How to replace the outer CV Boot and CV Joint on 2008 Chevrolet Uplander?

Remove the large seal clamp from the CV joint, avoiding boot damage. Cut the swage ring, separate and slide off the seal, wipe grease, spread and remove the retaining ring, discard the old seal. Remove balls, cage, and inner race; clean, inspect, install new seal and clamp, grease and reassemble.

OEM 2008 Chevrolet Uplander CV Joint

CV Joint Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 CV Joint found

View related parts
2008 Chevrolet Uplander Axle Assembly Part Number: 88967242
Product Specifications
- Other Name: Shaft Kit, Rear Axle Drive; CV Axle Assembly; Axle Shaft; CV Joint; CV Axle; Inner CV Joint; Outer CV Joint; Joint Kit, Rear Axle Universal Joint.
- Position: Rear
- Replaces: 10424907, 88891077
- Item Weight: 16.50 Pounds
- Item Dimensions: 35.0 x 6.5 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88967242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander CV Joint

With a comprehensive array of OEM 2008 Chevrolet Uplander CV Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander CV Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander CV Joint Parts and Q&A

Q: How to replace the outer CV Boot and CV Joint on 2008 Chevrolet Uplander?
A: Remove the large seal clamp from the CV joint, avoiding boot damage. Cut the swage ring, separate and slide off the seal, wipe grease, spread and remove the retaining ring, discard the old seal. Remove balls, cage, and inner race; clean, inspect, install new seal and clamp, grease and reassemble.