How to replace the A/C Condenser in the HVAC system on Buick LaCrosse?

As the initial step to replace the hvac system condenser technicians must recover all refrigerant present. The procedure starts with Radiator removal before you cut the a/c line coupling free between condenser tube and evaporator tube. The procedure starts by removing the a/c compressor line nut from the condenser while placing the compressor line safely to the side. Afterward, take the condenser out of the vehicle. Throw away both o-ring seals and seal washer pieces. A new condenser requires installation of refrigerant oil during setup. Fitting the new condenser into the vehicle requires the application of both a new a/c compressor hose seal washer and new o-ring seals to the area between the evaporator and condenser tubes. Install the Radiator first and join the evaporator tube to the condenser tube before connecting the a/c line coupling to both tubes. When attaching the a/c compressor hose to the condenser always use a 20mm wrench or pliers to hold the A/C Condenser block fitting steady while torquing the a/c line nut. Use a 20 mm wrench or pliers to hold the A/C Condenser block fitting until you tighten its nut to 17 n.m (12.5 lb ft). The a/c system evacuation and recharging process concludes with a leak inspection of fittings through the halogen leak detector (J 39400-A).

How to replace the A/C Condenser in an A/C system on Buick Regal?

Air cleaner assembly removal and duct assembly follow to start the condenser replacement process along with cross vehicle brace if installed. Refrigerant recovery follows while removing the Radiator with subsequent detaching of the liquid line nut from the condenser and placing the liquid line safely aside. To take out the condenser first remove the compressor line nut then place the compressor line aside and then remove the condenser. When installing your new condenser begin by applying mineral base 525 viscosity refrigerant oil to new o-ring seals then secure them onto compressor hose and liquid line. First join the liquid line to the condenser before tightening the liquid line nut to 27 n.m tension (20 lb ft torque). Then join the compressor hose to the condenser and tighten the compressor hose nut to 16 n.m torque (12 lb ft torque). The Radiator receives replacement before the a/c system undergoes evacuation, charge operations, and leak testing occurs. Guide the replacement of both the air cleaner and duct assembly with the cross vehicle brace if available.

OEM Buick A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

53 A/C Condensers found

View related parts
Buick Condenser Part Number: 42828834
$159.80 MSRP: $226.47
You Save: $66.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C
- Replaces: 95321794
Fits the following Buick Models:
- Encore | 2016-2022 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 1.4L L4, 4 Cyl 1.4 L GAS
View related parts
Buick Condenser Part Number: 84690761
$352.74 MSRP: $552.04
You Save: $199.30 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Replaces: 23322260, 84268017
Fits the following Buick Models:
- Envision | 2016-2020 | Base, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Buick Condenser Part Number: 3094989
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Electra | 1985-1989 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- LeSabre | 1986-1988 | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Condenser Part Number: 52485722
Product Specifications
- Other Name: Condenser, A/C; A/C Condenser; Condenser, A/C Condenser
- Replaces: 03050450, 03037438, 03037439, 3037438, 3037439, 3050450
Fits the following Buick Models:
- Electra | 1984-1989 | Estate Wagon, Limited, Park Avenue | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- LeSabre | 1984-1990 | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Condenser Part Number: 52482102
Product Specifications
- Other Name: Condenser Assembly, A/C; A/C Condenser; Condenser, A/C Condenser
- Replaces: 03095844, 3095844, 52456332
Fits the following Buick Models:
- Electra | 1989-1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1989-1991 | Base, Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1992 | Base, Ultra | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Condenser Assembly Part Number: 84333231
$190.12 MSRP: $284.18
You Save: $94.06 (34%)
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser A/C; Condenser; Condenser, A/C Condenser
- Replaces: 19260303, 23287351, 22845454, 89018842, 89018660
Fits the following Buick Models:
- LaCrosse | 2008-2009 | Super | 8 Cyl 5.3 L GAS
View related parts
Buick Condenser Part Number: 52482155
Product Specifications
- Other Name: Condenser Assembly, A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Condenser Part Number: 52462563
Product Specifications
- Other Name: Condenser, A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- LeSabre | 1994-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1994-1996 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Condenser Part Number: 10339103
Product Specifications
- Other Name: Condenser, A/C; A/C Condenser; Condenser A/C; Condenser, A/C Condenser
- Replaces: 10430003, 10315135, 10326292, 10420262, 10331989
Fits the following Buick Models:
- Rendezvous | 2002-2005 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
Buick Condenser Part Number: 52450901
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skylark | 1989-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Condenser Part Number: 3090686
Product Specifications
- Other Name: Condenser Assembly, A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skyhawk | 1986 | Custom, Limited, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Buick Condenser Part Number: 3095774
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skyhawk | 1988 | Custom, SE | 4 Cyl 2.0 L GAS
View related parts
Buick Condenser Part Number: 3055363
Product Specifications
- Other Name: Condenser Assembly, A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Condenser Part Number: 3093377
Product Specifications
- Other Name: A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skylark | 1985-1988 | Custom, Limited | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Condenser Part Number: 3095000
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skyhawk | 1987 | Custom, Limited, Sport, T-Type | 4 Cyl 2.0 L GAS
View related parts
Buick Condenser Part Number: 3092740
Product Specifications
- Other Name: Condenser Assembly, A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skyhawk | 1987 | Custom, Limited, Sport, T-Type | 4 Cyl 2.0 L GAS
View related parts
Buick Condenser Part Number: 52451530
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Regal | 1988 | Custom, Limited | 6 Cyl 2.8 L GAS
View related parts
Buick Condenser Part Number: 52467763
Product Specifications
- Other Name: Condenser Assembly, A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- Skylark | 1992-1993 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Condenser Part Number: 3095844
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaced by: 52482102
Fits the following Buick Models:
- Electra | 1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1989-1991 | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Condenser Part Number: 52456333
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
Fits the following Buick Models:
- LeSabre | 1992-1993 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1991-1993 | Base, Ultra | 6 Cyl 3.8 L GAS

