Other Name: Switch Assembly-Turn Signal *Black; Multi Purpose Switch; Signal Switch; Switch, Turn Signal Lamp
Replaces: 95220563
Fits the following Buick Models:
Regal | 2014-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
| Page 1 of 7 |Next >
1-20 of 122 Results
Buick Wiper Switch
Choose OEM Wiper Switch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Wiper Switch. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to Service the Wiper Switch on Buick LeSabre?
A:
You must begin the windshield washer switch task by disconnecting the Battery Cable and removing the Steering Wheel. Start by taking out these tools before moving to the left closeout panel. Separate the two torx(R) bolts from the multifunction switch before you disconnect its electrical access points to remove the switch component. Place the multifunction switch in position then fasten its two torx(R) bolts and tighten them firmly to 7 nm (62 inch lbs.). Set up the electrical wiring and attach the interface connections before putting back the steering column shields along with the left panel cover and Steering Wheel while installing the tilt lever. Finally, enable the sir system.
Q: How to replace the Windshield Wiper Switch on Buick LaCrosse?
A:
The initial step to shift the Windshield Wiper and washer switch involves disabling the sir system. Take off the Steering Column trim panels and Steering Column wiring tether clamps. Take off the electrical connections from the switch and remember the Steering Column wiring harness path for reinstallation. Lift the wire harness shield from the lower Steering Column area and take out the wire bundle. Disconnect the electrical cable ends of the Windshield Wiper and washer switch before releasing the locking button on the switch to remove it from the Steering Column. Simply insert the new Windshield Wiper and washer switch to the Steering Column and join its electrical connections. Fasten the wire harness to the wire harness shield below the Steering Column while wiring the electrical switch and plugging its electrical connector. Fix both wiring harness tie straps into place afterwards. Place the Steering Column trim covers back on and switch sir (Steering Column Inflator System) on.