How to replace the Crankshaft Position Sensor on 2009 Chevrolet Equinox?

Before starting the replacement of the Crankshaft Position Sensor drivers must lift the vehicle. Using a socket and wrench remove the Crankshaft Position (CKP) sensor nut while also removing the CKP sensor from the engine block after unplugging its electrical connector. If the sensor will be used again, check it for signs of wear or cracks or leakage before reinstallation. Before mounting the CKP sensor onto the block the O-ring needs oil lubrication using clean engine oil and you must replace any defective O-rings. Apply a 97-lb in (11 Nm) torque when installing the CKP sensor nut. Proceed by reconnecting the CKP sensor electrical connector then lower the vehicle before performing the Crankshaft Position System Variation Learn operation.

OEM 2009 Chevrolet Equinox Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2009 Chevrolet Equinox Crankshaft Position Sensor Part Number: 12613030
$36.50 MSRP: $68.55
You Save: $32.05 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12590991
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 2.2 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12613030
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Equinox Crankshaft Position Sensor Part Number: 12598208
$24.51 MSRP: $46.02
You Save: $21.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 12591007
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12598208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2009 Chevrolet Equinox Crankshaft Position Sensor

With a comprehensive array of OEM 2009 Chevrolet Equinox Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Equinox Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Equinox Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2009 Chevrolet Equinox?
A: Before starting the replacement of the Crankshaft Position Sensor drivers must lift the vehicle. Using a socket and wrench remove the Crankshaft Position (CKP) sensor nut while also removing the CKP sensor from the engine block after unplugging its electrical connector. If the sensor will be used again, check it for signs of wear or cracks or leakage before reinstallation. Before mounting the CKP sensor onto the block the O-ring needs oil lubrication using clean engine oil and you must replace any defective O-rings. Apply a 97-lb in (11 Nm) torque when installing the CKP sensor nut. Proceed by reconnecting the CKP sensor electrical connector then lower the vehicle before performing the Crankshaft Position System Variation Learn operation.