park brake adjuster nut until the bolt reaches its closed position. Following this pull off the park brake shoe assembly and shoe hold down spring by spreading the shoe slightly when pulling from the actuator assembly. Begin by removing the dust cover then unfastening the two park brake cable bracket to knuckle mounting bolts before removing the backing plate from the knuckle. A flat bladed tool should be utilized to operate the actuator retaining tab outward before pulling the actuator from the backing plate. Place the backing plate first onto the knuckle then establish the actuator relationship between the plate and tab extension towards open before adding the actuator to the backing plate. Fix the two park brake cable bracket to its knuckle mounting bolts at 60 n.m (44 lb ft). To install the park brake shoe assembly first grip the shoe while applying slight spreading pressure before pulling it over the actuator assembly and finally installing the park brake shoe hold down spring. Reposition the park brake while performing the installation of rear Wheel Hub and bearing assembly along with the rear tire and wheel assembly. Finally, lower the vehicle.
Mounting Plate, Front Driver Side
15725333
Q: How to service and repair the Brake Backing Plate for Duo-Servo Drum Brakes on Cadillac Escalade?
A:
The first step to service and repair duo-servo drum brakes backing plate requires that the linings get removed from the backing plate followed by Wheel Cylinder removal. Before disassembling the backing plate you need to remove both its bolts and washers. Position the backing plate correctly then follow the fastener notice in service precautions. After setting the bolts and washers in place apply torque until they reach 160 nm (118 ft. Lbs.). The installation process includes reinstalling the Wheel Cylinder and linings and performing brake adjustment and bleeding the system until completion.