Other Name: Flasher; Hazard Flasher; Flasher, Chassis/Body Marker/Hazard; Flasher, Turn Signal Lamp
Fits the following Buick Models:
Skylark | 1996-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
Buick Turn Signal Flasher
Choose OEM Turn Signal Flasher, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Turn Signal Flasher. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the turn signal flasher on Buick LeSabre?
A:
Begin replacement of the hazard lamp flasher by taking out the left IP closeout panel. Remove the signal/hazard warning flasher unit from its housing at the IP carrier then detach the electrical connector from the flasher. Connect the power connector to the turn signal/hazard warning flasher before you put the flasher on the IP carrier and the left panel.
Q: How to replace the hazard and turn signal flasher on Buick Regal?
A:
Start replacement of the hazard and turn signal flasher by taking out the left instrument panel insulator then moving to the steering column filler panel and finally the I/P driver knee bolster bracket. Push the hazard and turn signal flasher to the right until it releases from the slots on the BCM bracket and pull off its electrical connector. Use the electrical connector to attach the hazard and turn signal flasher. Then put the flasher vertical on the BCM bracket and push to the left to install the flasher tabs into the bracket's slots. Reinstall the knee bolster bracket to secure the I/P driver area and attach the steering panel frame before fitting the steering panel cover.