| Page 1 of 3 |Next >

1-20 of 53 Results

Buick A/C Condenser

Choose OEM A/C Condenser, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick A/C Condenser. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick A/C Condenser instantly transforms hot refrigerant in cool liquid, which maintains cabin temperatures within normal range. Buick was founded in 1903, it was known as a quiet rider with a lot of confidence in road manners. The entire mix across the generations which combined traditionally and smartly enhanced lines suited daily commute routes and any impromptu trip. QuietTuning cabins mute the wind, and potholes are absorbed by smooth powertrains. Dashboards are not new but contain the technology that most drivers are now accustomed to, which makes moving out of an old sedan in an older model to a new crossover natural. The Wildcat EV concept is an indication of the future when the badge will combine silent electric propulsion with the same calm steering that longtime owners are accustomed to. Families, first-time buyers and retirees continue to appear because they need a convenient drive that does not appear bad. The A/C Condenser is mounted in front of the radiator and cools the high-pressure gaseous refrigerant to liquid state as air passes through the slender aluminum tubes removing the heat. Its perch exchanges cool air with the radiator but remains open to get rid of thermal load in gridlock or mountain passes. Good welds and anti-corrosion fins shake off grit and therefore summer idling will not bake the cabin. The low refrigerant temperatures of the A/C Condenser protect the compressor, reduce fuel consumption by preventing a strain on the system, and above all help to keep the passengers cool even though the car is a small SUV or a spacious sedan.

Buick A/C Condenser Parts and Q&A

Condenser Assembly
89019322
Q: How to replace the A/C Condenser in the HVAC system on Buick LaCrosse?
A:
As the initial step to replace the hvac system condenser technicians must recover all refrigerant present. The procedure starts with Radiator removal before you cut the a/c line coupling free between condenser tube and evaporator tube. The procedure starts by removing the a/c compressor line nut from the condenser while placing the compressor line safely to the side. Afterward, take the condenser out of the vehicle. Throw away both o-ring seals and seal washer pieces. A new condenser requires installation of refrigerant oil during setup. Fitting the new condenser into the vehicle requires the application of both a new a/c compressor hose seal washer and new o-ring seals to the area between the evaporator and condenser tubes. Install the Radiator first and join the evaporator tube to the condenser tube before connecting the a/c line coupling to both tubes. When attaching the a/c compressor hose to the condenser always use a 20mm wrench or pliers to hold the A/C Condenser block fitting steady while torquing the a/c line nut. Use a 20 mm wrench or pliers to hold the A/C Condenser block fitting until you tighten its nut to 17 n.m (12.5 lb ft). The a/c system evacuation and recharging process concludes with a leak inspection of fittings through the halogen leak detector (J 39400-A).
Condenser Assembly
52479857
Q: How to replace the A/C Condenser in an A/C system on Buick Regal?
A:
Air cleaner assembly removal and duct assembly follow to start the condenser replacement process along with cross vehicle brace if installed. Refrigerant recovery follows while removing the Radiator with subsequent detaching of the liquid line nut from the condenser and placing the liquid line safely aside. To take out the condenser first remove the compressor line nut then place the compressor line aside and then remove the condenser. When installing your new condenser begin by applying mineral base 525 viscosity refrigerant oil to new o-ring seals then secure them onto compressor hose and liquid line. First join the liquid line to the condenser before tightening the liquid line nut to 27 n.m tension (20 lb ft torque). Then join the compressor hose to the condenser and tighten the compressor hose nut to 16 n.m torque (12 lb ft torque). The Radiator receives replacement before the a/c system undergoes evacuation, charge operations, and leak testing occurs. Guide the replacement of both the air cleaner and duct assembly with the cross vehicle brace if available.