OEM 2008 Chevrolet Impala Steering Angle Sensor

2008 Chevrolet Impala Steering Angle Sensor Parts and Q&A

• Q: How to replace the Steering Angle Sensor or Steering Shaft Lower Bearing on 2008 Chevrolet Impala?

  A: Before handling either the Steering Angle Sensor or steering shaft lower bearing you must disable the sir system. Start by taking the Steering Column out of the vehicle. You must detach these elements from the steering shaft: boot seal and steering shaft seal and sensor retainer and sensor locator. The boot seal and steering shaft seal together with the sensor retainer and sensor locator form part of the required installation components. Next remove the Steering Angle Sensor from its installation position. Succeeding the adapter removal and bearing assembly extraction from the steering jacket assembly. Start installation by joining the adapter and bearing assembly to the steering jacket assembly. The installation process begins with adding these components to the steering shaft: Steering Angle Sensor followed by sensor locator then sensor retainer and finally steering shaft seal and boot seal. Installation of Steering Angle Sensor requires sensor locator and sensor retainer together with steering shaft seal and boot seal. Reinstall the Steering Column to your vehicle while enabling the sir system.