How to replace the knock sensor for Bank 2 on 2009 Chevrolet Equinox?

The vehicle's elevation and support setup is required before knock sensor replacement for Bank 2. Use a wrench to remove the bolt holding the knock sensor in place. After removing the connector from the wiring harness electrical connector disconnect the knock sensor from its mounting position. New knock sensor threadings already contain factory-coating that requires no threadlocker application because added material can potentially limit its detonation detection ability. Keep vehicle damage to a minimum by following proper steps for fasteners. Fasten the knock sensor in position on the engine and torque the bolt to 25 Nm with 18 lb ft of torque. Reconnect the engine wiring harness electrical connector to the knock sensor before lowering the vehicle into position.

OEM 2009 Chevrolet Equinox Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Knock Sensors found

View related parts
2009 Chevrolet Equinox Knock Sensor Part Number: 12618603
$37.07 MSRP: $69.61
You Save: $32.54 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12566845
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12618603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Equinox Knock Sensor Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
2009 Chevrolet Equinox Knock Sensor Part Number: 12729597
$18.81 MSRP: $35.32
You Save: $16.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12692505, 12605738, 12636736
- Condition: New
- SKU: 12729597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Chevrolet Equinox Submodels:
- L, LS, LT, LTZ, Premier, RS, Sport | 4 Cyl 1.5 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2009 Chevrolet Equinox Knock Sensor

With a comprehensive array of OEM 2009 Chevrolet Equinox Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Equinox Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Equinox Knock Sensor Parts and Q&A

Q: How to replace the knock sensor for Bank 2 on 2009 Chevrolet Equinox?
A: The vehicle's elevation and support setup is required before knock sensor replacement for Bank 2. Use a wrench to remove the bolt holding the knock sensor in place. After removing the connector from the wiring harness electrical connector disconnect the knock sensor from its mounting position. New knock sensor threadings already contain factory-coating that requires no threadlocker application because added material can potentially limit its detonation detection ability. Keep vehicle damage to a minimum by following proper steps for fasteners. Fasten the knock sensor in position on the engine and torque the bolt to 25 Nm with 18 lb ft of torque. Reconnect the engine wiring harness electrical connector to the knock sensor before lowering the vehicle into position.